HMF 46126-11 Small Safe with Electronic Combination Lock

1. Уводзіны

This manual provides essential instructions for the proper installation, operation, and maintenance of your HMF 46126-11 Small Safe. Designed for securing cash, valuables, and documents, this safe features a robust steel construction and an electronic combination lock for reliable protection. Please read this manual thoroughly before using the safe to ensure optimal performance and security.

Image 1.1: The HMF 46126-11 small safe, featuring its electronic keypad and emergency lock. The keypad includes a low battery warning indicator.

2. Інфармацыя па бяспецы

• Do not store the emergency keys inside the safe. Keep them in a secure, separate location.
• Пазбягайце ўздзеяння экстрэмальных тэмператур або вільготнасці на сейф.
• Пераканайцеся, што сейф надзейна замацаваны, каб прадухіліць яго несанкцыянаванае зняцце.
• Change the factory default code immediately after initial setup.
• Do not use abrasive cleaners on the safe's surface.

3. Змесціва ўпакоўкі

Праверце, ці ўсе пералічаныя ніжэй прадметы ўваходзяць у вашу ўпакоўку:

• 1 x HMF 46126-11 Small Safe
• 2 х аварыйныя ключы
• 2 x Metal Anchors
• 2 х крапежныя шрубы
• 1 х Кіраўніцтва карыстальніка

4. Прадукт скончыўсяview

Малюнак 4.1: Інтэр'ер view of the safe, showing space for A5 documents and small valuables, along with integrated key hooks on the door.

Image 4.2: Close-up of the electronic keypad, featuring number buttons, a rotary knob for opening, and indicator lights.

5. Ўстаноўка

5.1 Выбар месца

Select a discreet and secure location for your safe. It can be mounted to a wall or floor. Ensure the surface is solid enough to support the safe's weight and resist tampэрынг.

5.2 Інструкцыі па мантажы

The safe features pre-drilled holes for easy installation. Use the provided metal anchors and fixing screws to secure the safe.

1. Размясціце сейф у патрэбным месцы.
2. Адзначце кропкі свідравання праз загадзя прасвідраваныя адтуліны на задняй або ніжняй частцы сейфа.
3. Drill holes into the wall or floor using an appropriate drill bit (not included).
4. Insert the metal anchors into the drilled holes.
5. Align the safe with the anchors and secure it using the fixing screws. Tighten firmly.

Image 5.1: The safe's pre-drilled holes for wall or floor mounting, along with the included fixing hardware.

Малюнак 5.2: ззаду view of the safe, highlighting the pre-drilled holes for secure installation.

6. Пачатковая налада

6.1 Opening the Safe for the First Time

Upon receiving your safe, it will be locked. Use one of the provided emergency keys to open it for the first time.

1. Знайдзіце аварыйную замочную свідравіну, якая звычайна схаваная за невялікай вечкам на панэлі клавіятуры.
2. Insert an emergency key and turn it clockwise.
3. While the key is turned, rotate the knob on the keypad counter-clockwise to open the safe door.

Image 6.1: Demonstrates inserting the emergency key into the hidden keyhole to unlock the safe.

6.2 Устаноўка батарэі

The electronic lock requires batteries (typically AA, not always included). The battery compartment is usually located on the inside of the safe door.

1. Open the safe door using the emergency key.
2. Знайдзіце вечка батарэйнага адсека на ўнутраным боку дзвярэй.
3. Remove the cover and insert the required batteries, ensuring correct polarity (+/-).
4. Замяніце крышку батарэйнага адсека.

6.3 Setting Your Personal Combination Code

It is crucial to set your personal code immediately after installing batteries. The code can be 3 to 8 digits long.

1. Адкрыўшы дзверцы сейфа, націсніце чырвоную кнопку скіду, размешчаную на ўнутраным баку дзверцаў, каля завесы. Вы пачуеце гукавы сігнал.
2. On the keypad, enter your desired 3 to 8 digit code.
3. Press the '#' button to confirm. You will hear a confirmation beep.
4. Test the new code with the door open before closing it. Enter your code, then rotate the knob counter-clockwise.

Image 6.2: A hand demonstrating the process of entering a personal access code on the electronic keypad.

7. Аперацыя

7.1 Адкрыццё сейфа з дапамогай кода

1. Enter your personal 3 to 8 digit code on the keypad.
2. Press the '#' button. The green light will illuminate, and you will hear a beep.
3. Within 5 seconds, rotate the knob counter-clockwise to open the door.

7.2 Зачыненне і замыканне сейфа

1. Зачыніце дзверы сейфа.
2. Rotate the knob clockwise to engage the locking bolts. The safe is now secured.

7.3 Emergency Opening

In case of forgotten code or dead batteries, you can use the emergency keys.

1. Locate the emergency keyhole (refer to Section 6.1).
2. Insert an emergency key and turn it clockwise.
3. While the key is turned, rotate the knob counter-clockwise to open the safe door.

8. Тэхнічнае абслугоўванне

8.1 Замена батарэі

When the 'LOW BATTERY WARNING' indicator lights up or the safe fails to open with the code, it's time to replace the batteries.

1. Open the safe using the emergency key (if batteries are completely dead).
2. Replace all batteries in the compartment (refer to Section 6.2).
3. Test the electronic lock with your code after replacement.

8.2 Ачыстка

Працярыце вонкавую паверхню сейфа мяккай губкайamp cloth. Do not use harsh chemicals or abrasive materials, as they can damage the finish or electronic components.

8.3 Key Care

Keep emergency keys in a safe, accessible location outside the safe. Avoid bending or damaging the keys.

9. Выпраўленне непаладак

10. Тэхнічныя характарыстыкі

Image 10.1: Visual representation of the safe's external dimensions (23x17x17 cm) and internal capacity, suitable for A5 documents.

11. Гарантыя і падтрымка

Your HMF safe is manufactured with quality and durability in mind. For specific warranty details, please refer to the documentation provided at the time of purchase or contact your retailer.

For technical support or inquiries, please contact HMF customer service through the official website or your point of purchase. Please have your model number (46126-11) ready when contacting support.