ROCKBROS Rear Bike Rack Instruction Manual

Прадукт скончаныview

The ROCKBROS Rear Bike Rack (Model HJ1009-CBR) is an adjustable, quick-release bicycle cargo rack designed for transporting items on the back of your bicycle. Constructed from high-strength aluminum alloy, it offers a lightweight yet sturdy solution for carrying loads up to 115 lbs (52 kg). This rack features a full quick-release system for easy installation and removal, W-shaped bars to prevent pannier bags from interfering with tires, and adjustable telescopic rods to fit various bike frames.

Асноўныя характарыстыкі:

• Full Quick Release System: Allows for easy installation and removal from the seat post and bottom rod.
• Трывалая канструкцыя: Made from high-quality aluminum alloy, supporting up to 115 lbs (52 kg).
• Рэгуляваны дызайн: Features adjustable rack length and telescopic rods (3-15cm extension) to accommodate different bicycle sizes.
• Pannier Protection: W-shaped bars are integrated to prevent pannier bags from contacting the bicycle tires.
• Палепшаная бачнасць: Includes a red rear reflector for improved safety during night or low-light conditions.

Важная інфармацыя па бяспецы

Read all instructions carefully before installation and use. Failure to follow these instructions may result in product damage, personal injury, or property damage.

• Абмежаванне вагі: Do not exceed the maximum load capacity of 115 lbs (52 kg). Overloading can compromise stability and safety.
• Сумяшчальнасць: This rack is designed for most 26"-29" mountain bikes. It is не падыходзіць for bikes with rear suspension, flat tires, soft-tailed frames, carbon fiber frames, or folding bikes.
• Seat Post Diameter: Ensure your seat tube diameter is within 23mm for proper fitment. Use appropriate shims or gaskets if the seat post is too thin.
• Надзейнае мацаванне: Always ensure all bolts, clamps, and quick-release mechanisms are securely tightened before riding. Regularly check for looseness.
• Размеркаванне нагрузкі: Distribute cargo evenly on the rack to maintain bicycle balance and stability.
• Бачнасць: The included red rear reflector enhances visibility. Consider additional lighting for night riding.

Змест пакета

Перад пачаткам усталёўкі пераканайцеся, што ўсе кампаненты наяўныя.

Image: All components of the ROCKBROS Rear Bike Rack, including the main rack body, adjustable support rods, W-shaped side bars, quick-release clamps, reflector, elastic cord, and installation tools.

Тэхнічныя характарыстыкі

• Марка: РОКБРОС
• Нумар мадэлі: HJ1009-CBR
• матэрыял: Алюмініевы сплаў
• колер: Чорны
• Вага прадмета: 1.25 кілаграма (прыблізна 2.75 фунта)
• Грузападымальнасць: 115 фунтаў (52 кг)
• Тып мацавання: Мацаванне задняга сядзення
• Арыентацыя: Тыл
• Сумяшчальны памер колаў: 26" - 29" (most mountain bikes)
• Seat Tube Diameter Compatibility: У межах 23 мм
• Adjustable Rod Extension: 3-15см

Інструкцыя па ўстаноўцы

Follow these steps carefully to install your ROCKBROS Rear Bike Rack. It is recommended to watch the installation video for visual guidance.

1. 1. Prepare the Seat Post Clamp:

   Place two large rubber gaskets inside the quick-release clamp to protect your seat post and ensure a snug fit. If your seat post is thinner, additional gaskets may be required.

   

   Image: A hand placing two black rubber gaskets into the open quick-release clamp mechanism of the bike rack, preparing it for attachment to the seat post.

2. 2. Mount the Rack to the Seat Post:

   Attach the main rack body to the bicycle's seat post using the quick-release clamp. Пераканайцеся, што клamp is positioned correctly and securely tightened. The quick-release lever should be firmly closed.

   

   Image: A close-up of the quick-release clamp being secured around the bicycle's seat post, with the main rack body extending horizontally from it.
3. 3. Adjust Rack Panel Position:

   Adjust the position of the rack panel along the main beam to achieve the desired length and balance over the rear wheel. Use an Allen wrench to loosen and tighten the screws that secure the panel.

   

   Image: A hand using an Allen wrench to adjust the screws on the underside of the main rack beam, allowing the top panel to slide and adjust its position relative to the bike's rear wheel.

4. 4. Mount W-shaped Side Bars (Guardrails):

   Attach the W-shaped side bars to the main rack body. These bars prevent pannier bags from rubbing against the rear wheel. Secure them with the provided bolts and tools.

