waveshare WS-4.3inch DSI LCD

Waveshare 4.3-inch MIPI DSI LCD Capacitive Touch Display User Manual

Model: WS-4.3inch DSI LCD

1. Уводзіны

This manual provides detailed instructions for the Waveshare 4.3-inch MIPI DSI LCD Capacitive Touch Display. This display features an 800×480 IPS panel with a wide viewing angle and a 5-point capacitive touch interface. It is designed for seamless integration with various Raspberry Pi models and other single-board computers, offering a driver-free experience for supported operating systems.

2. Змест пакета

Праверце, ці ўсе пералічаныя ніжэй прадметы ўваходзяць у камплект. Калі якія-небудзь прадметы адсутнічаюць або пашкоджаныя, звярніцеся ў службу падтрымкі кліентаў.

Image showing the Waveshare 4.3-inch DSI LCD, FPC cables (15PIN 1.0 pitch 50mm and 160mm), DSI cable (12cm), and a screw pack.

Figure 2.1: Package Contents. This image displays the 4.3-inch DSI LCD, two FPC 15PIN 1.0 pitch cables (50mm and 160mm), one 12cm DSI cable, and a screw pack.

  • 4.3inch DSI LCD x1
  • FPC 15PIN 1.0 pitch 50mm (opposite sides) x1
  • FPC 15PIN 1.0 pitch 160mm (opposite sides) x1
  • DSI-Cable-12cm x1
  • Screwspack x1

3. Інструкцыі па ўсталёўцы

Follow these steps to connect your 4.3-inch DSI LCD to a compatible single-board computer, such as a Raspberry Pi.

  1. Prepare your Raspberry Pi: Ensure your Raspberry Pi is powered off before making any connections.
  2. Connect the DSI Cable: Carefully connect one end of the provided DSI cable to the DSI port on the 4.3-inch LCD. Connect the other end to the DSI port on your Raspberry Pi. Ensure the cable is inserted correctly and securely.
  3. Падключэнне сілкавання: The display typically draws power directly from the Raspberry Pi's DSI interface. No separate power supply is usually required for the display itself. Ensure your Raspberry Pi has an adequate power supply (e.g., 5V/3A or 5V/5A for Raspberry Pi 5).
  4. Мантаж (дадаткова): Use the provided screw pack to securely mount the display to your Raspberry Pi or an enclosure, if desired.
  5. Уключэнне: Once all connections are secure, power on your Raspberry Pi. The display should initialize automatically.

For most supported operating systems like Raspberry Pi OS, Ubuntu, Kali, and Retropie, the display operates driver-free. Refer to the connection examples below for visual guidance.

Diagrams showing the 4.3-inch DSI LCD connected to Raspberry Pi 5, Raspberry Pi 4, and Raspberry Pi 3B+.

Figure 3.1: Connection Examples. This image illustrates how to connect the DSI LCD to Raspberry Pi 5, Raspberry Pi 4, and Raspberry Pi 3B+ using the DSI cable.

4. Інструкцыя па эксплуатацыі

4.1 Display Functionality

The 4.3-inch DSI LCD provides an 800x480 resolution display with an IPS panel, ensuring wide viewing angles and consistent color reproduction. The display refreshes at up to 60Hz.

4.2 Capacitive Touch Control

The display features a capacitive touch panel that supports up to 5-point multi-touch, depending on the operating system. This allows for intuitive interaction with the graphical user interface of your connected device.

Image demonstrating touch control on the 4.3-inch DSI LCD, showing a finger interacting with the screen to select an option from a menu.

Figure 4.1: Touch Control. This image illustrates a user interacting with the display's capacitive touch screen to navigate a menu.

4.3 Backlight Brightness Control

The display supports software control of backlight brightness. Specific commands or settings for adjusting brightness will depend on the operating system and software environment running on your Raspberry Pi. Consult your operating system's documentation for details on backlight control.

5. Device & System Support

The Waveshare 4.3-inch DSI LCD is compatible with a range of single-board computers and operating systems:

Diagram showing compatibility with various Raspberry Pi models, VisionFive2, and Core3566, along with supported operating systems.

Figure 5.1: Device and System Support. This image details the compatibility of the display with different hardware platforms and their respective operating system support.

  • Маліна Пі: Compatible with Raspberry Pi 5/4B/3B+/3A+/3B/2B/B+/A+, CM3/3+/4*. Supports Raspberry Pi OS (5-point touch, driver free), Ubuntu/Kali/WIN10 IoT (single point touch, driver free), and Retropie (driver free).
    * CM3/3+/4 requires an extra adapter board.
  • VisionFive2: Supports Debian (single point touch, driver free).
  • Core3566: Supports Debian/Ubuntu (5-point touch, driver free).

6. Тэхнічнае абслугоўванне

Proper maintenance ensures the longevity and optimal performance of your display.

  • Уборка: Выкарыстоўвайце мяккую безворсовую тканіну, злёгку dampened with water or a screen-cleaning solution to clean the display surface. Avoid harsh chemicals, abrasive materials, or excessive moisture.
  • Апрацоўка: Handle the display by its edges. Avoid applying pressure to the screen surface, especially when connecting cables.
  • захоўванне: When not in use, store the display in a cool, dry environment, away from direct sunlight and extreme temperatures.
  • Кабельнае кіраванне: Ensure DSI and FPC cables are not bent sharply or under tension, as this can damage the cables or connectors.

