Прадукт скончаныview
The Lanzar VBE420P is a 4-band parametric equalizer designed to enhance your audio system with precise sound control. Featuring a 9 Volt RMS pre-amp output and selectable dual input sources (RCA and auxiliary), this unit allows for detailed adjustment of bass, mid-bass, mid, and high frequencies. It includes dedicated subwoofer gain control and a fader for front/rear speaker balance, ensuring a customized and immersive listening experience. Its compact half-DIN size makes it suitable for various installations.
Што ў скрынцы
Image: The Lanzar VBE420P 4-Band Parametric Equalizer shown with its packaging and included accessories.
- Lanzar VBE420P 4-Band Parametric Equalizer with Subwoofer
- 2 Мантажныя кранштэйны
- 8 шрубы з крыжападобнай галоўкай
- Чырвоны провад харчавання з засцерагальнікам 1А
- Папярэднеamp Line Aux Inputs via RCA & Phone Jacks
Настройка і ўстаноўка
Мантаж
The VBE420P features a half-DIN size, allowing for flexible installation in various vehicle dashboards or custom locations. Use the provided mounting brackets and screws to secure the unit. Ensure the mounting location allows for proper ventilation and access to controls.
Image: The Lanzar VBE420P Equalizer seamlessly integrated into a car's dashboard, demonstrating its compact size and potential for discreet installation.
Электраправодныя злучэнні
Выява: Падрабязны view of the rear panel of the Lanzar VBE420P, highlighting the RCA input and output jacks for various audio components.
- Падключэнне сілкавання: Connect the red power wire (with 1A fuse) to a switched 12V power source. Connect the black ground wire to a clean chassis ground. Connect the remote turn-on wire to your head unit's remote output.
- Крыніцы ўводу: The unit supports two input sources. Use the RCA input jacks for your main audio source (e.g., head unit). An auxiliary input is also available for connecting portable devices like MP3 players or phones.
- Выхадныя злучэнні: Connect the RCA outputs (Front, Rear, Subwoofer) to your power amplifiers. The subwoofer output provides a 9 Volt RMS pre-amp signal for powerful bass.
Operating the Equalizer
Image: The front control panel of the Lanzar VBE420P, illustrating the various knobs and switches for adjusting audio settings.
Элементы кіравання на пярэдняй панэлі
- Рэгулятар гучнасці: Adjusts the overall output volume of the equalizer.
- Fader (Front/Rear): Balances the audio output between the front and rear speakers.
- Subwoofer Gain Control: Рэгулюе ўзровень выходнага гуку канала сабвуфера.
- Кантроль частоты сабвуфера: Allows adjustment of the subwoofer crossover frequency between 60Hz and 90Hz.
- Equalizer Bands: Seven adjustable bands (50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 6KHz, 16KHz) allow for precise tuning of specific frequency ranges. Each band can be adjusted from -12dB to +12dB.
- Пераключальнік выбару ўваходу: Toggles between the main RCA input and the auxiliary input.
- Пераключальнік асвятлення: Controls the blue light illumination of the unit.
Тэхнічнае абслугоўванне
To ensure long-lasting performance of your Lanzar VBE420P equalizer, follow these simple maintenance guidelines:
- Уборка: Use a soft, dry cloth to wipe the exterior of the unit. Avoid abrasive cleaners or solvents that could damage the finish.
- Асяроддзе: Keep the equalizer away from excessive heat, moisture, and direct sunlight. Ensure adequate ventilation around the unit.
- Сувязі: Перыядычна правярайце ўсе злучэнні правадоў, каб пераканацца ў іх надзейнасці і адсутнасці карозіі.
Ліквідацыю непаладак
If you encounter issues with your Lanzar VBE420P, refer to the following common problems and solutions:
- Няма харчавання: Check the power, ground, and remote turn-on connections. Ensure the 1A fuse is intact.
- Няма гуку: Verify all RCA input and output connections. Check the input selector switch to ensure the correct source is selected. Confirm that connected ampвыратавальныя прылады ўключаны і працуюць.
- Скажэнне: Reduce the input level from your head unit or the equalizer's volume control. Ensure all equalizer bands are not set to extreme boost levels. Check for proper grounding.
- Нераўнамерны гук (злева/справа): Adjust the fader control to balance the sound between front and rear speakers. Check individual channel RCA connections.
Тэхнічныя характарыстыкі
Image: The Lanzar VBE420P Equalizer displaying its physical dimensions: 7 inches (length), 4.1 inches (width), and 1.10 inches (height).
| Асаблівасць | Спецыфікацыя |
|---|---|
| Нумар мадэлі | VBE420P |
| Памеры прадмета (Д х Ш х У) | 7 х 4.1 х 1.1 цалі |
| Вага прадмета | 1.67 фунта |
| ПапярэднеAmp Выхад Voltage | 9 Volt RMS |
| Аперацыйная Voltage | 11 В - 15 В (пастаянны ток) |
| Number of Equalizer Bands | 4 (Bass, Mid-Bass, Mid, High) |
| Frequency Adjustment Range | ад -12 дБ да +12 дБ на паласу |
| Рэгуляванне частоты сабвуфера | 60 Гц - 90 Гц |
| Крыніцы ўводу | RCA, дапаможны |
| Матэрыял | Метал, пластык |
| Колер | Чорны |
| Вытворца | Гук вакол |
Інфармацыя аб гарантыі
Lanzar products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official Lanzar webсайт. Захоўвайце пацвярджэнне пакупкі для любых гарантыйных прэтэнзій.
Падтрымка кліентаў
Should you require further assistance or have questions not covered in this manual, please contact Lanzar customer support. Contact information can typically be found on the product packaging or the official Lanzar website. Please have your model number (VBE420P) and purchase details ready when contacting support.
