OOYCYOO P 60A

OOYCYOO MPPT 60A Solar Charge Controller User Manual

Model: P 60A

1. Уводзіны

This manual provides detailed instructions for the installation, operation, and maintenance of your OOYCYOO MPPT 60A Solar Charge Controller. This device is designed to efficiently manage power flow from your solar panels to your battery bank, ensuring optimal charging and system protection. It supports automatic 12V/24V system voltage identification and is compatible with various battery types.

Key features include a backlit LCD display, a 4-stage battery charging algorithm, and comprehensive protection functions.

2. Інструкцыі па тэхніцы бяспекі

Always connect the battery first, then the solar panel, and finally the load. Disconnect in reverse order.
Ensure all wiring is correctly polarized to prevent damage.
Do not connect inverters or inductive loads directly to the controller's load terminals.
Усталюйце кантролер у добра вентыляваным памяшканні, удалечыні ад лёгкаўзгаральных матэрыялаў.
The controller generates heat during operation; ensure adequate airflow. The integrated cooling fan activates when the temperature exceeds 45°C and turns off below 40°C.
Use appropriate circuit breakers and fuses for all connections.
This device is for indoor use only. Protect it from water and moisture.

3. Прадукт скончыўсяview

The OOYCYOO MPPT 60A Solar Charge Controller is designed for efficient solar power management. It features an LCD display for real-time data, multiple protection functions, and support for various battery types.

3.1 Змест пакета

1 x OOYCYOO MPPT 60A Solar Charge Controller
1 х датчык тэмпературы
1 х Кіраўніцтва карыстальніка (на англійскай мове)

3.2 Ідэнтыфікацыя кампанентаў

OOYCYOO MPPT 60A Solar Charge Controller with labeled components — Малюнак 1: Пярэдняя і бакавая часткі view of the OOYCYOO MPPT 60A Solar Charge Controller with key components labeled. Labels include LCD Display, 5S Reset button, Solar Panel Terminal, Battery Terminal, Load Terminal, USB 5V 2.4A ports, RS485 Communication Port, Remote Temp Sensor port, and Mounting Holes.

The controller features a clear LCD display on the front for monitoring system status. Below the display are control buttons for navigation and settings. Connection terminals for solar panels, battery, and load are located at the bottom. USB ports and an RS485 communication port are on the side.

4. Настройка і ўстаноўка

Proper installation is crucial for the safe and efficient operation of your solar charge controller. Follow these steps carefully.

4.1 Мантаж кантролера

Choose a dry, well-ventilated location, protected from direct sunlight, high temperatures, and water.
Пераканайцеся, што вакол кантролера дастаткова месца для адводу цяпла.
Mount the controller vertically on a wall or stable surface using the provided mounting holes.

4.2 Правадныя злучэнні

Follow the connection order precisely to avoid damage to the controller or other components.

Падключыце акумулятар: Connect the positive and negative terminals of the battery to the corresponding battery terminals on the controller. Ensure correct polarity. The controller will automatically detect the system voltage (12 В або 24 В).
Падключэнне сонечных панэляў: Connect the positive and negative leads from your solar panel array to the corresponding PV terminals on the controller. Ensure correct polarity. Do not exceed the maximum PV input voltagе 100В пастаяннага току.
Падключыце нагрузку (неабавязкова): Connect your DC loads to the load terminals on the controller. Note that the load output is for DC loads only. Do not connect inverters or inductive loads directly to these terminals.
Connect the Remote Temperature Sensor: Plug the temperature sensor into its dedicated port. This sensor helps the controller optimize charging based on battery temperature.

Wiring diagram for OOYCYOO MPPT 60A Solar Charge Controller — Figure 2: Illustrative wiring diagram showing connections for solar panels, battery, and DC load to the MPPT charge controller. The diagram also shows optional AC load connection via an inverter (not directly to the controller's load terminals).

Важная заўвага: Always connect the battery first and disconnect the solar panel last. Incorrect connection order can damage the controller.

5. Інструкцыя па эксплуатацыі

Once installed, the controller will begin operation automatically. The LCD display provides real-time system information.

5.1 ВК-дысплей і кнопкі

OOYCYOO MPPT 60A Solar Charge Controller LCD display — Figure 3: Close-up of the controller's backlit LCD display showing various parameters like PV voltagе, акумулятар абtage, load current, and charging status. Below the screen are four control buttons.

The backlit LCD displays critical system parameters such as PV voltagе, акумулятар абtage, charging current, load current, and accumulated energy (KWH). The four buttons below the display are used for navigation and settings adjustment:

Клавіша пераключэння: Used to cycle through display screens or confirm selections.
'+' (Plus) Key: Increases values or moves forward in menus.
'-' (Minus) Key: Decreases values or moves backward in menus.
Manual Switch Load Key: Toggles the load output on/off manually.
5S Reset: Націсніце і ўтрымлівайце 5 секунд, каб аднавіць заводскія налады.