7. Выпраўленне непаладак

If you encounter issues with your display, refer to the following troubleshooting tips:

  • Няма дысплея/пусты экран:
    • Ensure the DSI cable is securely connected to both the display and the Raspberry Pi.
    • Verify that your Raspberry Pi is powered on and functioning correctly.
    • Check if the Raspberry Pi's operating system is configured to output to the DSI display. For some systems, specific configuration might be needed, though it's generally driver-free.
    • Ensure the power supply for your Raspberry Pi is sufficient.
  • Сэнсарная функцыя не працуе:
    • Confirm that the DSI cable is properly connected, as it carries both display and touch data.
    • Verify that your operating system supports the touch functionality of the DSI display. While many are driver-free, ensure no conflicting drivers or settings are active.
    • Restart your Raspberry Pi.
  • Мігатлівы дысплей:
    • Check the DSI cable for any damage or loose connections.
    • Ensure the power supply to the Raspberry Pi is stable and adequate.

8. Тэхнічныя характарыстыкі

Key technical specifications for the Waveshare 4.3-inch DSI LCD Capacitive Touch Display:

Technical drawing showing the dimensions of the 4.3-inch DSI LCD in millimeters.

Figure 8.1: Appearance and Dimensions. This image provides a detailed technical drawing with measurements of the display module in millimeters.

АсаблівасцьСпецыфікацыя
Памер дысплея4.3 цаляў
дазвол800 × 480 пікселяў
Тып панэлі дысплеяIPS Wide Angle
ІнтэрфейсMIPI DSI
Сэнсарны тыпCapacitive, 5-point touch
Touch Panel MaterialTempered Glass (Hardness up to 6H)
Частата абнаўленняДа 60 Гц
Кіраванне падсветкайSoftware adjustable
Памеры прадукту0.35 x 4.17 x 2.68 цалі (прыблізна 8.89 x 105.9 x 68.07 мм)
Вага прадмета5.6 унцыі (прыблізна 158.76 грамаў)
Нумар мадэліWS-4.3inch DSI LCD

9. Гарантыя і падтрымка

For warranty information, technical support, or further assistance, please refer to the official Waveshare webсайт або звярніцеся да прадаўца. Захоўвайце чэк аб куплі для прэтэнзій па гарантыі.

© 2023 Waveshare. Усе правы абаронены.

Звязаныя дакументы - WS-4.3inch DSI LCD

прэview Waveshare 4.3-цалевы DSI LCD: ёмістны сэнсарны дысплей для Raspberry Pi
Азнаёмцеся з 4.3-цалевым DSI LCD Waveshare — ёмістным сэнсарным дысплеем IPS з дазволам 800x480, распрацаваным для Raspberry Pi. Ён мае інтэрфейс MIPI DSI, наладу без драйвераў і падсветку з праграмным кіраваннем.
прэview 5-цалевы DSI LCD Waveshare: Кіраўніцтва па сэнсарным дысплеі Raspberry Pi
Азнаёмцеся з 5-цалевым вадкакрысталічным дысплеем Waveshare DSI — ёмістным сэнсарным дысплеем для Raspberry Pi. У гэтым кіраўніцтве апісаны функцыі, падключэнне абсталявання, налада праграмнага забеспячэння, кіраванне падсветкай і ліквідацыя непаладак гэтага дысплея інтэрфейсу MIPI DSI.
прэview 4-цалевы ВК-дысплей Waveshare DSI для Raspberry Pi: налада і кіраўніцтва
Падрабязнае кіраўніцтва па 4-цалевым ВК-дысплеі Waveshare DSI, якое ахоплівае функцыі, падключэнне абсталявання, усталёўку праграмнага забеспячэння, паварот экрана, кіраванне падсветкай і ліквідацыю непаладак для Raspberry Pi.
прэview Waveshare 7inch DSI LCD (C) User Manual: Setup Guide for Raspberry Pi
Detailed user manual for the Waveshare 7inch DSI LCD (C), a 1024x600 IPS capacitive touch display for Raspberry Pi. Covers hardware connection and software setup for various Pi models and OS versions.
прэview Кіраўніцтва карыстальніка 10.1-цалевага HDMI LCD-дысплея Waveshare (G): налада, характарыстыкі і падключэнні
Азнаёмцеся з 10.1-цалевым HDMI-дысплеем Waveshare (G) з чахлом. Гэта кіраўніцтва карыстальніка ахоплівае асноўныя характарыстыкі, папярэджанні аб бяспецы, інструкцыі па падключэнні Raspberry Pi, Jetson Nano і ПК, а таксама адказвае на часта задаваныя пытанні.
прэview 5-цалевы круглы IPS LCD-дысплей Waveshare з дазволам 1080x1080 - кіраўніцтва карыстальніка
Азнаёмцеся з 5-цалевым круглым IPS-дысплеем Waveshare з дазволам 1080x1080. У гэтым кіраўніцтве падрабязна апісаны яго функцыі, характарыстыкі і налады для Raspberry Pi і ПК з Windows, у тым ліку каліброўка сэнсарнага экрана і падключэнне.