Youmile LM393 H2010 Correlation Photoelectric Sensor Instruction Manual

Уводзіны

This manual provides detailed instructions for the Youmile LM393 H2010 Correlation Photoelectric Sensor module. This sensor is designed for applications requiring detection of objects passing through a slot, such as workpiece counting and motor speed measurement. It operates by detecting interruptions in an infrared beam.

Інфармацыя па бяспецы

• Пераканайцеся, што аб'ём блока харчаванняtage is within the specified range (DC 5V) to prevent damage to the module.
• Avoid exposing the module to extreme temperatures, humidity, or corrosive environments.
• Handle the module with care to prevent physical damage to components or pins.
• Заўсёды адключайце харчаванне перад тым, як рабіць або змяняць падключэнні.

Змест пакета

Праверце, ці ёсць усе прадметы ў вашай упакоўцы:

• 5 x LM393 H2010 Correlation Photoelectric Sensor Modules
• 5 x Encoders (Discs)
• 1 x 15-pin Male and Female DuPont Cable

Figure 1: Sensor module and encoder disc included in the package. The sensor is a U-shaped component with three pins (GND, OUT, VCC), and the encoder is a circular disc with slots.

Прадукт скончаныview і Асаблівасці

The Youmile LM393 H2010 sensor module is a slot-type optocoupler designed for precise detection. It integrates an LM393 comparator chip for stable signal output.

• Signal Output Indication: The module includes an LED indicator for visual feedback on the output status.
• Single-Channel Signal Output: Provides a single digital output signal.
• Output Logic: Outputs a high level (LED light off) when an obstruction is present in the slot, and a low level (LED light on) when there is no obstruction.
• Fixed Sensitivity: The sensitivity of the sensor is not adjustable.
• прыкладанні: Suitable for workpiece counting and motor speed measurement using an encoder disc.
• Circuit Board Output Switch: Refers to the digital output capability of the module.

Figure 2: Key features of the sensor module, highlighting its functional aspects.

Тэхнічныя характарыстыкі

Figure 3: Physical dimensions of the sensor module. The length is 23mm (0.90in), width is 20mm (0.78in), and slot width is 10mm (0.39in).

Figure 4: Internal circuit diagram of the sensor module, illustrating the components and their connections, including power, output, and indication LED.

Setup and Wiring

Follow these steps to connect your LM393 H2010 sensor module:

1. Вызначыць піны: The module has three pins:
   • VCC: Power supply input (DC 5V).
   • GND: Зазямленне.
   • ВЫХОД: Digital signal output.
2. Падключыце харчаванне: Connect the VCC pin to a stable 5V DC power source and the GND pin to the ground of your system (e.g., Arduino, microcontroller).
3. Падключэнне выхаду: Connect the OUT pin to a digital input pin on your microcontroller. This pin will provide the detection signal.
4. Integration with Encoder (for speed measurement): If using for motor speed measurement, mount the encoder disc onto the motor shaft. Position the sensor module so that the encoder disc passes through the sensor's slot. Ensure the disc moves freely without obstruction from the sensor housing.

Малюнак 5: Выпample wiring diagram for motor speed measurement using the LM393 sensor with an Arduino UNO and an LCD display. The sensor detects rotations of the encoder wheel attached to the motor.

Інструкцыя па эксплуатацыі

Once properly connected, the sensor operates by detecting the presence or absence of an object within its 10mm slot.

• No Obstruction: When the sensor's infrared beam is unobstructed (nothing is in the slot), the output pin (OUT) will be LOW, and the onboard LED indicator will be ON.
• Obstruction Detected: When an object (e.g., an encoder disc tooth, a workpiece) passes through the slot and breaks the infrared beam, the output pin (OUT) will go HIGH, and the onboard LED indicator will turn OFF.

Your microcontroller can read these HIGH/LOW transitions on the OUT pin to count events (like workpiece passes) or calculate speed (by measuring the frequency of transitions from an encoder disc).

Прыкладанні

• Workpiece Counting: Integrate the sensor into an assembly line to count items as they pass through the slot.
• Motor Speed Measurement: Attach an encoder disc to a motor shaft. The sensor detects the slots on the disc as it rotates, allowing for calculation of RPM.
• Position Detection: Can be used to detect the presence or absence of a component at a specific point.

Тэхнічнае абслугоўванне

• Keep the sensor's slot clean and free from dust or debris, which could interfere with the infrared beam.
• Перыядычна правярайце ўсе злучэнні правадоў, каб пераканацца ў іх надзейнасці.
• Store the module in a dry, non-corrosive environment when not in use.

Ліквідацыю непаладак

Гарантыя і падтрымка

Specific warranty information for this product is not provided in the available documentation. For technical support or inquiries regarding your Youmile LM393 H2010 sensor module, please refer to the retailer or manufacturer's official support channels.