JEYI I9-Seal

JEYI I9-Seal M.2 NVMe SSD Enclosure User Manual

Model: I9-Seal

Уводзіны

This manual provides comprehensive instructions for the installation, operation, and maintenance of your JEYI I9-Seal M.2 NVMe SSD Enclosure. This device converts an NVMe M.2 solid-state drive into a portable external storage solution with high-speed USB 3.2 Gen 2 connectivity.

Змест пакета

Калі ласка, пераканайцеся, што ўсе пералічаныя ніжэй прадметы ўваходзяць у ваш пакет:

  • JEYI M.2 NVMe SSD Enclosure
  • Цеплавыя пракладкі
  • Адвёртка
  • USB-A to USB-C Cable (10Gbps)
  • USB-C to USB-C Cable (10Gbps)
  • Шнурок
JEYI I9-Seal M.2 NVMe SSD Enclosure package contents
Image: Contents of the JEYI I9-Seal M.2 NVMe SSD Enclosure package, showing the enclosure, two cables, thermal pads, a screwdriver, and a lanyard.

Інструкцыя па наладзе

Follow these steps to install your NVMe M.2 SSD into the JEYI I9-Seal enclosure:

  1. Падрыхтуйце корпус: Gently slide open the enclosure to reveal the internal PCB.
  2. Нанесці цеплавую пракладку: Peel off the protective films from both sides of a thermal pad and carefully place it onto the NVMe SSD chip area. This aids in heat dissipation.
  3. Insert NVMe SSD: Align your NVMe M.2 SSD (2280 form factor only) with the M-Key slot on the PCB. Insert the SSD firmly but gently into the slot at an angle.
  4. Забяспечце SSD-дыск: Once inserted, gently push down the SSD and secure it with the provided screw using the included screwdriver. Ensure the SSD is flat and securely fastened.
  5. Зачыніце корпус: Carefully slide the enclosure cover back into place until it clicks securely.
Выбухнуў view of JEYI I9-Seal M.2 NVMe SSD Enclosure showing internal components and thermal pad placement
Image: An exploded diagram illustrating the internal structure of the enclosure, including the aluminum alloy case, heat dissipation shell, thermal pad, and screw, demonstrating how to assemble the SSD within the enclosure.
Diagram showing compatibility with M.2 2280 NVMe SSDs only
Image: A visual guide indicating that the enclosure is compatible exclusively with M.2 2280 NVMe SSDs, with other sizes (2230, 2242, 2260) marked as incompatible.

Інструкцыя па эксплуатацыі

Once your NVMe SSD is securely installed, connect the enclosure to your device:

  1. Падключэнне да прылады: Use either the provided USB-C to USB-C cable or the USB-A to USB-C cable to connect the enclosure to a compatible USB port on your computer, smartphone, tablet, or game console.
  2. Індыкатар харчавання: A small LED indicator on the enclosure will illuminate, signifying that the device is powered on and connected.
  3. Disk Recognition: Your operating system (Windows, macOS, Linux, Android, iOS) should automatically detect the new storage device. If it's a new SSD, you may need to initialize and format it through Disk Management (Windows) or Disk Utility (macOS) before use.
  4. Перадача дадзеных: You can now perform data backup, file transfers, disk upgrades, data recovery, or use it for storage expansion. The enclosure supports USB 3.2 Gen 2 speeds up to 10Gbps.
JEYI I9-Seal M.2 NVMe SSD Enclosure connected to various devices like laptop, smartphone, and tablet
Image: The JEYI I9-Seal enclosure connected to a laptop, smartphone, and tablet, demonstrating its wide compatibility with Windows, Linux, and Mac OS 8.0 and above systems, including Thunderbolt compatibility.
Comparison of USB data transfer speeds, highlighting 10Gbps for USB 3.2 Gen 2
Image: A graphic illustrating data transfer speeds, showing USB 2.0 at 480Mbps, USB 3.0 (USB 3.2 Gen 1) at 5Gbps, and USB 3.1 (USB 3.2 Gen 2) at 10Gbps, emphasizing the enclosure's high-speed capability for NVMe drives.

