SUNLU SUNLU T3 3D Printer (Terminator 3)
SUNLU T3 3D Printer User Manual
Model: SUNLU T3 (Terminator 3)
1. Уводзіны
This manual provides detailed instructions for the safe and efficient operation, setup, maintenance, and troubleshooting of your SUNLU T3 3D Printer. Please read this manual thoroughly before using the printer to ensure optimal performance and longevity.
Image: The SUNLU T3 3D Printer, showcasinяго дызайн і якampле друк.
2. Інструкцыі па тэхніцы бяспекі
Заўсёды выконвайце наступныя меры бяспекі:
- Трымайце прынтар далей ад лёгкаўзгаральных матэрыялаў і крыніц цяпла.
- Забяспечце належную вентыляцыю падчас працы.
- Do not touch the hot nozzle or heated bed during operation or immediately after printing.
- Заўсёды адключайце электраэнергію перад выкананнем тэхнічнага абслугоўвання або чысткі.
- Захоўваць у месцах, недаступных дзецям і хатнім жывёлам.
- Праверце блок харчавання voltage switch is set correctly for your region (115V or 230V) before plugging in the device. This switch is typically located near the power input.
3. Налада і зборка
3.1 Распакаванне і праверка
Carefully remove all components from the packaging. Inspect for any visible damage during transit. Refer to the packing list to ensure all parts are present.
Image: A visual representation of the SUNLU T3 3D Printer's packing list, including the main unit, accessories, and tools.
3.2 Этапы зборкі
The SUNLU T3 3D Printer is designed for easy assembly, typically completed in three main steps:
- Attach the gantry to the base.
- Mount the power supply unit/control box.
- Усталюйце трымальнік шпулькі.
Пераканайцеся, што ўсе злучэнні надзейныя, а кабелі пракладзены правільна.
Выява: Выбухнула view illustrating the simple three-step assembly of the printer.
3.3 Initial Leveling
The T3 printer features 16-point automatic leveling. This function assists in achieving an even print surface. It is recommended to perform auto-leveling before your first print and periodically thereafter.
Image: The 16-point auto-leveling system in action, ensuring a precise print surface.
4. Інструкцыя па эксплуатацыі
4.1 Загрузка ніткі
Insert the filament into the extruder mechanism. The T3 features a double gear metal extruder for stable filament output. Ensure the filament feeds smoothly without kinks.
Image: The metal double gear extruder, designed for consistent filament feeding.
4.2 Працэс друку
Загрузіце сваю 3D-мадэль file onto the printer via the provided TF card. Select the desired file from the printer's interface. The T3 supports high-speed printing up to 250mm/s, significantly reducing print times.
Image: A visual comparison demonstrating the speed advantage of 250mm/s printing.
4.3 Разумныя функцыі
- Filament Clog Detection: The printer will suspend operation and return to the origin if a clog is detected. Users can then clear the clog and resume printing.
- Filament Break Detection: The T3 detects abnormal filament feeding, such as run-out or breakage, and pauses printing to prevent print failure.
- Power Off Resume Printing: У выпадку ўлады унtage, the printer's memory function allows it to resume printing from where it left off once power is restored.
- Magnetic Build Plate: The flexible magnetic build surface allows for easy removal of finished 3D models without deformation. It also features ultra-fast heating.
Image: Flowchart demonstrating how the printer detects and handles filament clogs.
Image: Visual explanation of the power-off resume and filament outage detection features.
Image: Layers of the magnetic build plate, highlighting its flexibility and adhesion properties.
5. Тэхнічнае абслугоўванне
5.1 Рэгуляванне нацяжэння рамяня
Over time, belts may loosen, affecting print accuracy and potentially causing noise. The T3 features X-axis and Y-axis belt adjusters to maintain proper tension and printing accuracy.
Image: Instructions for adjusting the X-axis and Y-axis belts to ensure optimal tension.
5.2 Генеральная ўборка
Regularly clean the print bed, nozzle, and other accessible parts to prevent debris buildup. Use appropriate tools and cleaning solutions as recommended by the manufacturer.
5.3 Hot End Maintenance
Periodically inspect the hot end assembly. Ensure all components are securely fastened and free from filament residue. If necessary, carefully disassemble and reassemble the hot end, ensuring proper seating of all parts.
6. Выпраўленне непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| No power upon startup | Няправільны тtage switch setting, loose power connections, internal wiring issue. | Праверце блок харчавання voltage switch (115V/230V) is correctly set. Check all power cable connections. If issues persist, contact support. |
| Filament not extruding / Clogging | Nozzle clog, tangled filament, incorrect temperature. | Utilize the printer's clog detection feature to pause and clear the nozzle. Ensure filament is untangled and loaded correctly. Verify print temperature settings. |
| Prints not adhering to bed | Uneven bed, dirty print surface, incorrect bed temperature, first layer height issues. | Perform auto-leveling. Clean the magnetic build plate. Adjust bed temperature according to filament type. Calibrate first layer height. |
| Visible ringing or ghosting on prints | Loose belts, excessive print speed/acceleration, unstable printer placement. | Adjust belt tension using the X-axis and Y-axis adjusters. Reduce print speed and acceleration settings in your slicer. Ensure the printer is on a stable surface. |
| Filament run-out or breakage during print | Empty spool, brittle filament, excessive tension. | The printer will pause automatically. Replace the filament and resume printing. Store filament properly to prevent brittleness. |
7. Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| мадэль | SUNLU T3 (Terminator 3) |
| Тэхналогія друку | FDM (мадэляванне плаўленага нанясення) |
| Памер друку | 220 х 220 х 250 мм (8.66 х 8.66 х 9.84 цалі) |
| Максімальная хуткасць друку | 250 мм/с |
| Памеры прадукту | 17.32 х 15.75 х 18.5 цалі |
| Вага прадмета | 15.98 фунта (прыблізна 7.25 кг) |
| Матэрыял | Алюміній (рама) |
| Колер | T3 чорны |
| Матчына плата | 32-bit silent motherboard |
| Узровень шуму | Lower than 45dB (Full Silent Printing) |
| Выраўноўванне | 16-point 3D Touch Auto Leveling |
| Экструдар | Double Gear Metal Extruder |
| Паверхня для зборкі | Removable Magnetic Platform |
| Энергаспажыванне ў рэжыме | 360 ват |
Image: The physical dimensions of the SUNLU T3 3D Printer.
8. Інфармацыя аб гарантыі
Specific warranty details are not provided in the available product information. Please refer to the official SUNLU website or contact SUNLU customer service for comprehensive warranty terms and conditions.
9. Падтрымка кліентаў
For further assistance, technical support, or inquiries, please visit the official SUNLU store or contact their customer service department.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.