Good Earth Lighting BO1307-RGB-09LF1-E

Ecolight LED Battery-Operated Bar Light Instruction Manual

Марка: Good Earth Lighting | мадэль: BO1307-RGB-09LF1-E

1. Уводзіны

This manual provides instructions for the installation, operation, and maintenance of your Ecolight LED Battery-Operated Bar Light. This versatile 9-inch LED light offers both 4000K bright white and RGB color-changing options, controlled by tapping the light or using the included infrared (IR) remote control. It is designed for various indoor applications such as under cabinets, in laundry rooms, living rooms, utility areas, or closets.

Што ўваходзіць у камплект:

  • Ecolight LED Bar Light
  • Інфрачырвоны (ВК) пульт дыстанцыйнага кіравання
  • 6 батарэйкі АА
  • Command Strips by 3M for damage-free mounting
  • Крапежныя шрубы
Ecolight LED Battery-Operated Bar Light packaging showing the light, remote, and included batteries and Command Strips.

Figure 1: Ecolight LED Bar Light with remote and mounting accessories.

2. Інфармацыя па бяспецы

  • Прачытайце ўсе інструкцыі перад устаноўкай і выкарыстаннем.
  • This product is intended for indoor use only. Do not expose to water or high humidity.
  • Не змешвайце старыя і новыя батарэі. Не змешвайце шчолачныя, стандартныя (вугляродна-цынкавыя) або акумулятарныя (нікель-кадміевыя) батарэі.
  • Выміце батарэйкі, калі ліхтар не будзе выкарыстоўвацца працяглы час.
  • Захоўвайце батарэі ў месцах, недаступных дзецям.
  • Do not stare directly into the LED light source.

3. Настройка

3.1 Устаноўка батарэі

  1. Remove the back battery compartment cover by sliding it off.
  2. Устаўце 6 батарэйкі тыпу АА, сачыце за правільнай палярнасцю (+/-), як паказана ўнутры адсека.
  3. Замяніце крышку батарэйнага адсека.
Back of the Ecolight LED Bar Light with the battery compartment open, showing 6 AA batteries being inserted.

Figure 2: Installing AA batteries into the light bar.

3.2 Варыянты мантажу

The Ecolight LED Bar Light can be mounted using either the included Command Strips for damage-free installation or screws for a permanent fixture.

Using Command Strips (Damage-Free Mounting):

  1. Clean the desired mounting surface with rubbing alcohol and let it dry completely.
  2. Separate the Command Strips. Remove the red liner from one side of each strip and press it firmly onto the back of the light bar.
  3. Remove the black liners from the exposed side of the Command Strips.
  4. Position the light bar on the cleaned surface and press firmly for 30 seconds.
  5. To remove, gently slide the light bar off the mounted base. Then, slowly stretch each strip downwards against the surface until it releases.
Ecolight LED Bar Light with Command Strips attached to the back, ready for mounting.

Figure 3: Attaching Command Strips to the light bar for mounting.

Using Screws (Permanent Mounting):

  1. Mark the desired screw locations on your mounting surface using the keyhole slots on the back of the light bar as a guide.
  2. Пры неабходнасці прасвідруйце пілотныя адтуліны.
  3. Insert the included screws into the pilot holes, leaving a small gap between the screw head and the surface.
  4. Align the keyhole slots on the back of the light bar with the screw heads and slide the light into place until secure.

3.3 Відэа ўстаноўкі

Video 1: Detailed instructions for installing and removing the Ecolight LED Bar Light using Command Strips.

4. Інструкцыя па эксплуатацыі

4.1 Tap Control

The light bar features a tap-on/off activation directly on its lens:

  • Націсніце адзін раз: Activates bright white light (4000K).
  • Націсніце двойчы: Initiates continuous RGB color cycling.
  • Націсніце тры разы: Sets the light to the currently displayed RGB color.
  • Націсніце чатыры разы: Выключае святло.
Hand tapping the lens of the Ecolight LED Bar Light to activate it.

