Кіраўніцтва карыстальніка пульта дыстанцыйнага кіравання LEDONE

1. Уводзіны

This manual provides comprehensive instructions for the LEDONE Remote Control, designed for use with Motion Detection, UFO High Bay, Parking Lot Light, and Linear High Bay Lights (specifically HD406VRH Sensor compatible). This remote enhances convenience and control over your lighting systems, allowing for customization of various settings to optimize performance and energy efficiency in commercial spaces.

2. Асаблівасці прадукту

• Direct control over LED high bay light processes.
• Four pre-programmed fixed scene modes for automatic settings.
• Controls UFO High Bay lights and integrated motion detection sensors.
• Customizable brightness and motion sensor settings.
• Includes essential functions: On/Off, Auto mode, and Reset for straightforward operation.

3. Настройка

3.1 Устаноўка батарэі

The LEDONE Remote Control requires 'A' type batteries (not included). To install:

1. Знайдзіце крышку батарэйнага адсека на задняй частцы пульта дыстанцыйнага кіравання.
2. Адсуньце вечка ў кірунку, паказаным стрэлкай.
3. Insert the 'A' batteries, ensuring correct polarity (+ and -) as marked inside the compartment.
4. Зачыніце вечка батарэйнага адсека, пакуль яна надзейна не зашчоўкнецца.

3.2 Пачатковае падключэнне

The remote control is designed to work seamlessly with compatible LEDONE UFO High Bay and Linear High Bay Lights equipped with HD406VRH sensors. No complex pairing is typically required; the remote should function upon battery installation and being within range of the compatible light fixture.

4. Інструкцыя па эксплуатацыі

Азнаёмцеся з кампаноўкай пульта дыстанцыйнага кіравання:

Figure 1: LEDONE Remote Control Layout

4.1 Асноўныя функцыі

• ВКЛ/ВЫКЛ: Press to toggle the connected light fixture on or off.
• Аўтаматычны рэжым: Activates the automatic operation mode, utilizing the sensor's default or previously set parameters.
• Скінуць: Resets all settings on the connected light fixture to their factory default values.
• Яркасць (+/-): Adjusts the light output intensity.

4.2 Дадатковыя налады

The remote allows for precise customization of sensor and lighting parameters:

• Пачаць: Initiates the application of selected settings.
• Памяць: Saves the current custom settings for quick recall.
• Ужыць: Applies the settings stored in memory or the currently selected custom settings.

Далёкасць выяўлення

Select the desired motion detection sensitivity:

• 25%, 50%, 75%, 100%: Choose the percentage of the sensor's maximum detection range.

Час утрымання

Sets the duration the light remains at full brightness after motion is detected and before dimming or turning off:

• 5s, 30s, 1min, 3min, 5min, 10min, 15min, 30min: Select the hold time in seconds or minutes.

Узровень зацямнення ў рэжыме чакання

Determines the light output level during the stand-by period (after hold time and before turning off):

• 10%, 20%, 30%, 50%: Set the dimming percentage.

Перыяд чакання

Sets the duration the light remains at the stand-by dimming level before turning off completely:

• 0s, 10s, 30s, 1min, 5min, 10min, 30min, +∞: Select the stand-by period. '+∞' indicates the light will remain at the stand-by dimming level indefinitely.

Датчык дзённага святла

Configures the ambient light threshold at which the motion sensor will activate the light:

• 2Lux, 10Lux, 30Lux, 50Lux, 80Lux, 120Lux: Light will only turn on if ambient light is below the selected Lux level.
• Адключыць: The daylight sensor is deactivated, and the light will respond to motion regardless of ambient light.

Тэст (2 с)

Activates a 2-second test mode to verify sensor functionality and current settings.

5. Тэхнічнае абслугоўванне

To ensure optimal performance and longevity of your LEDONE Remote Control:

• Уборка: Працірайце пульт мяккай сухой тканінай. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі.
• Замена батарэі: Replace batteries when the remote's response becomes sluggish or inconsistent. Always use new 'A' type batteries.
• захоўванне: Захоўвайце пульт у прахалодным, сухім месцы, удалечыні ад прамых сонечных прамянёў і экстрэмальных тэмператур.
• Пазбягайце вільгаці: Do not expose the remote to water or high humidity.

6. Выпраўленне непаладак

If you encounter issues with your LEDONE Remote Control, refer to the following common problems and solutions:

• Пульт не адказвае:
  • Праверце ўстаноўку батарэі і пры неабходнасці заменіце батарэі.
  • Ensure there are no obstructions between the remote and the light fixture's sensor.
  • Verify that the light fixture is powered on and functioning correctly.
• Settings not applying:
  • Ensure you are pressing the 'Apply' or 'Start' button after making changes.
  • Confirm the remote is within effective range of the light fixture.
  • Try resetting the light fixture using the 'Reset' button on the remote, then re-apply settings.
• Абмежаваны дыяпазон:
  • Заменіце батарэйкі на новыя.
  • Пераканайцеся, што паблізу няма моцных крыніц перашкод (напрыклад, іншых бесправадных прылад).

7. Тэхнічныя характарыстыкі

8. Гарантыя і падтрымка

LEDONE is committed to providing quality lighting solutions and customer satisfaction. Our products are designed for optimal performance and safety. For any inquiries, technical assistance, or warranty information, please contact LEDONE customer service. LEDONE is based in California, offering worry-free services for our products.