iTOMA CKS213 Digital Alarm Clock User Manual

Уводзіны

Thank you for choosing the iTOMA CKS213 Digital Alarm Clock. This manual provides detailed instructions for setting up, operating, and maintaining your new alarm clock. Please read this manual thoroughly before use to ensure proper function and to maximize your user experience.

Інфармацыя па бяспецы

• Не падвяргайце прыладу ўздзеянню экстрэмальных тэмператур, прамых сонечных прамянёў, пылу або вільготнасці.
• Ensure the power adapter is connected to an easily accessible outlet.
• Выкарыстоўвайце толькі прадастаўлены адаптар сілкавання. Выкарыстанне несанкцыянаваных адаптараў можа пашкодзіць прыладу і ануляваць гарантыю.
• Трымайце прыладу далей ад вады ці іншых вадкасцей.
• Do not attempt to disassemble or modify the unit. This may cause damage or injury.
• The backup battery is for memory retention only; the clock requires main power for full operation.

Змест пакета

Калі ласка, праверце ўпакоўку на наяўнасць наступных прадметаў:

• iTOMA CKS213 Digital Alarm Clock
• Power Adapter (60-inch cable)
• CR2032 Backup Battery (pre-installed or included)
• Кіраўніцтва карыстальніка (гэты дакумент)

Прадукт скончаныview

Familiarize yourself with the various features and controls of your iTOMA CKS213 Digital Alarm Clock.

Настройка

1. Падключэнне сілкавання

Connect the provided power adapter to the DC input port on the back of the alarm clock, then plug the adapter into a standard wall outlet. The clock display will illuminate.

2. Installing Backup Battery

The clock includes a pre-installed CR2032 battery for backup. This battery preserves time and alarm settings during a power outage. The clock will not operate on battery power alone; it requires main power for the display and alarm functions.

3. Пачатковая ўстаноўка часу

Upon initial power connection, the clock may automatically set the time. If manual adjustment is needed, press and hold the 'CLOCK' button located on the top of the unit. Use the 'SETTING+' and 'SETTING-' buttons to adjust the hour and minute. Press 'CLOCK' again to confirm.

4. 12/24-гадзінны фармат

To switch between 12-hour and 24-hour time formats, press the '12/24H' button (often integrated with 'CLOCK' or 'SETTING' buttons, refer to the top panel diagram on your device). In 12-hour format, 'AM' or 'PM' indicators will be displayed.

Інструкцыя па эксплуатацыі

1. Setting Dual Alarms (AL1 & AL2)

The iTOMA CKS213 features two independent alarms. Follow these steps to set an alarm:

1. Press and hold the 'AL1' or 'AL2' button to enter alarm setting mode. The hour display will flash.
2. Use the 'SETTING+' and 'SETTING-' buttons to adjust the desired alarm hour.
3. Press 'AL1' or 'AL2' again to confirm the hour and move to minute adjustment. The minute display will flash.
4. Use the 'SETTING+' and 'SETTING-' buttons to adjust the desired alarm minute.
5. Press 'AL1' or 'AL2' again to confirm the minute and select the alarm mode.
6. Use 'SETTING+' or 'SETTING-' to cycle through the 4 alarm modes:
• ALL-7-DAY: Сігналізацыя гучыць кожны дзень.
• БЫДЗЕНЬ: Сігналізацыя гучыць з панядзелка па пятніцу.
• WEEKEND: Сігналізацыя гучыць у суботу і нядзелю.
• SINGLE DAY: Alarm sounds only on the selected day.
7. Press 'AL1' or 'AL2' one last time to save the alarm settings and activate the alarm. An alarm icon will appear on the display.

2. Функцыя паўтору будзільніка

When an alarm sounds, press the large 'SNOOZE' button on the top of the clock to temporarily silence the alarm for 9 minutes. You can repeat this up to 6 times. To turn off the alarm completely, press the 'AL1 OFF' or 'AL2 OFF' button.

3. Display Brightness and Automatic Dimmer

The clock features a 0.9-inch orange LED display with adjustable brightness. You can manually set the brightness or enable the automatic dimmer function.

• Ручная яркасць: Press the 'DIMMER' button repeatedly to cycle through 3 brightness levels (High, Medium, Low).
• Automatic Dimmer: The built-in sensor automatically adjusts the display brightness based on ambient light conditions in the room. This feature ensures the display is not too bright in a dark room or too dim in a well-lit environment.

4. Праца начнога святла

The clock includes a 2-level orange night light. To activate or adjust the night light, locate the 'NIGHT LED' button (or similar) on the top panel and press it to cycle through the brightness levels or turn it off.

5. Порт для зарадкі USB

A USB-A charging port is located on the back of the unit. You can use this port to charge your smartphone or other mobile devices. Connect your device's USB charging cable to this port. The output is typically 1A.

Тэхнічнае абслугоўванне

• Уборка: Працірайце гадзіннік мяккай сухой тканінай. Не выкарыстоўвайце абразіўныя ачышчальнікі або растваральнікі.
• Замена батарэі: If the backup battery needs replacement, open the battery compartment on the bottom of the unit and replace the CR2032 battery with a new one, observing polarity.

Ліквідацыю непаладак

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

iTOMA products are designed for reliability and performance. For any questions, concerns, or technical support regarding your CKS213 Digital Alarm Clock, please refer to the contact information provided with your purchase or visit the official iTOMA webсайт. Калі ласка, захавайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.