eRapta HD 1080p Backup Camera System Kit (Model AYX104)

1. Уводзіны

This manual provides detailed instructions for the installation, operation, and maintenance of your eRapta HD 1080p Backup Camera System Kit. This system is designed to enhance driving safety and visibility for various large vehicles, including RVs, trailers, motorhomes, trucks, campers, tractors, and box trucks, operating on a DC 12-24V power supply. It features a 10-inch high-resolution monitor with quad-split display capabilities and four IP69K waterproof cameras for comprehensive surveillance.

Figure 1: eRapta HD 1080p Backup Camera System Kit showing the 10-inch monitor and four cameras.

2. Інфармацыя па бяспецы

• Рэкамендуецца прафесійная ўстаноўка: For optimal performance and safety, professional installation is advised.
• крыніца харчавання: Ensure the system is connected to a DC 12-24V power source. Incorrect voltage можа пашкодзіць прыладу.
• Праводка: Secure all wiring to prevent interference, short circuits, or damage from vehicle movement and environmental factors.
• Гідраізаляцыя: While cameras are IP69K rated, ensure all cable connections are properly sealed and protected from moisture.
• Бачнасць: Do not obstruct the monitor or camera views. Regularly clean camera lenses for clear images.
• Бяспека кіравання: The camera system is an aid; always perform visual checks and exercise caution while driving or maneuvering your vehicle.

3. Змесціва ўпакоўкі

Праверце, ці ўсе пералічаныя ніжэй прадметы ўваходзяць у вашу ўпакоўку:

• 1x 10-цалевы манітор
• 2x Side Cameras
• 2x Rear Cameras
• 2x 33 ft (10m) Video Cables
• 2x 66 ft (20m) Video Cables
• 1x шнур харчавання
• 2x Monitor Brackets (U-shaped and Fan-shaped)
• 1x Пульт дыстанцыйнага кіравання
• Installation Kits (screws, mounting hardware)

Figure 2: Complete list of components included in the package.

4. Настройка і ўстаноўка

4.1 Мантаж манітора

1. Choose a suitable location on your dashboard or overhead console that does not obstruct your view або перашкаджаць кіраванню аўтамабілем.
2. Attach the chosen bracket (U-shaped or fan-shaped) to the monitor using the provided screws.
3. Securely mount the monitor to the chosen surface. Ensure it is stable and can withstand vehicle vibrations.

4.2 Мантаж камер

The system includes two side cameras and two rear cameras. They can be installed in various positions to cover blind spots.

• Заднія камеры: Typically mounted at the rear of the vehicle, often above the license plate or on the bumper.
• Side Cameras: Mount on the left and right sides of the vehicle, usually near the rear-view mirrors or further back on the vehicle body, depending on the vehicle type (RV, truck, trailer).

Figure 3: Recommended camera installation points for comprehensive coverage.

4.3 Wiring Diagram and Power Connection

Follow the wiring diagram carefully to ensure correct connections. The system supports DC 12-24V power input.

1. Connect the red wire to the positive (+) terminal of an ACC (Accessory) power source.
2. Connect the yellow wire to a constant positive (+) power source.
3. Connect the black wire to a negative (-) ground point.
4. Connect the 4-pin extension cables from the cameras to the monitor's corresponding inputs. Ensure the notches on the connectors are aligned to prevent damage.
5. Трыгерныя правады: The brown, green, blue, and grey trigger wires (for CH1, CH2, CH3, CH4 respectively) can be connected to specific vehicle signals (e.g., reverse light, turn signals) to automatically switch camera views. This connection is optional and depends on your preference.

Figure 4: Wiring connections for the monitor and cameras.

4.4 Арганізацыя кабеляў

Route all cables securely along the vehicle's frame or interior. Use cable ties to prevent loose wires that could interfere with moving parts or become damaged. Ensure cables are protected from heat, sharp edges, and moisture.

