Edifier R19BT

Edifier R19BT 2.0 USB Powered Bluetooth Computer Speaker System

Кіраўніцтва карыстальніка

1. Уводзіны

Дзякуй за пакупкуasing the Edifier R19BT 2.0 USB Powered Bluetooth Computer Speaker System. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your speakers. Please read this manual thoroughly before use and retain it for future reference.

2. Змесціва ўпакоўкі

Калі ласка, праверце змесціва скрынкі, каб пераканацца ў наяўнасці ўсіх прадметаў:

  • Edifier R19BT Speakers (Right and Left)
  • Кіраўніцтва карыстальніка
  • Аўдыёкабель 3.5 мм

3. Прадукт скончыўсяview

The Edifier R19BT system consists of two speakers. The right speaker houses the main controls and connections.

Edifier R19BT Speakers with controls

Выява: спераду view of the Edifier R19BT speakers, showing the volume/power knob, headphone jack, and input selector button on the right speaker.

Right Speaker Controls and Ports:

  • Ручка гучнасці/магутнасці: Rotate to adjust volume. Press and hold to power on/off.
  • Раз'ём для навушнікаў: Выхад 3.5 мм для навушнікаў.
  • Input Selector Button: Press to cycle through USB, AUX, and Bluetooth input modes.
  • Індыкатар харчавання: LED light indicating power status and current input mode.

Rear Panel Connections (Right Speaker):

  • Кабель USB-A: Permanently attached for power and USB audio input.
  • Уваход AUX 3.5 мм: Для падлучэння знешніх аўдыёпрылад праз аўдыёкабель 3.5 мм.
  • Выхад на дынамік: Падключаецца да левага дынаміка.

4. Настройка

Follow these steps for initial setup of your Edifier R19BT speakers:

  1. пазіцыянаванне: Place the right speaker on the right side of your listening area and the left speaker on the left side. Ensure they are on a stable, flat surface.
  2. Падключэнне дынамікаў: Connect the cable from the right speaker's output to the input on the left speaker.
  3. Падключэнне сілкавання: Plug the attached USB-A cable from the right speaker into a USB port on your computer, laptop, or a compatible USB power adapter (5V/1A minimum, not included).
  4. Уключэнне: Press and hold the Volume/Power knob on the right speaker for approximately 2 seconds to power on the system. The power indicator LED will light up.
USB-powered speaker connected to a laptop

Image: A close-up of the USB cable connecting the speaker to a laptop, illustrating the plug-and-play USB power and audio feature.

5. Інструкцыя па эксплуатацыі

Уключэнне/выключэнне харчавання:

  • To power on, press and hold the Volume/Power knob for 2 seconds.
  • To power off, press and hold the Volume/Power knob for 2 seconds.

Рэгулятар гучнасці:

  • Rotate the Volume/Power knob clockwise to increase volume.
  • Rotate the Volume/Power knob counter-clockwise to decrease volume.

Выбар уводу:

Press the Input Selector button on the right speaker to cycle through the available input modes:

  • Рэжым USB: For audio playback from a computer via USB.
  • AUX рэжым: For audio playback from devices connected via the 3.5mm AUX input.
  • Рэжым Bluetooth: For wireless audio playback from Bluetooth-enabled devices.

Выкарыстанне навушнікаў:

Plug your headphones into the 3.5mm headphone jack on the right speaker. The speaker output will automatically mute when headphones are connected.

Edifier R19BT speakers with easy controls

Image: The right Edifier R19BT speaker highlighting the large 25mm knob for power on/off and volume control.

6. Злучэнне Bluetooth

The Edifier R19BT speakers feature Bluetooth 5.3 for wireless audio streaming.

Bluetooth 5.3 fast connection stable transmission

Image: The Edifier R19BT speakers with text indicating Bluetooth 5.3 for fast connection and stable transmission.

  1. Выберыце рэжым Bluetooth: Press the Input Selector button on the right speaker until the power indicator LED shows the Bluetooth mode (usually a blue light). The speaker will enter pairing mode, and the LED will flash rapidly.
  2. Уключыце Bluetooth на прыладзе: On your smartphone, tablet, or other Bluetooth-enabled device, go to the Bluetooth settings and enable Bluetooth.
  3. Спалучэнне: In the list of available devices, select "EDIFIER R19BT". Once connected, the power indicator LED on the speaker will glow steadily.
  4. Прайграванне: You can now play audio wirelessly from your device through the speakers.

Заўвага: If prompted for a password, enter "0000". The speakers will automatically attempt to reconnect to the last paired device when powered on and in Bluetooth mode.

Схема мікрасхемы Bluetooth 5.3

Image: A stylized diagram of a microchip labeled 'Bluetooth 5.3', representing the advanced wireless technology integrated into the speakers.

7. Wired Connection (USB/Aux)

Аўдыё ўваход USB:

The R19BT speakers can function as a USB sound card for your computer.

