TORQUE Airbag Air Bag Suspension Kit User Manual

Прадукт скончаныview

The TORQUE Airbag Air Bag Suspension Kit (Model TR2400AS) is designed to enhance the load-carrying capacity, stability, ride quality, and braking effectiveness of your vehicle. This kit provides adjustable air support to maintain optimal vehicle height and performance, especially when towing or carrying heavy loads. It serves as a direct OEM replacement for Firestone Ride Rite W21-760-2400 systems.

Image: Complete TORQUE Airbag Air Bag Suspension Kit, including air bags, brackets, and hardware, alongside its retail packaging.

Інфармацыя аб камплектацыі

This air helper spring kit is specifically designed for the following vehicle models and years:

• 2005-2007 Ford F250 (4WD only)
• 2005-2007 Ford F350 (4WD only)

Note: This kit is NOT compatible with vehicles equipped with an in-bed hitch.

Image: Visual representation of compatible Ford F-Series trucks and specific fitment years (2005-2007 F250/F350 4WD only).

Асноўныя асаблівасці і перавагі

• Load Leveling Support: Provides up to 5,000 lbs of load leveling capacity, ensuring your vehicle remains level even with heavy loads.
• Палепшаная якасць язды: Reduces inter-leaf friction and softens contact between the axle and frame, minimizing bottoming out.
• Палепшаная стабільнасць: Maximizes the vehicle's safe load-carrying capacity and improves overall stability.
• Better Braking Effectiveness: Contributes to more effective braking performance under load.
• Трывалая канструкцыя: Air inlets are made from 4140 grade steel, offering 25% more durability compared to OEM 1040 grade steel. Air springs are designed to withstand up to 500 PSI, though 100 PSI is the recommended maximum for safer and more comfortable rides.
• Direct OEM Replacement: Directly replaces Firestone Ride Rite W21-760-2400.

Image: Illustration demonstrating the 5,000 lbs load leveling capacity provided by the air suspension system.

Image: Visual comparison showing a truck towing a trailer without and with Torque Parts Suspension, highlighting improved load leveling and reduced sag.

What's Included in the Kit

The TORQUE Airbag Air Bag Suspension Kit includes all necessary components for a complete installation:

• 2 x Air Bags
• All necessary Brackets
• Кіраўніцтва па ўстаноўцы
• All required Bolts and Nuts
• Inflation Valves
• Каленныя фітынгі
• Цюбінг

Image: A detailed layout of all components included in the kit: two air bags, various brackets, bolts, nuts, air lines, and inflation valves.

Відэа: Оверview of the TORQUE Air Bag Suspension Kits, showcasing the components and highlighting their benefits for various vehicle uses like towing and off-roading.

Інструкцыя па ўстаноўцы

The TORQUE Airbag Air Bag Suspension Kit is designed for a straightforward, bolt-on installation without requiring any frame drilling. Please refer to the included detailed installation manual for step-by-step instructions specific to your vehicle model.

Агульныя этапы ўстаноўкі:

1. Падрыхтуйце аўтамабіль: Park the vehicle on a level surface, engage the parking brake, and block the wheels. Lift the rear of the vehicle and support it with jack stands.
2. Выдаліць існуючыя кампаненты (калі ёсць): Follow the manual to remove any existing components that may interfere with the installation of the air springs.
3. Усталюйце кранштэйны: Position and secure the upper and lower brackets to the vehicle's frame and axle, respectively. The brackets are designed for a no-drill installation.
4. Усталяваць пнеўматычныя падвескі: Mount the air bags between the upper and lower brackets. Ensure proper alignment and secure attachment using the provided bolts and nuts.
5. Падключэнне паветраных ліній: Attach the elbow fittings to the air bags and connect the tubing. Route the tubing away from hot or moving parts to the inflation valves.
6. Усталюйце напаўняльныя клапаны: Choose a convenient and protected location (e.g., bumper, wheel well) to install the inflation valves. Connect the air lines from the air bags to these valves.
7. Праверце ўцечкі: Inflate the air springs to a low pressure (e.g., 20 PSI) and check all connections for air leaks using a soapy water solution. Tighten connections as needed.
8. Ніжні транспартны сродак: Carefully lower the vehicle off the jack stands.
9. Канчатковае рэгуляванне: Inflate the air springs to the desired pressure based on your load requirements.

Always consult the comprehensive installation manual provided with your kit for detailed, model-specific instructions and safety precautions.

Інструкцыя па эксплуатацыі

The TORQUE Airbag Suspension Kit allows you to adjust the air pressure to suit varying load conditions, optimizing ride height and comfort.

Рэгуляванне ціску паветра:

• Minimum PSI: 5 PSI (pounds per square inch)
• Maximum PSI: 100 PSI

Use an air compressor to inflate the air springs via the installed inflation valves. Monitor the pressure with a gauge. Adjust pressure as follows:

• Light Load/Unloaded: Maintain minimum pressure (5 PSI) for optimal ride comfort.
• Heavy Load/Towing: Increase air pressure gradually until the vehicle achieves a level stance. Do not exceed 100 PSI.
• Off-Roading: Adjust pressure as needed for terrain, ensuring not to exceed maximum or fall below minimum.

Proper air pressure ensures even tire wear, improved handling, and prevents bottoming out of the suspension.

Тэхнічнае абслугоўванне

Regular maintenance of your TORQUE Airbag Suspension Kit will ensure its longevity and optimal performance.

• Рэгулярны агляд: Periodically inspect the air bags, air lines, and fittings for any signs of wear, damage, or leaks.
• Праверце ціск паветра: Check air pressure regularly, especially before and after towing or hauling heavy loads. Adjust as necessary.
• Чыстыя кампаненты: Трымайце падушкі бяспекі і навакольныя кампаненты ў чысціні ад бруду, смецця і агрэсіўных матэрыялаў.
• Пазбягайце залішняй/недастатковай інфляцыі: Always adhere to the minimum (5 PSI) and maximum (100 PSI) pressure limits to prevent damage to the air springs.
• Крутоўны момант крапяжу: Periodically check and re-torque all fasteners to ensure they remain secure.

Ліквідацыю непаладак

Here are solutions to common issues you might encounter with your air suspension kit:

Часта задаюць пытанні:

Q: Will it fit if my vehicle is lifted front and rear?
A: If the front of the truck is lifted, it will fit. If the rear of the truck is lifted, you may need a spacer. Please refer to the spacer table below.

You can search for spacers by part number.

Q: Will it fit if my vehicle is lowered?
A: No, it will NOT fit if your vehicle is lowered.

Q: What should be the minimum and maximum PSI?
A: Minimum is 5 PSI. Maximum is 100 PSI.

Q: Can I use a cradle?
A: Yes, you can use a cradle with this kit. Our cradle part number is TR3004. You can search the cradle by part number.

Image: A graphic detailing frequently asked questions regarding vehicle lift, lowering, PSI limits, and cradle compatibility, including a spacer selection table.

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

For warranty information and technical support, please refer to the documentation included with your product or visit the official Torque website. You can also contact customer service through the retailer where you purchased the product.

Каб атрымаць дадатковыя рэсурсы і інфармацыю пра прадукт, наведайце Torque Store on Amazon.