ОЙЦЁУ 100 Amp MPPT Solar Charge Controller 12V/24V User Manual

1. Уводзіны

Thank you for choosing the OOYCYOO 100 Amp MPPT Solar Charge Controller. This device is designed to efficiently manage power flow from your solar panels to your battery bank, ensuring optimal charging and system protection. It is compatible with 12V and 24V battery systems and supports various battery types including AGM, Sealed, Gel, Flooded, and Lithium batteries.

2. Інструкцыі па тэхніцы бяспекі

• Перад устаноўкай і эксплуатацыяй уважліва прачытайце ўсе інструкцыі.
• Ensure all wiring is correctly polarized (positive to positive, negative to negative) to prevent damage.
• Always connect the battery to the charge controller first, before connecting solar panels. Disconnect solar panels first, then the battery.
• Use appropriate wire gauges for all connections to handle the rated current.
• Install the controller in a well-ventilated area to prevent overheating.
• Пазбягайце кароткіх замыканняў і падключэнняў з няправільнай палярнасцю.
• Не спрабуйце разбіраць або рамантаваць кантролер самастойна. Звярніцеся да кваліфікаванага персаналу для абслугоўвання.

3. Асаблівасці прадукту

• MPPT (Maximum Power Point Tracking) technology for efficient solar energy harvesting (≥99% tracking rate, >98% conversion rate).
• Аўтаматычная сістэма 12V/24Vtagідэнтыфікацыя.
• Compatibility with multiple battery types: USER (customizable for Lithium, LiFePO4, Li(NiCoMn)O2), Flooded, Sealed, and Gel batteries.
• User-programmable settings for absorption voltagе, плывучы абtagе, і нізкі абtagе адключыцца.
• Comprehensive protection features: PV over current/power, PV short circuit, PV reverse polarity, night reverse charging, battery reverse polarity, battery over voltage, battery over discharge, battery overheating, controller overheating, lithium battery low temperature, load short circuit, load overload, TVS high voltagэлектронныя пераходныя працэсы.
• Built-in cooling fan with intelligent temperature control (ON >45℃, OFF <40℃) and porous heat dissipation for extended lifespan.
• Blacklight LCD Display showing charge amount (KWH) and other parameters.
• Max PV input power: 1300W (12V system), 2600W (24V system).
• Макс. PV адкрытай ланцуга абtage: 100 В пастаяннага току.

4. Змесціва ўпакоўкі

• 1 x OOYCYOO 100A MPPT Solar Charge Controller
• 1 х датчык тэмпературы
• 1 х Кіраўніцтва карыстальніка (на англійскай мове)

5. Тэхнічныя характарыстыкі

6. Усталёўка і налада

6.1. Unboxing and Overview

Upon unboxing, inspect the charge controller for any visible damage. Familiarize yourself with the device's layout and connection points.

6.2. Мантаж

Mount the charge controller vertically on a non-flammable surface in a dry, well-ventilated area, away from direct sunlight and heat sources. Ensure sufficient clearance around the unit for proper airflow, especially around the cooling fans.

6.3. Падключэнне правадоў

Follow the wiring sequence carefully to avoid damage to the controller or batteries. The controller accepts up to 6 AWG wire for main power connections. Ensure all connections are tight and secure.

1. Падключэнне батарэі: Connect the battery cables to the BATTERY terminals on the controller first. Ensure correct polarity (positive to positive, negative to negative).
2. Падключэнне панэлі сонечных батарэй: Connect the solar panel cables to the SOLAR PANEL terminals. Ensure correct polarity.
3. Падключэнне нагрузкі (неабавязкова): If using the DC load output, connect your DC loads to the DC LOAD terminals. Ensure correct polarity.
4. Датчык тэмпературы: Plug the included temperature sensor into the designated port. Attach the sensor to the battery for accurate temperature compensation during charging.

For a visual guide on setting up a solar system with a charge controller and inverter, refer to the video below:

6.4. Пачатковая канфігурацыя

After all connections are made, the controller will power on. You may need to configure the battery type and system voltage if it's not automatically detected or if you are using a custom battery type like Lithium.

The controller features a blacklight LCD display for easy monitoring and configuration. Use the buttons to navigate through the menu and adjust settings as needed. For detailed instructions on setting battery parameters, refer to the specific section in the printed user manual.

7. Інструкцыя па эксплуатацыі

The LCD display provides real-time information about your solar system. Use the navigation buttons (Menu, Up, Down, Enter) to view different parameters and access settings.

7.1. LCD Display Overview

The display shows various parameters such as:

• П.В.Тtagе і ток
• Акумулятар Voltage and Charging Current
• Нагрузка Voltagе і ток
• Ёмістасць батарэі ў працэнтахtage
• Тэмпература навакольнага асяроддзя
• Cumulative Power Generation (KWH)
• Error/Fault Indicators

7.2. Setting Battery Parameters

To optimize charging for your specific battery type, you can adjust parameters like absorption voltagе, паплавок абtagе, і нізкі абtage disconnect. Consult the detailed instructions in the full user manual for precise steps on how to enter the settings menu and modify these values.

7.3. Кантроль нагрузкі

The controller features a programmable load timer. You can set the load to turn on/off at specific times or based on battery voltage levels. This feature helps conserve battery power and manage your DC loads efficiently.

8. Тэхнічнае абслугоўванне

• Рэгулярна правярайце ўсе злучэнні правадоў на надзейнасць і наяўнасць карозіі.
• Keep the controller's cooling vents clear of dust and debris to ensure proper heat dissipation.
• Перыядычна правярайце клемы акумулятара на наяўнасць карозіі і пры неабходнасці чысціце іх.
• Сачыце за наяўнасцю на ВК-дысплеі кодаў памылак або незвычайных паказанняў.

9. Выпраўленне непаладак

If you encounter issues with your OOYCYOO MPPT Solar Charge Controller, refer to the following general troubleshooting tips:

• Няма дысплея/няма харчавання: Праверце падключэнні акумулятара і пераканайцеся ў яго наяўнасціtage is above the minimum operating voltage.
• Без зарадкі: Verify solar panel connections and ensure sufficient sunlight. Check for any PV over current/short circuit protection activation.
• Battery Over-Discharge: Адрэгулюйце нізкі ўзровень гучнасціtage disconnect setting if necessary. Ensure your loads are not exceeding the battery's capacity.
• Коды памылак: Consult the full user manual for a list of specific error codes and their corresponding solutions.

For issues related to battery activation or if your battery is not working as expected, the following video provides helpful steps:

10. Гарантыя і падтрымка

For warranty information, technical support, or service inquiries, please refer to the contact details provided in your product packaging or visit the OOYCYOO official webсайт. Захоўвайце чэк аб куплі як пацверджанне пакупкі.