Кіраўніцтва карыстальніка нашыйніка для дрэсіроўкі сабак Saulcy C2

1. Уводзіны

Thank you for choosing the Saulcy C2 Dog Training Collar. This manual provides detailed instructions for the safe and effective use of your new training system. Please read this manual thoroughly before operation to ensure proper usage and to maximize the training benefits for your dog.

The Saulcy C2 Dog Training Collar is designed to assist in training dogs weighing 15-120 lbs, offering three adjustable training modes: Beep, Vibration (0-99 levels), and Static Shock (0-99 levels). Its IPX7 waterproof receiver and 1000ft remote range make it suitable for various training environments.

Image: A woman hugging a pug, surrounded by icons representing common dog behavioral issues such as biting, chewing, barking, digging, and jumping. This illustrates the types of behaviors the Saulcy C2 Dog Training Collar aims to help correct.

2. Прадукт скончыўсяview

2.1 Змест пакета

• Аддалены перадатчык
• Прыёмнік Каўнер
• Adjustable Nylon Strap
• USB-кабель для зарадкі
• Інструмент выпрабавання святла
• Contact Points (Short and Long)
• Silicone Caps for Contact Points
• Кіраўніцтва карыстальніка

2.2 Асноўныя магчымасці

• 3 Training Modes: Beep, Vibration (0-99 levels), and Static Shock (0-99 levels) for customized training.
• IPX7 Waterproof Receiver: Allows the receiver to be submerged in water up to 3.2 feet for 30 minutes, suitable for training in wet conditions.
• 1000ft Remote Range: Забяспечвае ample distance for effective outdoor training.
• Security Keypad Lock: Prevents accidental activation of static shock.
• Рэгуляваны каўнер: Fits dogs with neck girths from 8 to 27 inches, suitable for dogs weighing 15-120 lbs.
• Акумулятарныя батарэі: Long-lasting battery life for both remote (up to 90 days standby) and receiver (up to 30 days standby).

2.3 Дыяграма кампанентаў

Refer to the diagram below for an identification of the remote transmitter and receiver collar components.

Image: Detailed diagram illustrating the remote transmitter with LCD screen, buttons (Beep, Vibration, Shock, Power/Channel, Up/Down), security keypad lock, and USB charging port. The receiver collar is shown with contact points, USB charging port, On/Off button, and adjustable collar strap. Silicone caps are also depicted.

3. Інфармацыя па бяспецы

• Не для агрэсіўных сабак: Do not use this product on aggressive dogs. If your dog is aggressive, consult a professional dog trainer.
• Age and Weight: This collar is suitable for dogs over 6 months old and weighing between 15-120 lbs.
• Памер каўняра: Ensure the collar fits snugly but not too tightly. Two fingers should fit comfortably between the collar and your dog's neck.
• Час нашэння: Do not leave the collar on your dog for more than 12 hours per day. Prolonged wear can cause skin irritation.
• Skin Checks: Regularly check your dog's neck for signs of irritation, redness, or sores. If irritation occurs, discontinue use and consult a veterinarian.
• Статычны ўдар: Use static shock mode only as a last resort and at the lowest effective level. Always start with Beep or Vibration modes.
• Кантроль: Always supervise your dog during training sessions.
• Пазбягайце пашкоджанняў: Не спрабуйце разбіраць або рамантаваць прыладу самастойна. Гэта прывядзе да анулявання гарантыі.

4. Кіраўніцтва па наладцы

4.1 Зарадка прылад

1. Connect the USB charging cable to the charging ports on both the remote transmitter and the receiver collar.
2. Plug the USB cable into a standard USB power adapter (not included) or a computer USB port.
3. The battery indicator on the remote and receiver will show charging status. A full charge typically takes 2-3 hours.
4. Once fully charged, the battery indicator will show full. Disconnect the devices from the charger.

Note: The remote can standby for up to 90 days, and the receiver for up to 30 days on a full charge.

4.2 Pairing the Remote and Receiver

The remote and receiver are typically pre-paired from the factory. If they are not paired or you need to re-pair them:

1. Ensure both devices are fully charged and turned off.
2. Turn on the remote transmitter by pressing any button.
3. Press and hold the On/Off button on the receiver collar until the indicator light flashes rapidly.
4. Within 10 seconds, press the Beep or Vibration button on the remote. The receiver's indicator light will flash slowly, indicating successful pairing.
5. If pairing fails, repeat the steps.

