Кіраўніцтва карыстальніка бесправаднога лазернага сканера штрых-кодаў HDWR HD44

1. Уводзіны

This manual provides comprehensive instructions for the safe and efficient operation of your HDWR HD44 Wireless Laser Barcode Scanner. Please read this manual thoroughly before using the device and retain it for future reference.

The HDWR HD44 wireless barcode scanner is designed for durability and comfort. Its ergonomic shape ensures convenient daily use. This scanner operates wirelessly using radio wave technology, providing freedom of movement within a 5-meter range via its USB receiver. An integrated memory allows storage of thousands of scanned codes for later transfer to a computer.

The scanner supports various 1D barcodes, including:

• EAN-13, EAN-8, UPC-A, UPC-E
• Code 39, Code 93, Code 128
• Interleaved 2 of 5, ITF-14, Industrial 2 of 5, Matrix 2 of 5
• Codabar, Code 11, MSI/Plessey, UK/Plessey
• GS1 DataBar, GS1 DataBar Limited

Image 1.1: HDWR HD44 Wireless Laser Barcode Scanner, USB receiver, and charging cable.

2. Змесціва ўпакоўкі

Калі ласка, пастаўце галачку для наступных пунктаў:

• HDWR HD44 Wireless Barcode Scanner
• USB-прыёмнік
• USB-кабель для зарадкі
• Кіраўніцтва карыстальніка

Image 2.1: The HDWR HD44 Wireless Barcode Scanner.

3. Настройка

3.1 Зарадка сканера

Before first use, fully charge the scanner. Connect the USB charging cable to the scanner's charging port and the other end to a USB power source (e.g., computer USB port, USB wall adapter). The charging indicator light will show the charging status.

3.2 Падключэнне USB-прыёмніка

1. Locate the USB receiver included in the package.
2. Plug the USB receiver into an available USB port on your computer or host device.
3. The system should automatically detect and install the necessary drivers. No manual driver installation is typically required.

Image 3.1: The USB receiver for wireless connection.

3.3 Уключэнне/выключэнне

To power on the scanner, press and hold the trigger button for a few seconds until you hear a beep and the indicator light turns on. To power off, press and hold the trigger button again until the scanner powers down.

4. Інструкцыя па эксплуатацыі

4.1 Асноўнае сканаванне

1. Ensure the scanner is powered on and connected to your device via the USB receiver.
2. Накіруйце лазерны прамень сканера на штрых-код, які вы хочаце сканаваць.
3. Press the trigger button. A successful scan will be indicated by a beep and/or a change in the indicator light.
4. The scanned data will be transmitted to your connected computer as keyboard input.

Image 4.1: The HDWR HD44 scanner operating wirelessly.

4.2 Using Integrated Memory

The HDWR HD44 scanner features an integrated memory to store scanned barcodes when out of range or when direct transmission is not desired. To utilize this feature:

1. Scan barcodes as usual. The scanner will automatically store them if not connected or if configured for storage mode.
2. To transfer stored data, ensure the scanner is connected to your computer via the USB receiver.
3. Scan the 'Upload Data' configuration barcode (refer to the full user manual for specific configuration barcodes). The stored data will then be transmitted to your computer.

5. Тэхнічнае абслугоўванне

5.1 Ачыстка

To maintain optimal performance, keep the scanner clean. Use a soft, dry cloth to wipe the exterior. For the scanning window, use a soft, lint-free cloth lightly dampачышчайце мяккім неабразіўным ачышчальнікам. Не выкарыстоўвайце агрэсіўныя хімікаты або абразіўныя матэрыялы.

5.2 Сыход за акумулятарам

The scanner uses a Lithium-ion battery. To prolong battery life:

• Пазбягайце частай поўнай разрадкі акумулятара.
• Захоўвайце сканер у прахалодным, сухім месцы, калі ён не выкарыстоўваецца працяглы час.
• Charge the battery regularly, even if not in constant use.

6. Выпраўленне непаладак

6.1 Сканер не адказвае

• Ensure the scanner is charged. Connect it to the charging cable and a power source.
• Verify the scanner is powered on. Press and hold the trigger button.
• Check the USB receiver connection to your computer. Try a different USB port.

6.2 Штрыхкоды не скануюцца

• Пераканайцеся, што штрых-код чысты, непашкоджаны і разборліва надрукаваны.
• Адрэгулюйце адлегласць і вугал паміж сканерам і штрых-кодам.
• Check if the barcode type is supported by the scanner (refer to Section 1: Introduction).
• Clean the scanner's optical window as described in Section 5.1.

6.3 Data Not Transmitting to Computer

• Confirm the USB receiver is properly connected and recognized by the computer.
• Ensure the scanner is within the 5-meter wireless range of the receiver.
• If data was stored in memory, ensure you have initiated the data upload process (refer to Section 4.2).

7. Тэхнічныя характарыстыкі

8. Гарантыя і падтрымка

8.1 Гарантыя вытворцы

The HDWR HD44 Wireless Laser Barcode Scanner comes with a 2-гадовая гарантыя вытворцыГэтая гарантыя распаўсюджваецца на дэфекты матэрыялаў і вырабу пры нармальным выкарыстанні. Калі ласка, захавайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.

8.2 Падтрымка кліентаў

For technical assistance, troubleshooting, or warranty inquiries, please contact HDWR customer support through their official website or the retailer where the product was purchased. Please have your model number (HD44) and purchase details ready when contacting support.