GoolRC RYH3398198704744LX

Інструкцыя па эксплуатацыі бесшчоткавага рухавіка GoolRC 2212 1000KV і стабілізатара на 30A

1. Прадукт скончыўсяview

This manual provides instructions for the GoolRC 2212 1000KV Brushless Motor and 30A Electronic Speed Controller (ESC) combination. This system is designed for use in various remote-controlled aircraft, including 400-450 class helicopters, airplanes, and multi-rotor drones. It offers a reliable power solution for your RC models.

2. Змесціва ўпакоўкі

У пакет уваходзяць наступныя кампаненты:

  • 1x GoolRC 2212 1000KV Brushless Motor
  • 1x GoolRC 30A Electronic Speed Controller (ESC)
  • 1x Motor Mounting Cross Plate
  • Screws for motor mounting
GoolRC 2212 1000KV Brushless Motor and 30A ESC

Image 2.1: GoolRC 2212 1000KV Brushless Motor and 30A ESC with mounting hardware.

GoolRC 2212 1000KV Brushless Motor with mounting plate and screws

Image 2.2: GoolRC 2212 1000KV Brushless Motor, mounting cross plate, and screws.

3. Тэхнічныя характарыстыкі

3.1. 2212 1000KV Brushless Motor

Рэйтынг КВ:1000KV
Максімальная эфектыўнасць:80%
Max Efficiency Current:4-10A (>75%)
No Load Current @ 10V:0.5А
Number of Cells (Li-Poly):2-3 Li-Poly
Памер рухавіка:27.5mm (Diameter) * 38mm (Length)
Дыяметр вала:3.17 мм
матэрыял:Plastic, Metal Alloys
GoolRC 2212 1000KV Brushless Motor dimensions

Image 3.1: Dimensions of the 2212 1000KV Brushless Motor.

3.2. 30A Electronic Speed Controller (ESC)

Бесперапынны выхад:30А
Burst Output:40A (up to 10 seconds)
Уваходны кнtage:2-3 cells Li-Poly battery or 5-9 cells NiCd/NIMh battery
Выхад BEC:2A / 5V (Linear mode)
Раздымы:T-Plug for battery, 3.5mm Banana Connectors for motor
GoolRC 30A ESC with T Plug and 3.5mm Banana Connectors labeled

Image 3.2: GoolRC 30A ESC with T-Plug battery connector and 3.5mm banana motor connectors.

4. Настройка і ўстаноўка

Follow these steps for proper installation of the motor and ESC in your RC model:

  1. Мантаж рухавіка: Securely attach the 2212 1000KV brushless motor to your model's motor mount using the provided cross plate and screws. Ensure the motor is firmly fixed to prevent vibrations during operation.
  2. ESC to Motor Connection: Connect the three 3.5mm banana connectors from the ESC to the three corresponding wires of the brushless motor. The order of connection may affect the motor's rotation direction. If the motor spins in the wrong direction, swap any two of the three motor wires.
  3. Падключэнне ESC да прымача: Plug the small signal cable from the ESC into the throttle channel (usually channel 3) of your RC receiver. Ensure the polarity is correct (signal, positive, negative).
  4. Падключэнне ESC да акумулятара: Connect your compatible 2-3S Li-Poly or 5-9 cell NiCd/NIMh battery to the T-Plug connector on the ESC. Ensure correct polarity (red to positive, black to negative).
GoolRC 30A ESC with T Plug and 3.5mm Banana Connectors

Image 4.1: GoolRC 30A ESC showing battery (T-Plug) and motor (banana) connectors.

5. Інструкцыя па эксплуатацыі

Before operating your RC model, ensure all connections are secure and the battery is fully charged.

  1. Настройка перадатчыка: Ensure your RC transmitter's throttle stick is at the lowest position (off) before connecting the battery.
  2. Паслядоўнасць уключэння: First, turn on your RC transmitter. Then, connect the battery to the ESC. The ESC will typically emit a series of beeps indicating successful initialization and cell count detection.
  3. Каліброўка дросельнай засланкі (пры неабходнасці): Some ESCs require throttle range calibration with your transmitter. Refer to your transmitter's manual for specific instructions. Generally, this involves powering on the ESC with the throttle stick at maximum, then moving it to minimum when prompted by beeps.
  4. Перадпалётная праверка: Before flight, perform a thorough check of all controls, ensuring the motor responds correctly to throttle input and spins in the desired direction.
  5. Кіраванне батарэяй: Always monitor your battery voltage during operation. Avoid over-discharging Li-Poly batteries, as this can cause permanent damage.

6. Тэхнічнае абслугоўванне

Regular maintenance ensures the longevity and optimal performance of your motor and ESC.

  • Уборка: Keep the motor and ESC free from dust, dirt, and moisture. Use a soft brush or compressed air to clean components.
  • агляд: Periodically inspect all wires and connectors for signs of wear, fraying, or corrosion. Ensure all solder joints are secure.
  • Падшыпнікі рухавіка: Check motor bearings for smooth operation. If they feel rough or noisy, they may need lubrication or replacement.
  • захоўванне: Store the motor and ESC in a dry, cool environment away from direct sunlight and extreme temperatures. Disconnect batteries when not in use.

7. Выпраўленне непаладак

праблемаМагчымая прычынаРашэнне
Motor does not spin or stuttersLoose motor connections, incorrect ESC-motor wiring, faulty motor/ESC, low battery voltage.Check all motor wire connections. Swap any two motor wires to change rotation direction. Ensure battery is charged. Inspect motor and ESC for damage.
ESC does not arm or respondIncorrect throttle stick position, receiver not powered, faulty signal cable, ESC not calibrated.Ensure throttle stick is at minimum. Check receiver power and signal cable connection. Perform throttle calibration.
Рухавік круціцца ў няправільным кірункуIncorrect motor wire connection order.Swap any two of the three motor wires connecting the ESC to the motor.
ESC gets excessively hotOverloading, insufficient cooling, incorrect propeller size, short circuit.Reduce load, ensure adequate airflow around ESC. Check for short circuits. Use appropriate propeller size for the motor.
ESC not suitable for RC carsThis ESC is designed for aircraft (planes, helicopters, multi-rotors) and may lack specific programmability or features required for RC car applications (e.g., reverse, braking modes).This product is optimized for aircraft. For RC car applications, a dedicated car ESC with appropriate features is recommended.

8. Інфармацыя па бяспецы

Please read and adhere to the following safety guidelines to prevent injury or damage:

  • Высокая магутнасць: Brushless motor systems can generate significant power. Always handle with care.
  • Часткі, якія верцяцца: Keep hands, loose clothing, and objects clear of the propeller when the motor is connected to a battery. A spinning propeller can cause severe injury.
  • Бяспека акумулятара: Use only compatible batteries. Follow all battery manufacturer's instructions for charging, discharging, and storage. Never short-circuit battery terminals.
  • Электрабяспека: Ensure all connections are secure and insulated to prevent short circuits. Avoid operating in wet conditions.
  • Нагляд дарослых: This product is recommended for users 16 years and up. Younger users should have adult supervision.
  • Вентыляцыя: Ensure the ESC has adequate ventilation during operation to prevent overheating.

9. Гарантыя і падтрымка

For warranty information, technical support, or assistance with your GoolRC 2212 1000KV Brushless Motor and 30A ESC, please contact GoolRC customer service through their official channels or the retailer from whom the product was purchased. Please provide your product model number (RYH3398198704744LX) and purchase details when seeking support.