BOYA BY-M1S

BOYA BY-M1S Lavalier Microphone User Manual

Model: BY-M1S

1. Уводзіны

The BOYA BY-M1S is a professional omnidirectional lavalier condenser microphone designed for high-quality audio recording. It is compatible with a wide range of devices, including smartphones, DSLR cameras, camcorders, audio recorders, and personal computers. This manual provides detailed instructions for setting up, operating, and maintaining your BY-M1S microphone.

BOYA BY-M1S Lavalier Microphone
Figure 1: BOYA BY-M1S Lavalier Microphone

2. Асаблівасці прадукту

  • Omnidirectional Capsule: Captures broadcast-quality sound from a 360-degree range.
  • Plug and Play: No batteries or drivers required for most smartphone applications.
  • Доўгі кабель: Features a 6-meter (20-foot) cable for extended reach.
  • Шырокая сумяшчальнасць: Supports smartphones, DSLR cameras, camcorders, audio recorders, tablets, and laptops.
  • Device Mode Switch: Easily switch between "Smartphone" and "Camera" modes.
  • Аксэсуары ў камплекце: Comes with a metal clip for secure attachment and a foam windscreen to reduce wind noise.
BOYA BY-M1S Microphone Components
Figure 2: Key components of the BY-M1S microphone, including the omnidirectional mic capsule, camera/smartphone switch, clothing clip, and 3.5mm connector.

3. Змесціва ўпакоўкі

The BOYA BY-M1S package includes the following items:

  • BY-M1S Lavalier Microphone
  • Заціск для адвароту
  • Пенапластавае ветравое шкло
  • Сумка для пераноскі (можа адрознівацца ў залежнасці ад рэгіёна)

4. Інструкцыі па ўсталёўцы

4.1 Падключэнне мікрафона

  1. Attach the metal clip to the microphone body.
  2. Securely clip the microphone to your clothing, approximately 15-20 cm (6-8 inches) from your mouth, for optimal sound capture.
  3. Place the foam windscreen over the microphone capsule to reduce plosives and wind noise.
Lavalier Microphone with Clip
Figure 3: Microphone with lapel clip attached.

4.2 Падключэнне да прылад

The BY-M1S features a 3.5mm TRRS connector for broad compatibility.

  • Для смартфонаў/планшэтаў:

    Plug the 3.5mm connector directly into your device's headphone/microphone jack. Ensure the switch on the microphone's control module is set to "Smartphone" mode. For iOS devices without a 3.5mm jack, a 3.5mm to Lightning adapter (not included) is required.

  • For DSLR Cameras/Camcorders/Audio Recorders/PCs:

    Plug the 3.5mm connector into the microphone input jack of your device. Set the switch on the microphone's control module to "Camera" mode. For PCs with separate headphone and microphone jacks, you may need a 3.5mm TRRS to TRS adapter (not included).

BOYA BY-M1S Plug and Play
Figure 4: The BY-M1S microphone showing its 3.5mm connector and control module with the Camera/Smartphone switch.

5. Інструкцыя па эксплуатацыі

5.1 Выбар рэжыму

The control module on the microphone cable features a switch to select the appropriate operating mode:

  • Smartphone Mode: Use this setting when connecting to smartphones, tablets, or other devices that use a TRRS input.
  • Рэжым камеры: Use this setting when connecting to DSLR cameras, camcorders, audio recorders, or other devices that use a TRS input.

Always ensure the switch is set to the correct mode for your recording device to prevent audio issues.

5.2 Recording Tips

  • Размяшчэнне мікрафона: For clear audio, position the microphone approximately 6-8 inches (15-20 cm) from the sound source.
  • Асяроддзе: Record in a quiet environment to minimize background noise. The omnidirectional pattern picks up sound from all directions, including ambient noise.
  • Кабельнае кіраванне: Use the included cable tie to manage the extra-long cable and prevent tangles or accidental disconnections.
  • Маніторынг: If your recording device allows, monitor your audio with headphones during recording to ensure optimal sound levels and quality.

6. Тэхнічнае абслугоўванне

  • Уборка: Use a soft, dry cloth to clean the microphone body and cable. Do not use liquid cleaners or solvents.
  • захоўванне: Store the microphone in its carrying pouch when not in use to protect it from dust and physical damage. Avoid extreme temperatures and humidity.
  • Сыход за кабелем: Do not sharply bend or pull the cable. Coil it loosely for storage.

7. Выпраўленне непаладак

праблема Магчымая прычына Рашэнне
Няма гуку або нізкі ўзровень гучнасці.
  • Incorrect mode selected (Smartphone/Camera).
  • Мікрафон не цалкам падключаны.
  • Гучнасць прылады занадта нізкая.
  • Incorrect input selected on device.
  • Ensure the switch is set to the correct mode for your device.
  • Firmly plug the 3.5mm connector into the device's audio jack.
  • Павялічце гучнасць запісу на вашай прыладзе.
  • Select the external microphone as the audio input source in your device settings.
Дрэнная якасць гуку (напрыклад, прыглушаны, скажоны).
  • Microphone too far or too close.
  • Wind noise or plosives.
  • Высокі фонавы шум.
  • Adjust microphone placement to 6-8 inches from the sound source.
  • Ensure the foam windscreen is properly installed.
  • Запісвайце ў больш ціхім асяроддзі.
Microphone not recognized by iOS device.
  • Missing Lightning adapter.
  • An official Apple 3.5mm to Lightning adapter is required for newer iOS devices without a 3.5mm jack.

8. Тэхнічныя характарыстыкі

Спецыфікацыя Дэталь
Палярны ўзор Усенакіраваны
АЧХ 18 кГц
Аўдыё Адчувальнасць 30 дэцыбел
Стаўленне сігнал / шум 78 дБ
Імпеданс 1000 Ом
Даўжыня кабеля 6 метраў (20 футы)
Тып раздыма 3.5 mm TRRS Jack
Крыніца харчавання Battery Powered (no internal battery, powered by device in smartphone mode, or external battery for camera mode if applicable)
Вага прадмета 68 грам
Памеры (Д х Ш х У) 12 x 6 x 15 Centimeters (Product Dimensions)

9. Гарантыя і падтрымка

BOYA забяспечвае адзін год гарантыі for the BY-M1S microphone. This warranty covers manufacturing defects and ensures product quality.

For technical support, warranty claims, or any questions regarding your BOYA BY-M1S microphone, please contact BOYA customer service through their official website or the retailer where the product was purchased. Please have your purchase receipt and product model number (BY-M1S) available when contacting support.