5. Інструкцыя па эксплуатацыі

5.1 Уключэнне/выключэнне

The monitor will power on automatically when the vehicle's ignition is turned on (if connected to ACC power) or when the designated power switch is activated. Press the 'POWER' button on the monitor or remote control to manually turn the unit on or off.

5.2 Элементы кіравання маніторам

The monitor features several buttons for navigation and settings adjustment. A remote control is also provided for convenience.

• Рэжым: Cycles through different display modes (single, dual, quad split).
• CH: Selects the active camera channel in single-view рэжым.
• МЕНЮ: Доступ да меню сістэмных налад.
• +/-: Adjusts settings or navigates menu options.
• OK: Пацвярджае выбар.

5.3 Viewрэжымы

The 10-inch monitor supports various viewing configurations:

• Поўны экран: Displays a single camera view.
• Dual Split: Shows two camera views адначасова.
• Чатыры раздзялення: Displays all four camera views at once, providing a comprehensive 360-degree perspective.

Figure 5: Different display modes for multi-camera viewінж.

5.4 Loop Recording and Playback

The built-in DVR supports simultaneous recording from all cameras. The system automatically deletes older content when the SD card is full (up to 128GB supported).

• Запіс: Insert an SD card (up to 128GB) into the monitor. Recording will begin automatically when the system is powered on.
• Прайграванне: Access the 'Playback' option from the main menu to review запісана footage.

Figure 6: Loop recording functionality for continuous video capture.

5.5 Карэкціроўка правілаў паркоўкі

The system allows for customization of parking guidelines to assist with maneuvering. You can adjust width, height, and horizontal position.

Figure 7: Customizable parking assistance lines for precise maneuvering.

5.6 Начное бачанне

The cameras are equipped with infrared lights and multi-layer glass lenses, combined with an ARM DSPS High-speed processor, to provide clear and colorful night images, enhancing visibility in low-light conditions.

Figure 8: Enhanced night vision capabilities for improved low-light visibility.

6. Тэхнічнае абслугоўванне

• Уборка: Regularly clean camera lenses and the monitor screen with a soft, damp тканіна. Пазбягайце абразіўных ачышчальнікаў.
• Гідраізаляцыя: Periodically inspect camera housings and cable connections for any signs of wear or damage. Re-seal any compromised areas with appropriate silicone sealant to maintain IP69K water resistance.
• Праверка кабеля: Check all wiring for fraying, pinches, or loose connections, especially after long trips or exposure to harsh weather.
• Абнаўленні праграмнага забеспячэння: Check the eRapta official webсайт для атрымання даступных абнаўленняў прашыўкі, каб забяспечыць аптымальную прадукцыйнасць і доступ да новых функцый.

Figure 9: Cameras are designed for durability in various weather conditions.

7. Выпраўленне непаладак

7.1 No Signal Displayed

• Check all power connections to the monitor and cameras.
• Ensure all video cables are securely connected and not damaged.
• Verify that the correct camera channel is selected on the monitor.

7.2 Upside-Down Menu After Reset

If the menu appears upside down after a system reset, follow these steps to correct the orientation:

1. Long-press the 'M' button on the monitor for 5 seconds to enter the settings page.
2. Press the 'OK' button repeatedly to navigate through the menu options until you reach the 'Rotation' setting.
3. Use the '-' button to select 'MODE 2' for the correct rotation.
4. Press the 'OK' button four times to save the setting and exit the menu.

Video 1: Guide to fixing an upside-down menu orientation after a system reset.

7.3 Праблемы з якасцю выявы

• Clean camera lenses and monitor screen.
• Check for any physical damage to cameras or cables.
• Ensure proper lighting conditions for optimal image clarity.

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка

eRapta products are designed for reliability and performance. For warranty information, technical support, or assistance with your product, please refer to the contact details provided with your purchase or visit the official eRapta webсайт. Захоўвайце чэк аб куплі як пацвярджэнне пакупкі для гарантыйных прэтэнзій.