  1. Падключыце USB: Ensure the attached USB-A cable from the right speaker is connected to a USB port on your computer (PC or Mac).
  2. Выберыце рэжым USB: Press the Input Selector button on the right speaker until the power indicator LED shows the USB mode (usually a white light).
  3. Select as Output Device: On your computer, select "Edifier R19BT" as the audio output device in your sound settings.
USB падключэнне да ноўтбука

Image: A close-up of a USB cable being plugged into a laptop, demonstrating the direct USB audio and power connection.

Уваход AUX 3.5 мм:

Connect external audio sources like MP3 players, smartphones, or other devices using the 3.5mm AUX input.

  1. Падключыце кабель AUX: Connect one end of the included 3.5mm audio cable to the AUX input port on the rear of the right speaker. Connect the other end to the audio output jack of your external device.
  2. Выберыце рэжым AUX: Press the Input Selector button on the right speaker until the power indicator LED shows the AUX mode (usually a green light).
  3. Прайграванне: Прайгравайце аўдыё з падлучанай прылады.

8. Тэхнічнае абслугоўванне

Proper maintenance ensures the longevity and performance of your speakers:

  • Уборка: Выкарыстоўвайце мяккую сухую тканіну для чысткі паверхняў дынамікаў. Не выкарыстоўвайце вадкія ачышчальнікі або абразіўныя матэрыялы.
  • Асяроддзе: Avoid exposing the speakers to direct sunlight, high humidity, dust, or extreme temperatures.
  • Вентыляцыя: Забяспечце дастатковую цыркуляцыю паветра вакол дынамікаў, каб прадухіліць перагрэў.
  • Апрацоўка: Асцярожна звяртайцеся з дынамікамі. Пазбягайце іх падзення і моцных удараў.

9. Выпраўленне непаладак

If you encounter issues with your Edifier R19BT speakers, please refer to the following troubleshooting guide:

праблемаМагчымая прычынаРашэнне
Няма гуку
  • Дынамікі не ўключаны.
  • Выбраны няправільны рэжым уводу.
  • Занадта нізкая гучнасць.
  • Аўдыёкабель падключаны няправільна.
  • Bluetooth не спалучаны або адключаны.
  • Press and hold the Volume/Power knob to power on.
  • Press the Input Selector button to choose the correct input (USB, AUX, or Bluetooth).
  • Rotate the Volume/Power knob clockwise to increase volume.
  • Пераканайцеся, што ўсе кабелі надзейна падключаны.
  • Re-pair Bluetooth device (see Section 6).
Збой злучэння Bluetooth
  • Speakers not in Bluetooth pairing mode.
  • Прылада занадта далёка ад дынамікаў.
  • Перашкоды ад іншых прылад.
  • Ensure speakers are in Bluetooth mode and the LED is flashing.
  • Перамясціце прыладу бліжэй да дынамікаў (да 10 метраў).
  • Выключыце іншыя прылады Bluetooth паблізу.
  • Паспрабуйце адлучыць прыладу і зноў падлучыць яе.
Скажоны гук
  • Volume too high (either on speakers or source device).
  • Дрэнная якасць крыніцы гуку.
  • Слабае злучэнне кабеля.
  • Reduce volume on both speakers and source device.
  • Паспрабуйце іншую крыніцу гуку.
  • Праверце ўсе кабельныя злучэнні.
Speakers not recognized by computer via USB
  • Выбраны няправільны рэжым уводу.
  • Computer audio settings not configured.
  • Ensure speakers are in USB mode.
  • Check your computer's sound settings and select "Edifier R19BT" as the output device.

10. Тэхнічныя характарыстыкі

Technical specifications for the Edifier R19BT speakers:

Edifier R19BT Specifications

Image: A graphic displaying key specifications of the Edifier R19BT speakers, including distortion limit, frequency response, noise level, and input voltage.

  • Назва мадэлі: R19BT
  • Тып дынаміка: Кніжная паліца
  • Тэхналогія падключэння: Дапаможны, Bluetooth 5.3, USB
  • Рэжым вываду гуку: Стэрэа (2.0)
  • Максімальная выхадная магутнасць дынаміка: 6 Watts (2W+2W distortion limit output power)
  • АЧХ: 80 Гц - 19 кГц
  • Каэфіцыент сігнал-шум: ≥25 dB(A)
  • Уваходны кнtage: 5 Volts (5V⎓1A)
  • Памер драйвера: 2.75 Inches (Full-range unit)
  • Памеры прадукту: 5.12" Г x 3.35" Ш x 6.88" У
  • Вага прадмета: 2.98 фунта
  • матэрыял: Plastic (with MDF wood case)
  • колер: Чорны

11. Гарантыя і падтрымка

The Edifier R19BT speakers come with a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included in your package or visit the official Edifier webсайт.

For technical support, troubleshooting assistance, or service inquiries, please contact Edifier customer support through their official channels. You can typically find contact information on the Edifier webсайце або ва ўпакоўцы прадукту.

вытворца: Эдыфікатар

Webсайт: www.edifier.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.