Тэхнічнае абслугоўванне

To ensure optimal performance and longevity of your JEYI I9-Seal enclosure:

  • Кіраванне цяплом: Алюмініевы сasing and thermal pads are designed for efficient heat dissipation. During prolonged high-speed data transfers, the enclosure may become warm to the touch. This is normal and indicates effective heat transfer from the SSD.
  • Уборка: Для чысткі вонкавых паверхняў корпуса выкарыстоўвайце мяккую сухую тканіну. Пазбягайце выкарыстання вадкіх ачышчальнікаў або растваральнікаў.
  • захоўванне: Калі корпус не выкарыстоўваецца, захоўвайце яго ў прахалодным, сухім месцы, удалечыні ад прамых сонечных прамянёў і экстрэмальных тэмператур.
  • Сыход за кабелем: Handle the USB cables carefully. Avoid sharp bends or excessive pulling to prevent damage.

Ліквідацыю непаладак

праблемаМагчымая прычынаРашэнне
Камп'ютар не распазнае корпус.
  • Слабае злучэнне кабеля.
  • SSD-назапашвальнік усталяваны няправільна.
  • SSD not initialized/formatted.
  • Няспраўны порт USB або кабель.
  • Пераканайцеся, што кабелі надзейна падключаны.
  • Re-open enclosure and verify SSD is seated correctly and screwed in.
  • Check Disk Management (Windows) or Disk Utility (macOS) to initialize and format the SSD.
  • Паспрабуйце іншы USB-порт або кабель.
Павольная хуткасць перадачы дадзеных.
  • Падключана да больш павольнага USB-порта (напрыклад, USB 2.0).
  • Thermal throttling due to high temperature.
  • Абмежаванні прадукцыйнасці SSD.
  • Connect to a USB 3.2 Gen 2 (10Gbps) compatible port.
  • Ensure thermal pads are correctly installed. Allow the enclosure to cool if it becomes excessively hot.
  • Verify your NVMe SSD's rated speed.
Enclosure gets very hot.
  • Звычайная праца падчас перадачы вялікіх аб'ёмаў дадзеных.
  • Ineffective thermal pad contact.
  • This is expected as the aluminum casinг рассейвае цяпло.
  • Ensure thermal pads are correctly positioned and making good contact with the SSD and enclosure.

Тэхнічныя характарыстыкі

АсаблівасцьДэталь
мадэльI9-Seal
МаркаДЖЭІ
Абсталяванне інтэрфейсуUSB 3.2 Gen 2 (USB-C)
Хуткасць перадачы даныхДа 10 Гбіт/с
Compatible SSD TypeNVMe M.2 (PCI-E M-Key)
Supported SSD Form Factor2280 (80mm) only
Максімальная ёмістасць захоўвання4 ТБ
Набор мікрасхемJMS583 A3
АсаблівасціUASP Support, TRIM Support, Win to Go (WTG) Support
МатэрыялАлюмініевы сплаў
КолерСерабро
Памеры прадукту4.06 х 1.02 х 0.39 цалі (103 х 26 х 10 мм)
Вага прадмета0.317 унцыі (9 грам)
Сумяшчальныя аперацыйныя сістэмыWindows, macOS, Linux, iOS, Android
Diagram of the JMS583 A3 master chip
Image: A detailed illustration of the JMS583 A3 master chip, which is integrated into the enclosure for stable and high-speed data transmission up to 10Gbps.

Гарантыя і падтрымка

For warranty information or technical support, please refer to the official JEYI website or contact their customer service directly. Details regarding specific warranty periods and support channels are typically provided with your purchase documentation or on the manufacturer's webсайт.

вытворца: ДЖЭІ

Webсайт: Visit the JEYI Store on Amazon

© 2025 JEYI. All rights reserved.