Dasqua 1804-1055 2-in-1 Laser Tape Measure User Manual

1. Уводзіны

This manual provides comprehensive instructions for the safe and effective use of your Dasqua 1804-1055 2-in-1 Laser Tape Measure. This device combines a traditional 5-meter tape measure with a 30-meter laser distance meter, featuring an OLED display for clear readings and USB charging capability. Please read this manual thoroughly before operating the device and retain it for future reference.

2. Інфармацыя па бяспецы

ПАПЯРЭДЖАННЕ: This product contains a Class 2 laser. Improper use can result in hazardous radiation exposure. Always adhere to the following safety guidelines:

• Не глядзіце прама на лазерны прамень.
• Не накіроўвайце лазерны прамень на людзей і жывёл.
• Avoid pointing the laser beam at reflective surfaces, as reflected beams can also be hazardous.
• Do not disassemble or modify the device. Unauthorized modifications can lead to laser radiation exposure.
• Захоўвайце прыладу ў месцах, недаступных дзецям.
• Выкарыстоўвайце толькі так, як апісана ў гэтай інструкцыі.
• Do not operate the device in explosive atmospheres or near flammable liquids or gases.

3. Прадукт скончыўсяview

3.1 Кампаненты і элементы кіравання

Familiarize yourself with the main components and control buttons of your Dasqua 2-in-1 Laser Tape Measure.

Image: Diagram showing the Dasqua 1804-1055 device with labels for the OLED display, laser emission point, USB charging port, tape measure, lock button, and control buttons.

• OLED -дысплей: Shows measurements, battery status, and operating modes.
• Рулетка: Traditional retractable steel tape for short-distance measurements (5m).
• Laser Emission Point: Where the laser beam exits the device.
• Порт для зарадкі USB: Для падзарадкі ўнутранай батарэі.
• Кнопка блакіроўкі: Secures the tape measure in position.

3.2 кнопкі кіравання

Выява: Крупны план view of the control panel on the Dasqua 1804-1055, showing the FUNC/UNITS, +/-, DIST, and CLEAR/OFF buttons.

• FUNC/UNITS: Press to cycle through measurement functions (e.g., single, continuous) or to change measurement units (meters, feet, inches).
• +/-: Used for adding or subtracting measurements. Also used to set the measurement reference point (front or rear of the device).
• DIST: Activates the laser for measurement. Press once to turn on the laser, press again to take a measurement.
• CLEAR/OFF: Press once to clear the current measurement. Press and hold to power off the device.

4. Настройка

4.1 Зарадка прылады

The Dasqua 1804-1055 is equipped with a built-in Li-ion 3.7V rechargeable battery. Before first use, ensure the device is fully charged.

Выява: Збоку view of the Dasqua 1804-1055 showing the micro-USB charging port.

1. Locate the USB charging port on the side of the device.
2. Connect the provided USB cable to the device and to a standard USB power adapter (not included) or a computer USB port.
3. The OLED display will indicate charging status.
4. Пасля поўнай зарадкі адключыце USB-кабель.

A full charge provides approximately 2000 measurements.

4.2 Уключэнне/выключэнне

• Каб уключыць: Націсніце DIST кнопку або АЧЫСТЫЦЬ/ВЫКЛ кнопка.
• Каб выключыць: Націсніце і ўтрымлівайце АЧЫСТЫЦЬ/ВЫКЛ button for a few seconds. The device will also automatically power off after 90 seconds of inactivity to conserve battery. The laser itself turns off after 30 seconds of inactivity.

5. Інструкцыя па эксплуатацыі

5.1 Using the Tape Measure

The integrated 5-meter tape measure functions like a standard tape measure.

Выява: Крупны план view of the 2.5cm wide tape measure extending from the Dasqua 1804-1055 device, showing metric markings.

1. Pull the tape blade out to the desired length.
2. To lock the tape in place, slide the lock button forward.
3. To retract the tape, slide the lock button backward and gently guide the tape back into the housing.

5.2 Using the Laser Measure

The laser measure provides quick and accurate digital distance measurements up to 30 meters.

Image: The Dasqua 1804-1055 device with a visible red laser beam extending from its front, indicating active laser measurement.

Адзінае вымярэнне адлегласці

1. Уключыце прыладу.
2. Point the laser emission point towards the target.
3. Націсніце DIST button once to activate the laser. A red laser dot will appear on the target.
4. Націсніце DIST button again to take the measurement. The distance will be displayed on the OLED screen.

Бесперапыннае вымярэнне (адсочванне)

1. Уключыце прыладу.
2. Націсніце FUNC/UNITS button until the continuous measurement icon (often a moving line or similar) appears on the display.
3. Націсніце DIST button once to start continuous measurement. The display will update in real-time as you move the device.
4. Націсніце DIST зноў націсніце кнопку, каб спыніць бесперапыннае вымярэнне і захаваць апошняе паказанне.

Змена адзінак вымярэння

To switch between meters (m), feet (ft), and inches (in):

• Націсніце FUNC/UNITS некалькі разоў кнопку, пакуль не адлюструецца патрэбная адзінка вымярэння.

Ўстаноўка апорнай кропкі вымярэння

The device can measure from its front edge or its rear edge. This is typically indicated by an icon on the display.

• Націсніце +/- button to toggle between front-edge and rear-edge measurement reference.

Addition and Subtraction of Measurements

The device supports basic arithmetic operations for measurements.

1. Take the first measurement using the DIST кнопка.
2. Націсніце +/- button once for addition (+) or twice for subtraction (-). The corresponding symbol will appear on the display.
3. Take the second measurement. The result of the operation will be displayed.
4. To clear the calculation, press АЧЫСТЫЦЬ/ВЫКЛ.

6. Тэхнічнае абслугоўванне

• Уборка: Выкарыстоўвайце мяккі, damp cloth to clean the device. Do not use abrasive cleaners, solvents, or immerse the device in water.
• захоўванне: Захоўвайце прыладу ў прахалодным, сухім месцы, удалечыні ад прамых сонечных прамянёў і экстрэмальных тэмператур.
• акумулятар: Рэгулярна зараджайце акумулятар, нават калі прылада рэдка выкарыстоўваецца, каб падтрымліваць яго працаздольнасць.
• Лазерная лінза: Keep the laser emission and reception lenses clean for accurate measurements. Use a soft cloth, similar to cleaning camera lenses.

7. Выпраўленне непаладак

8. Тэхнічныя характарыстыкі

Detailed technical specifications for the Dasqua 1804-1055 2-in-1 Laser Tape Measure.

Image: Detailed diagram of the Dasqua 1804-1055 with a list of technical specifications including measurement range, accuracy, laser class, operating conditions, and battery life.

9. Гарантыя і падтрымка

Dasqua products are manufactured under strict quality control. This product is inspected and approved for sale by Dasqua quality control centers.

Image: The Dasqua 1804-1055 device alongside a "Warranty Letter" and an instruction manual, indicating product quality assurance.

Dasqua takes responsibility for the quality of the product, providing a 1-year warranty against defects. Parts found to be defective may be repaired or replaced at Dasqua's sole discretion. This warranty does not apply to any product which has been subject to misuse, abuse, improper application, or which has been altered or repaired by unauthorized personnel.

For warranty claims or technical support, please contact your authorized Dasqua dealer or visit the official Dasqua webсайт для кантактнай інфармацыі.