5.2 Battery Charging Algorithm

The controller utilizes a 4-stage charging algorithm to optimize battery life and performance:

Навальная плата: Charges the battery at maximum current until the voltage дасягае павышэння абtage.
Павышаны зарад: Charges at a constant voltage for a set period to ensure full charge.
Плата за паплавок: Maintains the battery at a lower voltage to prevent self-discharge and overcharging.
Equalization (for specific battery types): Перыядычна перазараджае акумулятар, каб збалансаваць аб'ём элементаўtagі прадухіляюць сульфатацыю.

5.3 Падтрымліваемыя тыпы акумулятараў

The controller is compatible with various battery types, including:

Lead-Acid (Sealed, Gel, Flooded)
Літый (LFP)
User-defined parameters for other battery types.

Pre-set charging parameters are available for Sealed, Gel, Flooded, and LI (LFP) batteries. Users can customize parameters for other battery types as needed.

6. Функцыі абароны

The OOYCYOO MPPT 60A Solar Charge Controller incorporates multiple protection mechanisms to ensure system safety and longevity:

PV Overcurrent/Overpower Protection
PV Short Circuit Protection
PV Абарона ад зваротнай палярнасці
Reverse Charging at Night Protection
Абарона ад зваротнай палярнасці батарэі
Перагрузка батарэіtagе Абарона
Battery Over-discharge Protection
Battery Overtemperature Protection
Controller Overtemperature Protection
Lithium Battery Low Temperature Protection
Абарона ад кароткага замыкання нагрузкі
Абарона ад перагрузкі нагрузкі
TVS High Voltage Абарона ад пераходных працэсаў

OOYCYOO MPPT 60A Solar Charge Controller with protective function text — Figure 4: Image highlighting the protective functions of the MPPT Solar Controller, emphasizing its robust design for system safety.

7. Тэхнічнае абслугоўванне

Рэгулярнае тэхнічнае абслугоўванне забяспечвае аптымальную прадукцыйнасць і падаўжае тэрмін службы вашага кантролера сонечнай зарадкі.

Праверце злучэнні: Перыядычна правярайце ўсе злучэнні правадоў на надзейнасць і наяўнасць карозіі. Падцягвайце ўсе аслабленыя злучэнні.
Ачысціце кантролер: Keep the controller clean and free of dust. Use a dry cloth to wipe the exterior. Ensure ventilation openings are not obstructed.
Праверце на наяўнасць пашкоджанняў: Check for any signs of physical damage, overheating, or unusual odors.
Праверка батарэі: Follow the manufacturer's maintenance guidelines for your specific battery type.

8. Выпраўленне непаладак

У гэтым раздзеле разглядаюцца распаўсюджаныя праблемы, з якімі вы можаце сутыкнуцца пры выкарыстанні кантролера сонечнай зарадкі.

праблема	Магчымая прычына	Рашэнне
Controller not powering on / LCD blank	Акумулятар не падключаны або зарад батарэіtage too low. Reverse polarity connection.	Ensure battery is connected first and has sufficient voltage. Check battery polarity.
Няма зарадкі ад сонечных панэляў	Solar panels not connected or reverse polarity. Insufficient sunlight. PV voltage занадта нізкая або занадта высокая.	Check solar panel connections and polarity. Ensure adequate sunlight. Verify PV voltage is within operating range (e.g., 18V-96V for 12V system, 36V-96V for 24V system).
Загрузка не працуе	Load output disabled. Load short circuit or overload. Battery voltagе занадта нізка.	Check load output status on LCD. Disconnect load and check for short circuit. Ensure battery is sufficiently charged.
Перагрэў кантролера	Poor ventilation. Excessive load or charging current.	Ensure adequate airflow around the controller. Reduce load or charging current if possible.
Недакладны тtagэлектронныя паказанні	Loose connections. Faulty temperature sensor.	Check all wiring connections. Ensure temperature sensor is properly connected.

9. Тэхнічныя характарыстыкі

Technical specifications for the OOYCYOO MPPT 60A Solar Charge Controller.

Параметр	Каштоўнасць
Намінальны ток зарада	60А
Сістэма Voltage	12V/24V Auto Identification
Макс. PV Open Circuit Voltage	100 В пастаяннага току
Max. PV Input Power (12V System)	750 Вт
Max. PV Input Power (24V System)	1500 Вт
DC/DC Transfer Efficiency	да 98.7%
Працоўная тэмпература	-20℃ да +55℃
Памер тэрмінала	10 AWG
Памеры (ДШУ)	8.3 х 8.4 х 3.4 цалі (21.2 х 20.8 х 8.4 см)
Вага	3 фунтаў (1.28 кг)
Тып дысплея	Падсвятленне ВК
UPC	768461886785
Нумар мадэлі	П 60А

OOYCYOO MPPT 60A Solar Charge Controller with technical specifications table — Figure 5: Technical data table for the OOYCYOO MPPT 60A Solar Charge Controller, detailing system voltagе, адкрытая ланцуг абtage, and maximum power for solar panels.

OOYCYOO MPPT 60A Solar Charge Controller dimensions — Figure 6: Dimensional drawing of the OOYCYOO MPPT 60A Solar Charge Controller, showing its length, width, and depth in inches.

10. Гарантыя і падтрымка

For warranty information or technical support, please contact your retailer or the manufacturer directly. Refer to the product packaging or purchase documentation for specific contact details.