Уводзіны
Thank you for choosing BERTSCHAT® Rechargeable Heated Insoles. These insoles are designed to provide warmth and comfort for your feet in various conditions, from outdoor activities to daily wear. This manual provides essential information for the safe and effective use, setup, operation, and maintenance of your heated insoles.
Прадукт скончаныview
The BERTSCHAT® Rechargeable Heated Insoles system includes the following components:
- 1 pair of BERTSCHAT® Heated Insoles
- 1 Пульт дыстанцыйнага кіравання
- 1 Зарадны кабель USB
- 2 Power Banks (integrated into insoles)
An image showing a pair of BERTSCHAT rechargeable heated insoles and their accompanying remote control. The insoles are black with a grey and orange design, featuring the 'BERTSCHAT' logo. The remote control is black with four orange buttons: power, H (High), M (Medium), and L (Low).
Настройка
- Першапачатковая зарадка: Before first use, fully charge both insoles. Connect the USB charging cable to the charging port on each insole and to a compatible USB power adapter (not included). The charging indicator light will show the charging status. A full charge typically takes several hours.
- Insole Placement: Insert the heated insoles into your shoes. Ensure they fit comfortably and do not cause any pressure points. If necessary, you may trim the insoles to fit your shoe size using the guide lines on the underside (trimming should only be done at the toe end and carefully to avoid damaging heating elements).
- Пульт дыстанцыйнага кіравання: The remote control is pre-paired with the insoles. Ensure the remote has a working battery.
Зарадка
The BERTSCHAT® Heated Insoles feature integrated power banks that are rechargeable via the provided USB cable.
- Locate the charging port on each insole.
- Connect the USB charging cable to the insole's charging port.
- Падключыце другі канец USB-кабеля да стандартнай крыніцы харчавання USB (напрыклад, адаптара для сеткі, USB-порта кампутара, паўэрбанка).
- The indicator light on the insole will illuminate during charging and change color or turn off when fully charged.
- Charging time may vary depending on the power source and remaining battery level.
Аперацыя
Your BERTSCHAT® Heated Insoles are operated using the wireless remote control.
- Уключэнне/выключэнне харчавання: Націсніце кнопку харчавання (⏻) on the remote control to turn the insoles on or off. The insoles will typically indicate power status with a light.
- Рэгуляванне ўзроўню цяпла: Use the 'H', 'M', and 'L' buttons on the remote to select your desired heat level:
- H (Высокі): Provides maximum heat, up to 68°C. Ideal for extremely cold conditions.
- М (сярэдні): Provides moderate heat for sustained comfort.
- L (Нізкі): Provides gentle warmth for extended use.
- Датчык тэмпературы: The integrated temperature sensor helps maintain an optimal foot climate and manages battery power efficiently.
Тэхнічнае абслугоўванне
- Уборка: Clean the insoles with a damp cloth. Do not submerge them in water or machine wash. Ensure they are completely dry before recharging or storing.
- захоўванне: Store the insoles in a cool, dry place when not in use. For long-term storage, it is recommended to charge the insoles to about 50% capacity every few months to preserve battery life.
- Акумулятар пульта дыстанцыйнага кіравання: Replace the remote control battery as needed. Refer to the remote control's specific instructions for battery type and replacement procedure.
Ліквідацыю непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Insoles not heating | Low battery; Insoles not turned on; Remote control issue. | Charge insoles fully. Press power button on remote. Check remote battery. |
| Пульт дыстанцыйнага кіравання не працуе | Remote battery depleted; Remote out of range; Pairing issue. | Replace remote battery. Ensure remote is close to insoles. Re-pair if necessary (refer to specific pairing instructions if provided with product). |
| Short heating duration | Insoles not fully charged; High heat setting used continuously; Extreme cold environment. | Ensure full charge. Use lower heat settings for longer duration. |
Тэхнічныя характарыстыкі
- матэрыял: 70% plastic, 20% polyester, 10% rubber
- Працягласць нагрэву: Up to 12 hours (depending on heat setting and environmental conditions)
- Максімальная тэмпература: Да 68°C
- Крыніца харчавання: Integrated rechargeable battery (USB cable provided)
- кантроль: Бесправадны пульт дыстанцыйнага кіравання
Інфармацыя па бяспецы
- Do not puncture, cut, or modify the insoles.
- Захоўваць удалечыні ад адкрытага агню і моцнага цяпла.
- Do not use if the insoles appear damaged.
- Consult a physician before use if you have circulatory problems, diabetes, or are pregnant.
- Не выкарыстоўвайце падчас сну.
- Захоўваць у месцах, недаступных дзецям.
- Выкарыстоўвайце толькі кабель для зарадкі, які ўваходзіць у камплект.
Гарантыя і падтрымка
For warranty information or technical support, please refer to the product packaging or contact BERTSCHAT® customer service directly. Keep your proof of purchase for warranty claims.