Інструкцыя па эксплуатацыі насценнага мацавання для тэлевізара PERLESMITH

Уводзіны

This manual provides detailed instructions for the safe and correct installation and operation of your PERLESMITH TV Wall Mounts, including the PSMTK1 Tilting Mount and the PSMFK7 Full Motion Mount. Please read all instructions carefully before beginning installation to ensure proper setup and to prevent damage or injury.

Важная інфармацыя па бяспецы

ПАПЯРЭДЖАННЕ: Failure to read and follow all instructions can result in personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer support.

• Do not install on drywall alone. The mount must be secured to a single wood stud, solid concrete, or brick wall.
• Пераканайцеся, што канструкцыя сцяны можа бяспечна вытрымаць сумарную вагу мацавання і тэлевізара.
• Always use an assistant for lifting and positioning the television.
• Do not exceed the maximum weight capacity specified for each mount model.
• Перыядычна правярайце ўсе злучэнні і крапежныя элементы, каб пераканацца ў іх надзейнасці.

Змест пакета

Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact PERLESMITH customer service.

PSMFK7 Full Motion TV Wall Mount Components

Image: The PSMFK7 full motion TV wall mount, showing the articulating arm, TV plate, wall plate, and small accessories like cable ties and a bubble level.

• Full Motion Wall Plate Assembly
• Кранштэйны для тэлевізара (x2)
• Mounting Hardware Kit (various screws, anchors, washers)
• Пузырьковый ўзровень
• Кабельныя сцяжкі

PSMTK1 Tilting TV Wall Mount Components

Image: The PSMTK1 tilting TV wall mount, showing the wall plate, TV brackets, and small accessories like cable ties and a bubble level.

• Tilting Wall Plate
• Кранштэйны для тэлевізара (x2)
• Mounting Hardware Kit (various screws, anchors, washers)
• Пузырьковый ўзровень
• Кабельныя сцяжкі

Настройка і ўстаноўка

1. Праверкі перад устаноўкай

1. Праверце сумяшчальнасць тэлевізара:
       For PSMFK7: Fits most 26"-55" TVs up to 70 lbs (31.8 kg) with VESA patterns from 100x100mm to 400x400mm.
       For PSMTK1: Fits most 23"-60" TVs up to 115 lbs (52 kg) with VESA patterns from 75x75mm to 400x400mm.
   

   Image: Visual guide for PSMFK7 compatibility, indicating TV size range, weight capacity, and VESA mounting patterns.
2. Вызначце тып сцяны: This mount is designed for installation on single wood studs, solid concrete, or brick walls. НЕ ўстанаўлівайце толькі на гіпсакардон.
3. Check for Cable Blockage: Ensure the TV's power and input ports will not be blocked by the mounting brackets.

2. Attaching TV Brackets to TV

1. Асцярожна пакладзеце тэлевізар экранам уніз на мяккую, чыстую паверхню.
2. Select the correct screws, washers, and spacers from the hardware kit that fit your TV's VESA mounting holes.
3. Attach the two TV brackets to the back of your TV using the selected hardware. Ensure the brackets are level and securely fastened.

3. Мантаж насценных пласцін

1. Determine the desired height for your TV. Mark the drilling locations on the wall.
2. For Wood Stud Installation: Use a stud finder to locate the center of a wood stud. Drill pilot holes (e.g., 7/32" or 5.5mm) at the marked locations. Secure the wall plate using lag bolts and washers.
3. For Concrete/Brick Wall Installation: Drill pilot holes (e.g., 3/8" or 10mm) at the marked locations. Insert concrete anchors into the holes. Secure the wall plate using lag bolts and washers.
4. Use the included bubble level to ensure the wall plate is perfectly horizontal before tightening all fasteners.

4. Mounting TV to Wall Plate

1. With an assistant, carefully lift the TV with the attached brackets.
2. Прымацуйце кранштэйны тэлевізара да насценнай пласціны. Пераканайцеся, што тэлевізар надзейна замацаваны на мацанні.
3. For PSMFK7: Замацуйце тэлевізар на мацанні з дапамогай прадугледжаных шруб бяспекі або фіксуючых механізмаў.
4. For PSMTK1: Engage the locking mechanism with the quick release pull-down straps to secure the TV.


Image: Simplified installation steps for the PSMTK1 mount, illustrating how the TV brackets hook onto the wall plate and the use of the pull cord for locking and releasing.

Operating Your TV Mount

PSMFK7 Full Motion Mount Adjustments

Image: Demonstrates the PSMFK7 mount's flexibility, including tilting down 15 degrees, extending up to 19.17 inches, swiveling 180 degrees, and leveling +/-3 degrees.

• Рэгуляванне нахілу: The mount features a +5°/-15° tilt range. Loosen the tilt knobs on the TV brackets, adjust the TV to the desired angle, and then tighten the knobs to secure.
• Рэгуляванне павароту: The articulating arm allows for a +/-90° swivel. Gently push or pull the TV to the desired viewкут нахілу.
• Падаўжэнне/Уцягванне: Extend the TV up to 19.17 inches (48.7 cm) from the wall for optimal viewing or retract it back to 3.2 inches (8.1 cm) for a low-profile глядзець.
• Рэгуляванне выраўноўвання: After installation, you can make a +/-3° leveling adjustment to ensure the TV is perfectly horizontal.

PSMTK1 Tilting Mount Adjustments

• Рэгуляванне нахілу: The PSMTK1 allows for a downward tilt. Loosen the tilt bolts on the side of the TV brackets, adjust the TV to the desired angle, and then tighten the bolts.
• Механізм блакавання: Use the pull-down straps to engage or disengage the quick-release locking mechanism, securing the TV to the wall plate.

Тэхнічнае абслугоўванне

• Periodically check all screws and bolts to ensure they are tight and secure.
• Clean the mount with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Ensure no cables are pinched or stressed by the mount's movement.

Ліквідацыю непаладак

• Тэлевізар не стаіць роўна: Use the leveling adjustment feature (PSMFK7) or re-adjust the tilt bolts (PSMTK1) and ensure the wall plate was installed level.
• Мацаванне адчуваецца свабодным: Re-check all wall plate and TV bracket fasteners. Ensure they are tightened securely. If installed on a wood stud, confirm the lag bolts are fully engaged in the stud. If on concrete, ensure anchors are properly seated.
• Difficulty moving full motion mount: Check for any obstructions. Ensure all pivot points are free of debris. If the movement is too stiff or too loose, some joints may have adjustable tension screws (refer to specific model diagrams if available).
• Адсутныя часткі: Do not proceed with installation. Contact PERLESMITH customer support for replacement parts.

Тэхнічныя характарыстыкі

Інфармацыя аб гарантыі

PERLESMITH products are manufactured with quality and care. For specific warranty details, please refer to the warranty card included with your product or visit the official PERLESMITH webсайт. Захоўвайце чэк аб куплі як пацверджанне пакупкі.

Падтрымка кліентаў

If you have any questions, require assistance with installation, or need replacement parts, please contact PERLESMITH customer support. Our team is available to help you.

• Webсайт: www.perlesmith.com (Hypothetical link, please replace with actual if available)
• электронная пошта: support@perlesmith.com (Hypothetical email, please replace with actual if available)
• тэлефон: 1-800-XXX-XXXX (Hypothetical number, please replace with actual if available)