1. Уводзіны
The Xetron STC-1000Pro is a versatile digital temperature controller designed for precise temperature management in various environments. It features dual outlets for simultaneous heating and cooling control, a wide temperature range, and user-friendly operation. This manual provides detailed instructions for setting up, operating, and maintaining your device.
Figure 1: Xetron STC-1000Pro Digital Temperature Controller. This image displays the main unit with its digital display, control buttons, power cord, temperature sensor, and the dual-outlet power strip for heating and cooling devices.
Прыкладанні
The STC-1000Pro is suitable for a wide range of applications requiring accurate temperature control, including:
- Reptile enclosures and terrariums
- Хатняе піваварства і ферментацыя
- Інкубатары
- Цяпліцы
- Акварыумы
- Халадзільнікі
Figure 2: Common applications for the Xetron STC-1000Pro. This image illustrates the controller's use in home brewing, incubators, aquariums, and flower cultivation, highlighting its versatility.
2. Асноўныя магчымасці
- Ideal Temperature Control: Two outlets allow simultaneous or separate connection of heating and cooling equipment for automatic temperature switching. Wide control range of -40 to 230 ℉ (-40 to 110 ℃) with a temperature accuracy of ±1 ℃ / ±2 ℉.
- Зручны дызайн: Simple 3-button operation and pre-wired design for plug-and-play functionality. Large display for easy real-time data reading.
- Падвойная сістэма сігналізацыі: Adjustable high/low temperature alarms with audible beeps and a bell icon on the display, ensuring timely alerts even when not near the device.
- Наладжвальныя параметры: Supports settings for ℃/℉ unit switching, temperature calibration, high and low alarm values, start delay, and protection time (cooling mode only).
- Бяспека і якасць: Constructed from V-0 flame-retardant ABS material. Features compressor delay protection and complies with CE and FCC standards for safe operation.
- Воданепранікальны зонд IP65: The temperature probe head can be immersed in fresh water, and the main unit features an internal rubber ring to prevent water ingress.
Figure 3: Temperature control range of the Xetron STC-1000Pro. This image highlights the controller's ability to maintain temperatures within a desired range of -40 to 230 ℉ using both cooling and heating devices.
Figure 4: Large screen display of the Xetron STC-1000Pro. The image shows the display dimensions and labels for PV (Present Value), SV (Set Value), Csp (Cooling Start Point), and Hsp (Heating Start Point), indicating ℃/℉ switchability.
Figure 5: Visual and audible alert features. This image illustrates the double alarm and delay protection functionalities of the controller, enhancing safety and monitoring.
Figure 6: Safety and quality certifications. The image highlights the V-0 flame-retardant ABS material and compliance with CE, FCC, and RoHS standards, ensuring product safety.
Figure 7: IP65 waterproof features. This image demonstrates the waterproof capability of the temperature probe, which can be immersed in fresh water, and the internal rubber ring for main unit protection.
3. Інструкцыі па ўсталёўцы
- Распакуйце прыладу: Carefully remove the Xetron STC-1000Pro controller and its components from the packaging.
- Connect the Sensor: Ensure the temperature sensor is fully inserted into its dedicated port on the side of the controller. A loose connection can lead to "ERR" display.
- Размясціце датчык: Place the temperature probe in the environment where temperature monitoring and control are required. Ensure it is not directly exposed to heating or cooling elements to get an accurate reading.
- Падключэнне прылад ацяплення/астуджэння:
- Plug your heating device (e.g., heat lamp, heating mat) into the socket labeled "HEATING".
- Plug your cooling device (e.g., fan, chiller) into the socket labeled "COOLING".
Важна: The maximum output for each socket is 10A at 240VAC. Do not connect high-power equipment exceeding these limits.
- Уключэнне: Plug the controller's main power cord into a standard 230V AC power outlet. The display will illuminate, showing the current temperature (PV) and other settings.
Figure 8: Plug-and-play setup of the Xetron STC-1000Pro. This image demonstrates the simplicity of connecting the controller, showing it mounted on a wall next to a terrarium, with heating/cooling devices plugged in.
4. Інструкцыя па эксплуатацыі
The STC-1000Pro features a simple 3-button interface: НАБОР, УВЕРХ (▲), і УНІЗ (▼).
4.1 Дысплей скончыўсяview
- PV (Present Value): Displays the current measured temperature.
- ЗЗ (Усталяванае значэнне): Паказвае зададзеную тэмпературу, якую вы хочаце падтрымліваць.
- Csp (Cooling Start Point): The temperature at which the cooling device will activate.
- Hsp (Heating Start Point): The temperature at which the heating device will activate.
4.2 Устаноўка мэтавай тэмпературы (SV)
- Націсніце НАБОР button once. The SV value will flash.
- Выкарыстоўвайце УВЕРХ (▲) or УНІЗ (▼) кнопкі для рэгулявання мэтавай тэмпературы.
- Прэса НАБОР зноў, каб пацвердзіць і захаваць наладу, або пачакайце некалькі секунд, пакуль яна захаваецца аўтаматычна.
4.3 Advanced Parameter Settings
Каб атрымаць доступ да пашыраных налад, націсніце і ўтрымлівайце НАБОР button for approximately 3 seconds until the display changes to show parameter codes.
Figure 9: Diagram illustrating parameter settings. This image shows the relationship between TS (Temperature Set-point), CD (Cooling Differential), HD (Heating Differential), Csp (Cooling Start Point), and Hsp (Heating Start Point).
