ThermoPro TP260B Indoor Outdoor Thermometer User Manual

Прадукт скончаныview

The ThermoPro TP260B is a professional-grade indoor/outdoor thermometer and hygrometer designed for accurate and reliable monitoring of temperature and humidity. Featuring a market-leading 1000ft/300m wireless range, it allows you to monitor conditions in multiple locations around your home or property. The main unit displays both indoor and outdoor readings, including trend arrows and 24-hour high/low records. Its easy-to-read backlit display and touch buttons ensure user-friendly operation. The remote sensor is weatherproof and cold-resistant, making it suitable for various outdoor environments.

Figure 1: ThermoPro TP260B Main Unit and Remote Sensor

Змест пакета

• 1 x Main Thermometer Unit
• 1 х дыстанцыйны датчык тэмпературы
• 4 x AAA Size Batteries (included)
• 1 х Кіраўніцтва карыстальніка

Key Components and Display

Малюнак 2: падрабязна view of the main unit's display and touch buttons.

The main unit features a large, clear LCD display with distinct sections for indoor and outdoor readings. Key indicators include:

• ВЫХОД: Вонкавая тэмпература і вільготнасць.
• У: Тэмпература і вільготнасць у памяшканні.
• CH1/2/3: Indicates the channel of the remote sensor being displayed.
• MAX / MIN: Displays the highest and lowest recorded temperature/humidity over the last 24 hours.
• Трэндавыя стрэлкі: Shows whether temperature/humidity is rising, falling, or remaining stable.
• Індыкатар разраду батарэі: Папярэджвае, калі батарэйкі патрабуюць замены.
• Кнопка °F/°C: Toggles between Fahrenheit and Celsius.
• CH/SYNC Button: Used for channel selection and sensor synchronization.
• Light Touch Button: Уключае падсветку дысплея для паляпшэння бачнасці пры слабым асвятленні.
• Кнопка MAX/MIN/CLEAR: Toggles between Max/Min readings and clears recorded data.

Настройка

1. Устаноўка батарэі

1. Асноўны блок: Адкрыйце батарэйны адсек на задняй панэлі асноўнага блока. Устаўце 2 батарэйкі тыпу AAA, сачыце за правільнай палярнасцю (+/-). Зачыніце адсек.
2. Дыстанцыйны датчык: Open the battery compartment on the back of the remote sensor. Insert 2 x AAA batteries, ensuring correct polarity (+/-). Close the compartment.

2. Сінхранізацыя

The main unit and remote sensor should automatically synchronize once batteries are installed. If synchronization fails or you are adding additional sensors, follow these steps:

• Place the main unit and remote sensor close to each other.
• Націсніце і ўтрымлівайце CH/SYNC button on the main unit for 3 seconds. The display will flash, indicating it is searching for the sensor.
• Націсніце СКІД button on the back of the remote sensor.
• The main unit should display the remote sensor's readings within a few minutes.

Заўвага: The ThermoPro TP260B supports up to 3 remote sensors (sold separately). To add more sensors, repeat the synchronization process for each additional sensor, selecting a different channel (CH1, CH2, or CH3) on the main unit using the CH/SYNC кнопка.

Figure 3: The main unit can connect with up to three remote sensors.

3. Варыянты размяшчэння

The main unit offers versatile placement options:

• Настольная падстаўка: Use the integrated fold-out stand for desktop or shelf placement.
• Насценны мацаванне: Выкарыстоўвайце адтуліну для падвешвання на задняй панэлі, каб прымацаваць яго да сцяны.
• Убудаваны магніт: Attach the unit to any metallic surface, such as a refrigerator.

For the remote sensor, choose a location that provides accurate readings and is within the 1000ft wireless range. Avoid direct sunlight or areas with extreme temperature fluctuations. The sensor is weatherproof, but placing it under an overhang or in a sheltered spot can prolong its lifespan.

Figure 4: Various placement options for the main unit.

Інструкцыя па эксплуатацыі

1. Пераключэнне адзінак вымярэння тэмпературы (°F/°C)

Націсніце °F/°C button on the front of the main unit to toggle between Fahrenheit and Celsius temperature displays.

2. Уключэнне падсветкі

Дакраніцеся да Святло button (light bulb icon) on the front of the main unit to activate the backlight for 15 seconds, improving readability in dark conditions.

Figure 5: The LCD screen features a backlight for easy reading.

3. Viewing and Clearing MAX/MIN Records

Націсніце MAX/MIN/CLEAR кнопку адзін раз view the maximum temperature and humidity recorded since the last reset. Press it again to view the minimum records. To clear the 24-hour high/low records, press and hold the MAX/MIN/CLEAR кнопку на працягу 3 секунд.

4. Monitoring Multiple Channels

If you have multiple remote sensors, press the CH/SYNC button repeatedly to cycle through the channels (CH1, CH2, CH3) and view the readings from each sensor. The main unit will automatically scroll through all active channels every few seconds.

Тэхнічнае абслугоўванне

1. Замена батарэі

When the low battery indicator appears on the display, replace the batteries in the respective unit (main unit or remote sensor) with new AAA batteries. Ensure correct polarity.

Важная заўвага: If you only replace the remote sensor battery, please press and hold the CH/SYNC button of the receiver for 3 seconds to re-register, or by reinstalling the battery of the receiver within 3 minutes and then they will automatically resynchronize the data.

2. Уборка і захоўванне

Ачысціце прыладу і датчык мяккай губкайamp cloth. Do not immerse in water or use abrasive cleaners. Store the device in a dry place away from extreme temperatures when not in use for extended periods.

Figure 6: The remote sensor is designed to withstand various weather conditions.

Ліквідацыю непаладак

• No readings on display or "---" shown:
  • Праверце, ці правільна ўсталяваныя батарэйкі з захаваннем палярнасці.
  • Заменіце старыя батарэі на новыя.
  • Ensure the main unit and sensor are within the 1000ft wireless range and free from major obstructions.
  • Perform a manual synchronization as described in the "Setup" section.
• Няправільныя паказанні:
  • Ensure the sensor is not placed in direct sunlight, near heat sources, or in areas with poor air circulation.
  • Allow the units to stabilize for at least 30 minutes after setup for accurate readings.
  • The 1000-ft range may be affected by obstructions in your home layout (including walls, router, trees, and bushes as well as building materials such as metal and glass). Try relocating the sensor or main unit.
• Дысплей цьмяны або мігоча:
  • Replace the batteries in the main unit.

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

ThermoPro products come with a warranty. For detailed warranty information, product registration, or technical support, please visit the official ThermoPro webсайт або звярніцеся да кантактнай інфармацыі, указанай на ўпакоўцы прадукту.

You can also download the full user manual in PDF format here: ThermoPro TP260B User Manual (PDF)