4.3 Fitting the Receiver Collar

Proper fit is crucial for effectiveness and your dog's comfort.

Image: An illustration demonstrating the adjustable nature of the collar, suitable for dogs from 15 lbs to 120 lbs, with a neck girth of 8-27 inches. It also shows how to cut off excess strap and burn the end to prevent fraying.

1. Place the receiver collar around your dog's neck, ensuring the contact points are positioned underneath, making direct contact with the skin.
2. Adjust the strap so it is snug but not tight. You should be able to fit two fingers comfortably between the collar and your dog's neck.
3. If your dog has long fur, you may need to trim the fur around the contact points to ensure proper skin contact.
4. Select the appropriate length of contact points (short or long) based on your dog's fur length.
5. If the collar strap is too long, you can trim the excess and use a lighter to carefully singe the cut edge to prevent fraying.

5. Інструкцыя па эксплуатацыі

5.1 Уключэнне/выключэнне

• Пульт: Press any button to turn on. The LCD screen will illuminate. The remote will automatically enter standby mode after a period of inactivity.
• Прыёмнік: Press and hold the On/Off button on the receiver until the indicator light illuminates. To turn off, press and hold the On/Off button until the light extinguishes.

5.2 Selecting Training Modes and Levels

The remote offers Beep, Vibration, and Static Shock modes, each with adjustable intensity levels for Vibration and Static Shock.

Image: The remote control displaying its LCD screen and three main buttons for Beep, Vibration, and Shock modes. Icons for each mode are shown alongside a dog, emphasizing the three distinct training options.

1. Рэжым гукавога сігналу: Націсніце Гукавы сігнал (speaker icon) to deliver an audible tone to the receiver. This mode has no adjustable levels.
2. Рэжым вібрацыі: Націсніце Кнопка вібрацыі (wavy lines icon) to deliver a vibration. Use the Up/Down buttons on the side of the remote to adjust the vibration intensity from 00 to 99.
3. Рэжым статычнага ўдару: Націсніце Кнопка шоку (lightning bolt icon) to deliver a static correction. Use the Up/Down buttons on the side of the remote to adjust the shock intensity from 00 to 99.

Recommendation: Always start with the lowest effective level for Vibration and Static Shock.

5.3 Security Keypad Lock

The remote features a security keypad lock to prevent accidental static shock activation.

Image: A close-up of the remote control highlighting the security keypad lock switch on the side. The switch can be moved up to "Lock" or down to "Unlock" the static shock function, preventing unintended activation.

• Slide the lock switch on the side of the remote upwards to the "Lock" position to disable the static shock button.
• Slide the lock switch downwards to the "Unlock" position to enable the static shock button.

5.4 Training Tips

• Паслядоўнасць - гэта галоўнае: Use the collar consistently for specific behaviors you want to correct.
• Станоўчае падмацаванне: Always pair corrections with positive reinforcement when your dog performs the desired behavior.
• Кароткія сесіі: Keep training sessions short and positive (10-15 minutes).
• Start with Beep/Vibration: Begin training with the Beep or Vibration modes before introducing static shock.
• Observe Reactions: Pay close attention to your dog's reaction to each stimulation level. The goal is to get their attention, not to cause distress.

6. Тэхнічнае абслугоўванне

• Уборка: Regularly clean the receiver collar and contact points with a damp cloth. Ensure the devices are dry before charging.
• Сыход за батарэяй: Charge the devices fully before long periods of storage. Recharge every 3-4 months to maintain battery health.
• Праверка рамяня: Periodically inspect the collar strap for wear and tear. Replace if damaged.
• захоўванне: Store the collar and remote in a cool, dry place away from direct sunlight and extreme temperatures.

7. Выпраўленне непаладак

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка

Saulcy products are designed for durability and performance. For warranty information, technical support, or any questions regarding your Saulcy C2 Dog Training Collar, please contact our customer service team.

You can typically find contact information on the product packaging, the official Saulcy webсайт або праз вашу платформу для пакупак.

Калі ласка, захавайце доказы пакупкі для прэтэнзій па гарантыі.