Выкарыстоўвайце УВЕРХ (▲) or УНІЗ (▼) buttons to navigate through the parameters. Press НАБОР to enter a parameter's value, then use УВЕРХ (▲) or УНІЗ (▼) наладзіць, і НАБОР зноў захаваць.
| Параметр | Апісанне | Дыяпазон | Па змаўчанні |
|---|---|---|---|
| TS (Temperature Set-point) | The desired target temperature (same as SV). | -40 да 110 ℃ / -40 да 230 ℉ | Вар'іруецца |
| CD (Cooling Differential) | The difference between the cooling start point (Csp) and the set temperature (TS). Cooling activates when PV ≥ TS + CD. | 0.1 to 30 ℃ / 0.1 to 54 ℉ | 2 ℃ / 3.6 ℉ |
| HD (Heating Differential) | The difference between the heating start point (Hsp) and the set temperature (TS). Heating activates when PV ≤ TS - HD. | 0.1 to 30 ℃ / 0.1 to 54 ℉ | 2 ℃ / 3.6 ℉ |
| PT (Protection Time) | Compressor delay protection time (in minutes) for cooling mode only. Prevents frequent compressor cycling. | Ад 0 да 10 хвілін | 3 хвілін |
| CA (Temperature Calibration) | Adjusts the temperature reading to match an external reference thermometer. | -10 да 10 ℃ / -18 да 18 ℉ | 0 ℃ / 0 ℉ |
| CF (Unit Switch) | Switches between Celsius (℃) and Fahrenheit (℉). | C / F | C |
| HA (High Alarm) | Sets the upper temperature limit for the alarm. | TS to 110 ℃ / TS to 230 ℉ | 110 ℃ / 230 ℉ |
| LA (Low Alarm) | Sets the lower temperature limit for the alarm. | -40 ℃ / -40 ℉ to TS | -40 ℃ / -40 ℉ |
After adjusting parameters, press and hold НАБОР again for 3 seconds to exit the advanced settings menu and return to normal operation.
5. Тэхнічнае абслугоўванне
- Уборка: Disconnect the power before cleaning. Wipe the controller's surface with a soft, damp cloth. Do not use abrasive cleaners or immerse the main unit in water. The temperature probe can be cleaned with water.
- захоўванне: Store the device in a dry environment within the temperature range of -20 ℃ to 75 ℃ (-4 ℉ to 167 ℉) to ensure the longest possible lifespan.
- Сыход за датчыкам: Ensure the temperature sensor cable is not pinched or damaged. A damaged sensor can lead to inaccurate readings or error messages.
6. Выпраўленне непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| "ERR" displayed on screen | Temperature sensor not fully inserted or damaged; temperature exceeds measurement range. | Ensure the sensor is fully inserted into its port. If the issue persists, the sensor may be faulty and require replacement. If the temperature is outside the -40 to 110 ℃ range, the controller will display "ERR". |
| Alarm sounds and bell icon appears | Current temperature (PV) has exceeded the set high alarm (HA) or fallen below the low alarm (LA) threshold. | Check the environmental conditions. Adjust HA/LA settings if necessary. The controller will disable all outputs in fault alarm mode to protect equipment. |
| Heating/Cooling device not activating | Incorrect temperature settings (TS, CD, HD); compressor delay protection (PT) active; device not properly plugged in; device malfunction. | Verify TS, CD, and HD settings. Wait for the PT delay to expire in cooling mode. Ensure devices are securely plugged into the correct outlets. Test heating/cooling devices independently. |
| Няправільныя паказанні тэмпературы | Sensor placement; temperature calibration (CA) offset. | Relocate the sensor to a more representative area. Use the CA parameter to calibrate the reading against a known accurate thermometer. |
7. Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| Нумар мадэлі | XT-STC1000Pro-01US |
| Марка | Ксетрон |
| тtage | 230V AC (Note: Product description mentions 230V, specifications mention 110V. User should verify their specific model's voltage requirements.) |
| Максімальны выхадны ток | 10А на разетку |
| Дыяпазон кантролю тэмпературы | -40 ℃ да 110 ℃ (-40 ℉ да 230 ℉) |
| Дакладнасць тэмпературы | ±1 ℃ / ±2 ℉ |
| Тып дысплея | OLED |
| Матэрыял | Flame-retardant ABS Plastic |
| Памеры прадукту (Д х Ш х У) | 20 х 15 х 6 см |
| Вага | 400 грамаў |
| Працоўная тэмпература | Up to 110 ℃ |
| Уключаныя кампаненты | 1x Temperature Controller |
8. Папярэджанні і меры засцярогі па тэхніцы бяспекі
- Электрычная нагрузка: Do not connect equipment with a total power consumption exceeding 10A (2400W at 240V) to each outlet. Overloading can cause damage to the controller and connected devices, and poses a fire hazard.
- тtage Сумяшчальнасць: Ensure the controller's voltage (230V) matches your local power supply.
- Ўздзеянне вады: While the probe is waterproof, the main controller unit is not designed for immersion. Avoid exposing the main unit to direct water spray or submersion.
- Цэласнасць датчыка: Always ensure the temperature sensor is fully and securely inserted. A short-circuited or damaged sensor will trigger a fault alarm and disable outputs for protection.
- Дзеці і хатнія жывёлы: Keep the device and its cables out of reach of children and pets to prevent accidental damage or injury.
- Вентыляцыя: Забяспечце дастатковую вентыляцыю вакол кантролера, каб прадухіліць перагрэў.
9. Падтрымка і кантактная інфармацыя
For any questions, technical assistance, or customer service inquiries regarding your Xetron STC-1000Pro Digital Temperature Controller, please contact Xetron customer support. We are committed to providing satisfactory customer service.
Калі ласка, звярніцеся да ўпакоўкі прадукту або да прадаўца webсайт для атрымання найбольш актуальнай кантактнай інфармацыі.