1. Уводзіны
Thank you for choosing the Vikeri 4K 32MP Trail Camera. This manual provides detailed instructions for setting up, operating, and maintaining your camera to ensure optimal performance for wildlife monitoring, hunting, and security applications. Please read this manual thoroughly before using the camera.
2. Прадукт скончыўсяview
The Vikeri 4K 32MP Trail Camera is designed for high-resolution image and video capture in various outdoor environments. Key features include:
- Ultra-High Resolution: Captures 4K video and 32MP still images.
- Начное бачанне: Equipped with 40 no-glow infrared LEDs for clear night recordings up to 80ft.
- Хуткі час запуску: 0.1-second trigger speed to capture fast-moving subjects.
- Шырокае поле в View: 120° wide-angle lens for comprehensive monitoring.
- Трывалы дызайн: IP66 waterproof and dustproof rating, operating in temperatures from -22°F to 158°F.
- Рух актываваны: PIR sensor detects movement up to 80ft during the day and 65ft at night.
Figure 2.1: Vikeri 4K 32MP Trail Camera with a 32GB memory card and four AA batteries.
3. Настройка
- Усталюйце батарэі: Open the battery compartment. Insert 4 or 8 AA batteries (not included, unless specified in package) according to the polarity markings. Ensure proper orientation.
- Устаўце SD-карту: Open the camera latch. Locate the SD card slot. Insert a Class 10 or higher SD card (up to 256GB, 32GB included with some models) with the metal contacts facing down until it clicks into place.
- Уключэнне: Switch the camera mode selector from OFF to TEST or ON. In TEST mode, you can access the menu and adjust settings.
- Мантаж камеры:
- Use the included mounting strap to secure the camera to a tree or pole. Thread the strap through the slots on the back of the camera and tighten.
- Alternatively, use the tripod screw mount on the bottom for a tripod or other mounting accessories.
- Position the camera approximately 3-6 feet (1-2 meters) from the ground, aiming towards the area you wish to monitor.
4. Інструкцыя па эксплуатацыі
4.1. Выбар рэжыму
The camera has three main modes:
- OFF: Выключыце камеру.
- ТЕСТ: Дазваляе вам view the screen, adjust settings, and manually trigger photos/videos. The PIR sensor is active in this mode for testing detection range.
- ВКЛ: The camera enters monitoring mode. The screen turns off after a few seconds, and the camera will capture photos/videos automatically when motion is detected.
4.2. Menu Settings (in TEST mode)
Use the navigation buttons (UP, DOWN, LEFT, RIGHT, OK, MENU) to navigate and adjust settings.
| Абстаноўка | Апісанне | Рэкамендаванае значэнне |
|---|---|---|
| Рэжым | Select Photo, Video, or Photo+Video. | Фота+Відэа |
| Дазвол фота | Set image resolution (e.g., 32MP, 20MP, 16MP). | 32 МП |
| Дазвол відэа | Set video resolution (e.g., 4K, 2.7K, 1080P). | 4K |
| Адчувальнасць PIR | Adjust motion sensor sensitivity (High, Medium, Low). | Сярэдні |
| Інтэрвал трыгера | Time delay between detections (e.g., 5s, 10s, 30s). | 10 секунд |
| Прамежак часу | Capture images at set intervals regardless of motion. | Выкл |
| Дата і час | Усталюйце бягучую дату і час. | Ток |
Figure 4.1: The camera's 0.1-second trigger time ensures capture of fast-moving subjects.
Figure 4.2: The 120° wide-angle lens captures a broad field of view, detecting motion up to 65ft.
Figure 4.3: The IP66 rating ensures the camera is protected against rain, dust, ice, and snow.
Figure 4.4: Night vision with 40 no-glow 940nm LEDs provides clear images up to 80ft in darkness.
Figure 4.5: The camera supports ultra-clear 32MP images and 4K video resolution.
Малюнак 4.6: Выпample of a 32MP image and a frame from a 4K HD video captured by the camera.
5. Тэхнічнае абслугоўванне
- Уборка: Use a soft, dry cloth to clean the camera lens and PIR sensor window. Do not use abrasive cleaners or solvents.
- Замена батарэі: Replace all batteries at the same time. Do not mix old and new batteries or different types of batteries.
- Кіраванне SD-картай: Format the SD card regularly (at least once a month) using the camera's menu to ensure optimal performance and prevent data corruption.
- захоўванне: Калі камера не выкарыстоўваецца працяглы час, выміце батарэйкі і захоўвайце яе ў прахалодным, сухім месцы.
6. Выпраўленне непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Камера не ўключаецца | Low or dead batteries; incorrect battery polarity; faulty SD card. | Replace batteries; check polarity; remove SD card and try powering on. |
| Дрэнная якасць выявы/відэа | Брудны аб'ектыў; слабае асвятленне; няправільныя налады дазволу. | Clean lens; ensure sufficient light or use night vision; adjust resolution settings. |
| Camera not triggering | PIR sensitivity too low; trigger interval too long; PIR blocked. | Increase PIR sensitivity; shorten trigger interval; ensure clear view for PIR sensor. |
| Памылка SD-карты | SD card full; incompatible SD card; corrupted SD card. | Выдаліць files or replace SD card; use Class 10 or higher; format SD card in camera. |
7. Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| Дазвол фота | Да 32 Мп |
| Дазвол відэа | Да 4K |
| Спускавая хуткасць | 0.1 секунд |
| Дыяпазон начнога бачання | Up to 80ft (24m) with 40pcs No Glow IR LEDs |
| Дыяпазон выяўлення PIR | Day: 80ft (24m), Night: 65ft (20m) |
| Поле в View | 120° Wide Lens |
| Рэйтынг воданепранікальнасці | IP66 |
| Працоўная тэмпература | Ад -22°F да 158°F (ад -30°C да 70°C) |
| Захоўванне | SD Card (up to 256GB, Class 10 or higher) |
| Электразабеспячэнне | 4 or 8 AA Batteries (external DC 6V/2A supported) |
| Дысплей | 2.4-цалевы ВК-дысплей |
8. Гарантыя і падтрымка
Vikeri products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official Vikeri webсайт.
Калі ласка, захавайце доказы пакупкі для прэтэнзій па гарантыі.