1. Прадукт скончыўсяview
The JIARUIXIN JR1958RX-2S is a 12V receiver control box designed as a replacement part for children's electric ride-on cars. This unit facilitates the remote control functionality of the vehicle, ensuring proper communication between the remote and the car's motor system. It operates using 2.4G Bluetooth technology for stable and reliable control.
Малюнак 1: Верх view of the JR1958RX-2S 12V Receiver Control Box, showing connection ports and product labeling.
2. Сумяшчальнасць
This JR1958RX-2S control box is specifically designed for certain children's electric ride-on cars. It is compatible with JR1958RX and JR1758RX versions. To ensure proper fit and function, it is crucial to verify that the appearance and model number of this replacement control box match your original, broken unit.
Image 2: Comparison of JR1958RX-2S and JR1758RX-2S receiver control boxes, illustrating their similar appearance and compatibility.
3. Настройка і ўстаноўка
- Падрыхтоўка: Before beginning, ensure the ride-on car is turned off and disconnected from any power source.
- Access the Control Box: Locate and open the compartment housing the existing control box in your electric ride-on car. This usually involves removing screws or clips.
- Verify Match: Carefully compare the appearance and model number of the new JR1958RX-2S control box with the old one. They must be identical for proper function.
- Адлучыце стары блок: Gently disconnect all wiring harnesses and connectors from the old control box. Note their positions if necessary.
- Усталяваць новы блок: Place the new JR1958RX-2S control box into the compartment. Connect all wiring harnesses and connectors to their corresponding ports on the new unit. Ensure all connections are secure.
- Бяспечны адсек: Close and secure the control box compartment.
4. Operating Instructions: Frequency Matching
After installing the new control box or replacing the battery in the remote control, you will need to perform a frequency matching procedure to link the remote control with the receiver.
- Уключэнне аўтамабіля: Turn on the electric ride-on car.
- Спалучэнне пульта дыстанцыйнага кіравання: Within a few seconds of turning on the car, press and hold the pairing button on your remote control (refer to your remote control's specific instructions for button location).
- Пацверджанне: The car's lights or indicators may flash, or you may hear a sound, indicating successful pairing. Release the button once pairing is confirmed.
- Праверка функцыянальнасці: Test all functions of the remote control (forward, backward, steering) to ensure proper operation.
5. Тэхнічнае абслугоўванне
- Захоўваць сухім: Protect the control box from moisture and water exposure to prevent damage to electronic components.
- Чысціня: Periodically inspect the control box area for dust or debris accumulation. Clean gently with a dry, soft cloth if necessary.
- Бяспечныя злучэнні: Пераканайцеся, што ўсе злучэнні правадоў надзейныя і не пакрытыя карозіяй.
6. Выпраўленне непаладак
- Car Not Responding to Remote:
- Пераканайцеся, што ў пульце дыстанцыйнага кіравання новыя батарэі.
- Perform the frequency matching procedure (Section 4) again.
- Check all wiring connections to the control box for looseness.
- Перыядычны кантроль:
- Check for interference from other 2.4G devices nearby.
- Ensure the remote control is within effective range.
- No Power to Car:
- Verify the car's main battery is charged and properly connected.
- Check the main power switch on the car.
- Inspect the control box and wiring for any visible damage.
7. Тэхнічныя характарыстыкі
- Нумар мадэлі: JR1958RX-2S
- тtage: 12 В пастаяннага току
- Метад кантролю: 2.4G Bluetooth
- Ток загрузкі: Макс. 30 А
- Частата: 2.407 ГГц - 2.473 ГГц
- Памеры прадукту: 3.2 х 2.6 х 1.6 цалі (8.1 х 6.6 х 4.1 см)
- Вага прадмета: 2.82 унцыі (80 грам)
8. Гарантыя і падтрымка
For warranty information or technical support regarding your JIARUIXIN JR1958RX-2S control box, please refer to the documentation provided with your original ride-on car or contact the manufacturer directly. Ensure you have your product model number and purchase details available when seeking support.