CIARRA CAS9201A 90 cm Class A Wall-Mounted Extractor Hood

1. Важная інфармацыя па бяспецы

Please read this manual carefully before installation and use. Keep it for future reference. Incorrect installation or use may cause electric shock, fire, or injury.

• Электрабяспека: Пераканайцеся, што крыніца харчавання адпавядае аб'ёмуtage specified on the rating plate. The appliance must be properly grounded. Do not use extension cords or multiple adapters.
• Ўстаноўка: Installation must be carried out by a qualified person in accordance with all local regulations. Maintain the minimum distance between the hob and the lower part of the hood as specified in the installation instructions.
• Вентыляцыя: Забяспечце дастатковую вентыляцыю ў памяшканні, калі выцяжка выкарыстоўваецца адначасова з газавымі або іншымі прыборамі, якія працуюць на паліве.
• Уборка: Regularly clean the appliance and its filters to prevent grease accumulation, which can pose a fire risk.
• Дзеці і ўразлівыя асобы: Гэтым прыборам могуць карыстацца дзеці ва ўзросце ад 8 гадоў і асобы з паніжанымі фізічнымі, сэнсарнымі або разумовымі здольнасцямі або з адсутнасцю вопыту і ведаў, калі яны знаходзяцца пад наглядам або атрымалі інструкцыі адносна бяспечнага выкарыстання прыбора і разумеюць звязаныя з гэтым небяспекі . Дзеці не павінны гуляць з прыладай. Чыстка і абслугоўванне карыстальнікам не павінны праводзіцца дзецьмі без нагляду.

2. Прадукт скончыўсяview

The CIARRA CAS9201A is a 90 cm wall-mounted extractor hood designed for efficient kitchen ventilation. It features a powerful 370 m³/h suction capacity and three adjustable speed levels to effectively remove cooking fumes and odors. The hood is equipped with durable aluminum grease filters and energy-efficient LED lighting.

Figure 2.1: CIARRA CAS9201A 90cm extractor hood installed in a contemporary kitchen.

Асноўныя характарыстыкі:

• Клас энергаэфектыўнасці А: Up to 40% energy saving compared to Class C models.
• Высокая магутнасць ўсмоктвання: 370 m³/h for effective air purification.
• Тры ўзроўні хуткасці: Adjustable fan speeds for various cooking needs.
• Два рэжымы працы: Can be configured for ducted extraction or recirculation with optional carbon filters.
• Aluminum Grease Filters: Three 26 cm aluminum filters, washable for easy maintenance.
• Святлодыёднае асвятленне: Integrated LED light for illuminating the cooking area.
• Сэнсарныя элементы кіравання: Інтуітыўна зразумелая панэль кіравання для лёгкага кіравання.

Figure 2.2: Energy efficiency comparison, highlighting 40% savings for Class A.

3. Ўстаноўка

The CIARRA CAS9201A extractor hood is designed for wall mounting. It can operate in two modes: ducted extraction or recirculation. Ensure all necessary accessories are present before beginning installation.

3.1 Змест пакета:

• 1 x Extractor Hood Unit
• 1 x Bag of Screws and Wall Plugs
• 2 x Aluminum Grease Filters (pre-installed)
• 2 x Chimney Extension Sections (40+40 cm)
• 1 x Exhaust Duct (1.5 m)
• 1 x UK Standard Plug (may vary by region)
• 1 х Інструкцыя па эксплуатацыі
• 1 x Pair of Carbon Filters (for recirculation mode, included)

3.2 Этапы ўстаноўкі:

1. Падрыхтоўка: Unpack the hood and check for any damage. Ensure you have all components listed above.
2. Мантажная вышыня: Determine the appropriate mounting height above your hob. Refer to local building codes and the minimum distance specified in the full manual.
3. Разметка і свідраванне: Use the provided template (if available) or measure carefully to mark drilling points on the wall for the hood and chimney bracket. Drill holes and insert wall plugs.
4. Мантаж выцяжкі: Secure the hood to the wall using the provided screws. Ensure it is level and firmly attached.
5. Ducting (Ducted Mode): Connect the exhaust duct to the hood's outlet and route it to an external vent. Ensure the duct is as straight and short as possible to maximize efficiency.
6. Recirculation (Filter Mode): If using recirculation, install the carbon filters onto the motor as per the instructions in the full manual. The exhaust duct is not used in this mode, but the chimney sections are still installed for aesthetic purposes.
7. Мантаж коміна: Attach the chimney extension sections, ensuring they fit securely and cover the ducting or motor assembly.
8. Электрычнае падключэнне: Connect the hood to a suitable power outlet.

Figure 3.1: Dimensional drawing of the CAS9201A hood (Unit: mm).

Figure 3.2: Illustration of ducted (left) and recirculation (right) modes.

4. Інструкцыя па эксплуатацыі

The CIARRA CAS9201A extractor hood features intuitive touch controls for easy operation of its functions.

4.1 Панэль кіравання:

The control panel is located on the front underside of the hood. It typically includes buttons for power, fan speed adjustment, and lighting.

Figure 4.1: Close-up of the control panel with power, speed, and light buttons.

4.2 функцый:

• Уключэнне/выключэнне харчавання: Націсніце кнопку харчавання, каб уключыць або выключыць выцяжку.
• Рэгуляванне хуткасці вентылятара: Select from three speed levels (low, medium, high) to match your cooking intensity. Use lower speeds for simmering and higher speeds for frying or grilling.
• Уключэнне/выключэнне святла: Press the light button to turn the LED cooking area illumination on or off.

For optimal performance, turn on the hood a few minutes before you start cooking and leave it running for a few minutes after you finish to ensure all fumes are cleared.

5. Тэхнічнае абслугоўванне

Regular maintenance ensures the longevity and efficient operation of your CIARRA extractor hood.

5.1 Ачыстка алюмініевых тлушчавых фільтраў:

The aluminum grease filters should be cleaned regularly, typically every 2-4 weeks depending on usage, to prevent grease buildup and maintain suction efficiency. They are washable and can be cleaned by hand or in a dishwasher.

1. Выдаленне: Carefully unlatch and remove the aluminum grease filters from the underside of the hood.
2. Уборка: Wash the filters in warm soapy water or place them in a dishwasher on a gentle cycle. Avoid using abrasive cleaners.
3. Сушка і паўторная ўстаноўка: Allow the filters to dry completely before reinserting them into the hood.

Малюнак 5.1: Буйны план view of the aluminum grease filter.

5.2 Replacing Carbon Filters (Recirculation Mode Only):

If your hood is operating in recirculation mode, the carbon filters (included) need to be replaced periodically, typically every 3-6 months, as they cannot be washed. Refer to the full manual for specific replacement instructions.

5.3 Cleaning the Hood Surface:

Clean the exterior surfaces of the hood with a soft cloth and a mild, non-abrasive cleaning agent. Do not use harsh chemicals or abrasive pads, as these can damage the stainless steel finish.

Figure 5.2: Demonstrating cleaning the hood surface.

6. Выпраўленне непаладак

This section provides solutions to common issues you might encounter with your extractor hood. If the problem persists, contact customer support.

7. Тэхнічныя характарыстыкі

Figure 7.1: Energy label for the CIARRA extractor hood.

8. Гарантыя і падтрымка

Your CIARRA CAS9201A extractor hood comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions, including the warranty period and coverage details.

For technical assistance, spare parts, or any other inquiries, please contact CIARRA customer support. Contact information can typically be found on the manufacturer's webна сайце або ў дакументацыі, якая пастаўляецца з вашым прадуктам.

When contacting support, please have your model number (CAS9201A) and purchase date ready.