   

   Image: A hand attaching one of the W-shaped side bars to the main rack structure, securing it with a bolt and washer.

5. 5. Install Telescopic Support Rods:

   Connect the telescopic support rods from the main rack body down to the lower part of your bike frame (e.g., seat stays or chain stays). Ensure the quick-release heads are attached to the bike frame.

   

   Image: A hand securing the lower end of a telescopic support rod to the bicycle's frame near the rear wheel, using a quick-release mechanism.
6. 6. Adjust and Secure Telescopic Rods:

   Adjust the length of the telescopic rods to ensure the rack is level and stable. Tighten all bolts and quick-release levers on the support rods securely. Double-check all connections.

   

   Image: A hand using an Allen wrench to tighten a bolt on the telescopic support rod, ensuring it is securely fastened and the rack is stable.

7. 7. Attach Rear Reflector:

   Slide the red rear reflector onto the designated slot at the back of the rack for increased visibility.

   

   Image: A hand sliding the red rear reflector into the slot at the very back of the bike rack, completing the installation.

8. 8. Канчатковая праверка:

   Before riding, ensure all connections are tight and the rack is stable. Gently push and pull on the rack to confirm it is securely mounted and does not wobble.

   

   Image: A fully installed ROCKBROS Rear Bike Rack on a black mountain bike, viewed from the side, showing the rack securely attached to the seat post and frame.

Інструкцыя па эксплуатацыі

Once installed, the ROCKBROS Rear Bike Rack is ready for use.

• Пагрузка грузу: Place items on the top platform of the rack. For larger items or pannier bags, utilize the W-shaped side bars for support and to keep them clear of the wheels.
• Замацаванне грузу: Use the provided elastic cord or other suitable straps (not included) to securely fasten your cargo to the rack. Ensure items are stable and do not shift during transit.
• Размеркаванне вагі: Distribute the weight of your cargo as evenly as possible to maintain bicycle balance. Avoid placing all weight on one side.
• Бачнасць: Ensure the rear reflector is not obstructed by cargo. If necessary, use additional rear lights, especially when riding at night.
• Quick Release Function: To remove the rack, simply open the quick-release lever on the seat post clamp and detach the lower support rods.

Выява: Два былыяamples of the ROCKBROS bike rack in use: one side shows the rack with pannier bags attached, and the other side shows it with a trunk bag, demonstrating its versatility for carrying different types of cargo.

Тэхнічнае абслугоўванне

Regular maintenance ensures the longevity and safe operation of your bike rack.

• Чысціня: Працярыце стэлаж з рэкламайamp тканінай, каб выдаліць бруд і пыл. Пазбягайце выкарыстання агрэсіўных хімічных рэчываў, якія могуць пашкодзіць пакрыццё.
• Праверка крапяжу: Periodically inspect all bolts, screws, and quick-release mechanisms for tightness. Re-tighten any loose fasteners.
• Агляд пашкоджанняў: Check the aluminum alloy frame and plastic components for any signs of cracks, bends, or other damage. Replace damaged parts immediately.
• змазка: Apply a small amount of lubricant to the quick-release mechanism pivots if they become stiff.

Ліквідацыю непаладак

If you encounter issues with your ROCKBROS Rear Bike Rack, refer to the following common solutions:

• Стойка хістаецца:

  Пераканайцеся, што хуткая здымка клamp on the seat post is fully tightened. Check that the telescopic support rods are securely fastened to both the rack and the bike frame, and that their length is adjusted correctly to provide stable support.

• Pannier Bags Rubbing Tires:

  Verify that the W-shaped side bars are correctly installed and positioned. Adjust the rack's position on the seat post if necessary to provide more clearance.
• Difficulty Installing on Seat Post:

  Confirm your seat tube diameter is within the specified 23mm. Use the provided rubber gaskets to ensure a snug fit. If the seat post is too large, the rack may not be compatible. If too small, add more shims.

• Rack Not Level:

  Adjust the length of the telescopic support rods. Loosen the fasteners, adjust the rod length until the rack platform is level, then re-tighten securely.

Гарантыя і падтрымка

For warranty information or technical support, please contact ROCKBROS customer service. Refer to your purchase documentation or the official ROCKBROS webсайт для кантактных дадзеных.

Інтэрнэт-рэсурсы:

• For additional support and product information, visit the official ROCKBROS Store on Amazon.