Figure 4: Tap activation on the light bar lens.

4.2 Функцыі дыстанцыйнага кіравання

The included IR remote control provides comprehensive control over the light bar's features:

  • ВКЛ/ВЫКЛ: Уключае або выключае святло.
  • святлодыёд: Activates continuous RGB color cycling.
  • Белы: Activates 4000K bright white light.
  • +/- (Brightness): Adjusts the brightness level (dimmable).
  • R, G, B Buttons: Selects specific Red, Green, or Blue colors.
  • Каляровае кола: Allows selection of various colors within the RGB spectrum.
  • УСТАВ: Confirms a selected color from the color wheel.
  • Timer (5, 15, 30, 60 minutes): Sets an auto-off timer for the specified duration.
Infrared remote control for the Ecolight LED Bar Light, showing buttons for power, color selection, dimming, and timer functions.

Figure 5: Remote control for the LED Bar Light.

Three images showing the Ecolight LED Bar Light emitting blue, red, and green light, demonstrating its RGB color-changing capability.

Малюнак 6: Выпamples of RGB color output from the light bar.

5. Тэхнічнае абслугоўванне

5.1 Замена батарэі

When the light output diminishes or the light stops functioning, it's time to replace the batteries. The easy battery change compartment allows you to slide the light out without removing the mounting strips (if used).

  1. If mounted with Command Strips, gently slide the light bar off its mounted base.
  2. Remove the back battery compartment cover.
  3. Replace all 6 AA batteries with new ones, observing correct polarity.
  4. Replace the battery compartment cover and reattach the light bar to its base (if applicable).

5.2 Ачыстка

To clean the light bar, wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electronic components.

6. Выпраўленне непаладак

праблемаМагчымая прычынаРашэнне
Святло не ўключаецца.Разраджаныя або няправільна ўсталяваныя батарэйкі.Замяніце батарэйкі, сачыце за правільнай палярнасцю.
Не працуе пульт дыстанцыйнага кіравання.Remote battery is dead or remote is too far from the light.Ensure remote is within range (approx. 10-15 ft). Replace remote battery if necessary.
Святлоаддача цьмяная.Low battery power or dimming function activated.Replace batteries. Use the '+' button on the remote to increase brightness.
Light does not change colors.Выбраны няправільны рэжым.Ensure 'LED' or a specific color button is pressed on the remote, or tap the light multiple times for color cycling.

7. Тэхнічныя характарыстыкі

  • Нумар мадэлі: BO1307-RGB-09LF1-E
  • Тып крыніцы святла: святлодыёд
  • Яркасць: 80 люмен
  • Каляровая тэмпература: 4000K (White), RGB Color Changing
  • Крыніца харчавання: 6 батарэек АА (у камплекце)
  • Тэрмін службы батарэі: Прыкладна 100 гадзіны
  • Памеры прадукту: 9" Ш х 2.5" В х 1" Г
  • Вага прадмета: 3.68 унцыі
  • матэрыял: Пластыкавыя
  • Метад кантролю: Tap, Infrared Remote
  • Асаблівасці: Dimmable, Auto-Off Timer (5, 15, 30, 60 min)
  • Выкарыстанне ў памяшканні/на вуліцы: Толькі ў памяшканні
  • Сярэдні тэрмін службы: 30,000 гадзін
Diagram showing the dimensions of the Ecolight LED Bar Light: 9.60 inches long, 2.16 inches wide, and 1 inch deep.

Малюнак 7: Памеры вырабу.

8. Гарантыя і падтрымка

This Ecolight LED Battery-Operated Bar Light comes with a 6-гадовая абмежаваная гарантыя. For warranty claims, technical support, or further assistance, please contact Good Earth Lighting customer service. Refer to the product packaging or the official Good Earth Lighting webсайт для кантактных дадзеных.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.