Xetron XT-LMG-10X-EU
Xetron HVAC Digital Manifold Gauge User Manual
Model: XT-LMG-10X-EU
1. Уводзіны
The Xetron LMG-10X Digital Manifold Gauge is an advanced tool designed for HVAC and refrigeration systems. It provides precise measurements for pressure, temperature, vacuum, and automatically calculates superheat and subcooling. This manual will guide you through the setup, operation, and maintenance of your device.

Figure 1: Xetron LMG-10X Digital Manifold Gauge with included accessories.
2. Інфармацыя па бяспецы
Always read and understand all safety warnings and instructions before using the device. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Перад пачаткам працы пераканайцеся, што ўсе злучэнні надзейныя.
- Не падвяргайце прыладу ўздзеянню экстрэмальных тэмператур або прамых сонечных прамянёў на працягу доўгага часу.
- Use only specified accessories and probes.
- Трымайце прыладу далей ад вады і іншых вадкасцей.
- Звяртайцеся да абслугоўвання толькі кваліфікаваным персаналам.
3. Змесціва ўпакоўкі
Праверце, ці ёсць у вашай упакоўцы ўсе пералічаныя ніжэй прадметы:
- 1 x Xetron Digital Manifold Gauge (LMG-10X)
- 2 х клamp Датчыкі тэмпературы
- 1 х футляр для пераноскі
- 1 х Кіраўніцтва карыстальніка (гэты дакумент)

Figure 2: What's in the box - Xetron Digital Manifold and Clamp Temperature Probes.
4. Настройка
4.1. Пачатковае ўключэнне
- Insert batteries into the compartment on the back of the unit (if not pre-installed).
- Націсніце і ўтрымлівайце кнопку харчавання (⏻), каб уключыць прыладу.
- The LCD screen will illuminate and display the initial measurement interface.
4.2. Connecting Probes and Hoses
Злучыце склamp temperature probes to the designated ports on the manifold. Ensure a secure connection. Refrigerant hoses (not included) can be connected to the 1/4" SAE threaded connectors at the bottom of the unit.

Figure 3: Connecting the Xetron LMG-10X to an HVAC system.
5. Інструкцыя па эксплуатацыі
5.1. Pressure and Temperature Measurement Mode
This mode displays real-time pressure and temperature readings, along with calculated saturation temperatures (VSAT, LSAT).

Figure 4: Interface for Pressure and Temperature Measurement Mode.
5.2. Superheat and Subcooling Measurement
The device automatically calculates superheat (SH) and subcooling (SC) values based on the selected refrigerant and measured parameters.

Figure 5: Display showing Superheat and Subcooling measurements.
5.3. Pressure Hold Test Mode
To enter Pressure Hold Test mode, briefly press the РЭЖЫМ кнопка, а затым ПРАЙГРАЦЬ/Паўза button from VAC mode. This mode allows you to monitor pressure changes over time.

Figure 6: Interface for Pressure Hold Test Mode.
5.4. Unit Settings and Auto Shutdown
The device allows for conversion of various measurement units and configuration of automatic shutdown settings.

Figure 7: Temperature Unit Setting.

Figure 8: Pressure Unit Setting.

Figure 9: Auto Shutdown OFF.

Figure 10: Auto Shutdown ON.
6. Built-in Refrigerant Database
The Xetron LMG-10X comes with a comprehensive database of 88 types of refrigerants, allowing for accurate calculations and measurements across various systems.

Figure 11: Partial list of supported refrigerants.
7. Тэхнічнае абслугоўванне
7.1. Уборка
Працярыце прыладу мяккай, damp cloth. Do not use abrasive cleaners or solvents. Ensure the device is dry before storage.
7.2. Захоўванне
Store the device in its carrying case in a cool, dry place when not in use. Remove batteries if storing for extended periods to prevent leakage.
8. Выпраўленне непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Прылада не ўключаецца. | Low or dead batteries; incorrectly inserted batteries. | Замяніце батарэйкі; пераканайцеся ў правільнай палярнасці. |
| Няправільныя паказанні. | Probes not properly connected; incorrect refrigerant selected. | Check probe connections; verify selected refrigerant matches system. |
| Дысплей цьмяны або мігціць. | Нізкі зарад батарэі. | Заменіце батарэі. |
9. Тэхнічныя характарыстыкі
- мадэль: XT-LMG-10X-EU
- Памеры (Д х Ш х У): 37 х 30 х 10 см (14.57 х 11.81 х 3.94 цалі)
- Вага прадмета: 1.2 кг (2.65 фунтаў)
- матэрыял: Акрыланітрылбутадыенстырол (АБС)
- Refrigerant Database: 88 віды
- Функцыі: Pressure & Temperature Measurement, Vacuum Measurement, Pressure Hold Test, Automatic Shutdown, Temperature Compensation
10. Гарантыя і падтрымка
Xetron offers a one-year warranty for the LMG-10X Digital Manifold Gauge. For any questions or support needs, please contact Xetron customer service. We are committed to providing lifetime customer service.
For further assistance, please visit the official Xetron webсайт або звярніцеся да іх каналаў падтрымкі.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.