Strymon Lex Rotary Speaker Simulator Pedal V2 Instruction Manual

1. Уводзіны

The Strymon Lex Rotary Speaker Simulator Pedal V2 is designed to provide an authentic rotary speaker experience for guitarists. This manual will guide you through the setup, operation, and maintenance of your Lex V2 pedal, ensuring optimal performance and longevity.

2. Што ў скрынцы

• Strymon Lex Rotary Speaker Simulator Pedal V2
• Электразабеспячэнне
• Кіраўніцтва карыстальніка

3. Настройка

3.1 Патрабаванні да магутнасці

The Lex V2 pedal requires a 9V DC power supply, providing 300 microamps of current. Use only the included power supply or a compatible isolated power supply to prevent damage.

3.2 Connecting Your Pedal

Падключыце інструмент да IN jack. For mono output, use the ВЫХОД Л jack. For stereo output, connect to both ВЫХОД Л і ВЫХОД Р jacks. The pedal supports both mono and stereo input sources via a TRS input switch.

Figure 1: Rear panel connections of the Lex V2 pedal, including input, output, USB, and EXP/MIDI ports.

3.3 MIDI and Expression Pedal Connectivity

The EXP/MIDI jack allows for full MIDI control via a TRS 1/4" cable or USB-C. This enables control over various parameters and access to 300 MIDI preset locations. An expression pedal can also be connected here for real-time control of selected parameters.

4. Operating Your Lex V2 Pedal

The Lex V2 offers a comprehensive set of controls to shape your rotary speaker tone. Familiarize yourself with each knob and switch for optimal sound sculpting.

Малюнак 2: Закончанаview of the Lex V2 pedal's control surface.

4.1 ручкі кіравання

• ХУТКАСЦЬ: Adjusts the rotation speed of the simulated rotary speaker.
• MIC DISTANCE: Controls the simulated distance of the microphones from the rotary speaker, affecting stereo width and room ambience.
• HORN LEVEL: Adjusts the output level of the rotating horn, allowing it to cut through the mix or blend more subtly.
• ПРЭAMP ДРАЙВ: Adds grit and harmonic richness, simulating the tube-driven amplifier of a classic rotary speaker.
• ТОМУ: Boosts or cuts the overall output level by up to 6dB.
• СУХІ: Mixes in your dry signal, allowing for parallel processing.

Малюнак 3: падрабязна view of the RAMP, VOLUME, PREAMP DRIVE, and DRY controls.

4.2 Switches and Footswitches

• MIC (front/rear): Selects the microphone placement, either in front or behind the simulated cabinet.
• RAMP (slow/med/fast): Controls the acceleration/deceleration rate when switching between slow and fast rotary speeds.
• SLOW/FAST Footswitch: Toggles between slow and fast rotary speeds. Hold down for a gradual rotary brake effect.
• ON Footswitch: Уключае або абыходзіць эфект.

Малюнак 4: падрабязна view of the MIC, SPEED, MIC DISTANCE, HORN LEVEL, and SLOW/FAST footswitch.

4.3 Асноўныя магчымасці

• Complete Rotary Speaker System: Accurately reproduces the low-frequency bass rotor, rotating treble horn, tube-driven amplifier, and finely tuned microphone placement.
• Premium Analog JFET Input Circuit: Ensures superb responsiveness to your playing dynamics.
• Full MIDI Control: Control every switch, knob, and setting remotely via MIDI commands.
• 300 MIDI Preset Locations: Store and recall a vast array of custom sounds.

Figure 5: Visual representation of the premium analog JFET input circuit, rotor speed control, and full MIDI capabilities.

4.4 Дэманстрацыйнае відэа прадукту

5. Тэхнічнае абслугоўванне

To ensure the longevity and optimal performance of your Lex V2 pedal, follow these maintenance guidelines:

• Уборка: Выкарыстоўвайце мяккую сухую тканіну для чысткі вонкавага боку педалі. Пазбягайце выкарыстання абразіўных ачышчальнікаў або растваральнікаў.
• захоўванне: Захоўвайце педаль у прахалодным, сухім месцы, удалечыні ад прамых сонечных прамянёў і экстрэмальных тэмператур.
• Магутнасць: Заўсёды адключайце сілкаванне, калі педаль не выкарыстоўваецца працяглы час.

6. Выпраўленне непаладак

If you encounter any issues with your Lex V2 pedal, refer to the following common troubleshooting steps:

• Няма гуку: Check all cable connections (input, output, power). Ensure the pedal is receiving power and the ON footswitch is engaged. Verify your instrument and amplifier are functioning correctly.
• Непажаданы шум: Ensure you are using an isolated power supply. Check for faulty cables or interference from other electronic devices.
• Элементы кіравання не адказваюць: Perform a factory reset (refer to the full user manual for specific instructions). If the issue persists, contact Strymon support.

7. Тэхнічныя характарыстыкі

8. Гарантыя

The Strymon Lex Rotary Speaker Simulator Pedal V2 comes with a Гарантыя 2 год. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, visit the official Strymon webсайт.

9. Падтрымка

For further assistance, technical support, or to register your product, please visit the official Strymon website or contact their customer service department. You can find additional resources, FAQs, and firmware updates online.