Ingco AC202481E 24L Air Compressor User Manual

1. Уводзіны

1.1 Інфармацыя па бяспецы

Always read and understand all safety warnings and instructions before operating this air compressor. Failure to follow these instructions may result in electric shock, fire, and/or serious injury. Keep this manual for future reference.

1.2 Выкарыстанне па прызначэнні

The Ingco AC202481E air compressor is designed for various pneumatic applications, including tire inflation, dust blowing, painting, nailing, and spraying. It is suitable for domestic and light professional use. Do not use this compressor for purposes other than those specified in this manual.

2. Прадукт скончыўсяview

2.1 Кампаненты

The Ingco AC202481E air compressor features a 24-liter air tank, an electric motor, an oil-lubricated pump, pressure gauges for tank and regulated pressure, a pressure regulator, a safety valve, and a drain valve. Familiarize yourself with all components before operation.

3. Настройка

3.1 Распакаванне

Carefully remove the compressor from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. Report any damage to your supplier immediately. Ensure all components are present.

3.2 Oil Filling and Level Check

This compressor uses an oil-lubricated pump. Before first use, and regularly thereafter, check the oil level. Ensure the oil level is between the minimum and maximum marks on the dipstick or sight glass. If necessary, add appropriate compressor oil. Refer to the oil cap for specific instructions on checking the level.

3.3 Электрычнае падключэнне

Connect the compressor to a grounded power outlet with a voltage of 220-240V. Ensure the electrical circuit can handle the compressor's 1.0 kW power consumption. Do not use extension cords unless absolutely necessary, and if used, ensure they are rated for the compressor's power requirements and are properly grounded.

4. Інструкцыя па эксплуатацыі

4.1 Запуск кампрэсара

1. Ensure the drain valve at the bottom of the tank is closed.
2. Connect your pneumatic tool to the quick coupler.
3. Падключыце кампрэсар да адпаведнай разеткі.
4. Turn the power switch to the 'ON' position. The compressor will start to build pressure until it reaches its maximum operating pressure of 8 bar, then it will automatically shut off.

4.2 Рэгуляванне ціску

Use the pressure regulator knob to adjust the output air pressure to suit your tool's requirements. The regulated pressure will be displayed on the corresponding gauge. Always set the pressure according to the tool manufacturer's recommendations.

4.3 Выключэнне

1. Павярніце выключальнік харчавання ў становішча «ВЫКЛ».
2. Адключыце кампрэсар ад сілкавання.
3. Bleed any remaining air from the tank by opening the drain valve or using an air tool until the tank pressure gauge reads zero.
4. Close the drain valve after all air and condensation have been expelled.

5. Тэхнічнае абслугоўванне

5.1 Штодзённае тэхнічнае абслугоўванне

• Drain Condensation: After each use, or daily if used frequently, drain the condensation from the air tank by opening the drain valve. This prevents rust and extends tank life.

5.2 Рэгулярнае тэхнічнае абслугоўванне

• Праверце ўзровень алею: Check the oil level before each use. Change the oil according to the manufacturer's recommendations or every 50-100 operating hours, whichever comes first.
• Чысты паветраны фільтр: Inspect and clean the air filter regularly. A clogged filter reduces compressor efficiency. Replace if damaged.
• Праверце шлангі і фітынгі: Check all air hoses and fittings for wear, cracks, or leaks. Replace any damaged components.

5.3 Захоўванне

When storing the compressor, ensure the tank is completely drained of air and condensation. Store in a clean, dry, and well-ventilated area, protected from extreme temperatures and moisture.

6. Выпраўленне непаладак

У гэтым раздзеле прыведзены рашэнні распаўсюджаных праблем з эксплуатацыяй. Калі ў вас праблемы, якія не пералічаны тут, звярніцеся ў службу падтрымкі кліентаў.

• Problem: Compressor does not start.
  рашэнне: Check power connection, ensure the power switch is ON, check the circuit breaker or fuse. Verify the voltagэлектронная пастаўка.
• Problem: Low air pressure or compressor runs continuously.
  рашэнне: Check for air leaks in hoses or fittings. Ensure the pressure regulator is set correctly. Inspect the air filter for blockage.
• Problem: Excessive noise or vibration.
  рашэнне: Check for loose bolts or components. Ensure the compressor is on a stable, level surface. Verify the oil level is correct.
• Problem: Moisture in air output.
  рашэнне: Ensure the tank is drained daily. Consider using an inline air dryer for sensitive applications.

7. Тэхнічныя характарыстыкі

8. Гарантыя і падтрымка

The Ingco AC202481E air compressor pump is covered by a 1000-hour warranty. For specific warranty terms, conditions, and duration, please refer to the warranty card included with your purchase or contact your authorized Ingco dealer. Keep your purchase receipt as proof of purchase for any warranty claims.

For technical support, spare parts, or service, please contact your local Ingco service center or visit the official Ingco webсайт для кантактнай інфармацыі.

Note: Warranty periods and support availability may vary by region. Always consult local regulations and your purchase documentation for specific details.