Gearlux SP184 18 LED 10 Watt RGBW PAR Stage Кіраўніцтва карыстальніка Light

1. Уводзіны

This manual provides essential information for the safe and efficient operation of your Gearlux SP184 18 LED 10 Watt RGBW PAR Stage Light. Please read this manual thoroughly before installation and use, and retain it for future reference.

2. Інфармацыя па бяспецы

• Пераканайцеся, што аб'ём блока харчаванняtagе супадае з названым абtagе на прыладзе.
• Always disconnect the power before cleaning or servicing the unit.
• Не выкарыстоўвайце прыладу, калі шнур харчавання пашкоджаны.
• Пазбягайце прамога ўздзеяння на вочы крыніцы святла.
• This device is for indoor use only. Protect it from moisture and extreme temperatures.
• Забяспечце дастатковую вентыляцыю вакол прылады, каб прадухіліць перагрэў.

3. Прадукт скончыўсяview

3.1 Асноўныя магчымасці

• Quad-Color LEDs: Equipped with 18x10-watt RGBW (Red, Green, Blue, White) LEDs for versatile color mixing and high output.
• Эфектыўнае астуджэнне: Features a quiet cooling fan for effective heat dissipation, contributing to a longer product lifespan.
• RDM Functionality: Supports RDM (Remote Device Management) via 8 DMX channels for simplified configuration and control.
• Гнуткі мантаж: Includes an adjustable metal handle/bracket for easy installation on walls, trusses, or for ground placement.

3.2 Кампаненты

Familiarize yourself with the main components of the Gearlux SP184 PAR light:

Малюнак 1: Фронт view of the Gearlux SP184 PAR Stage Light, showing the 18 RGBW LED lenses.

Малюнак 2: Тыл view of the control panel, featuring DMX In/Out, Power In/Out, digital display, and control buttons.

• Святлодыёдны масіў: 18 individual 10-watt RGBW LEDs on the front panel.
• Панэль кіравання: Located on the rear, includes a digital display and four control buttons (MENU, UP, DOWN, ENTER).
• Злучэнні DMX: XLR 3-pin DMX In and DMX Out ports for linking with DMX controllers and other fixtures.
• Падключэнне да электрасілкавання: Power In and Power Out ports for daisy-chaining power to multiple units. Includes a fuse holder.
• Мантажны кранштэйн: An adjustable metal bracket for secure positioning.

4. Настройка і ўстаноўка

4.1 Распакаванне

Carefully remove the fixture from its packaging. Inspect the unit for any signs of damage during transit. Retain the packaging for future transport or storage.

4.2 Мантаж

The Gearlux SP184 can be mounted in various positions using its adjustable bracket:

• Падлогавае мацаванне: Place the unit on a stable, level surface. Adjust the bracket to direct the light as desired.
• Насценны мацаванне: Securely attach the bracket to a sturdy wall using appropriate hardware (not included). Ensure the mounting surface can support the weight of the fixture.
• Мацаванне фермы: Attach the bracket to a lighting truss using a suitable clamp (not included). Always use a safety cable when mounting overhead.

Малюнак 3: Збоку view illustrating the adjustable mounting bracket and knob for angle adjustment.

4.3 Падключэнне харчавання

Connect the provided power cable to the "Power In" port on the rear of the unit and then to a suitable power outlet (AC 100-240V, 50/60Hz). Multiple units can be daisy-chained using the "Power Out" port, but ensure the total current draw does not exceed the circuit's capacity.

Малюнак 4: Detail of the Power In port with a connected power cable.

4.4 Злучэнне DMX

For DMX control, connect a DMX cable from your DMX controller's output to the "DMX In" port of the first fixture. For multiple fixtures, connect the "DMX Out" of the first fixture to the "DMX In" of the next, and so on. Use a DMX terminator on the last fixture in the chain for optimal signal integrity.

5. Інструкцыя па эксплуатацыі

5.1 Навігацыя па панэлі кіравання

The digital display and four buttons on the rear panel allow you to navigate menus and select operating modes:

• МЕНЮ: Цыклічна пераключаецца паміж опцыямі галоўнага меню.
• УВЕРХ-УНІЗ: Navigates through sub-menu options or adjusts parameter values.
• УВОД: Confirms a selection or saves a setting.

Рэжымы працы 5.2

The Gearlux SP184 typically offers several operating modes:

• Рэжым DMX: Allows external control via a DMX controller. Set the DMX address for the fixture. The unit uses 8 DMX channels.
• Аўтаматычны рэжым: The fixture runs through pre-programmed light shows automatically.
• Актыўны рэжым гуку: The light reacts to sound detected by its built-in microphone.
• Рэжым Master/Slave: Link multiple units where one acts as the master (controlling) and others as slaves (following).
• Статычны каляровы рэжым: Select and display a single static color (Red, Green, Blue, White, or mixed colors).

Малюнак 5: The PAR light displaying a white output, demonstrating its RGBW capabilities.

Малюнак 6: The PAR light displaying a pink/magenta output, showcasing color mixing.

Малюнак 7: The PAR light displaying a green output.

5.3 RDM Function

The RDM (Remote Device Management) function allows for two-way communication between the DMX controller and the fixture. This enables remote setting of DMX addresses, mode changes, and monitoring of fixture status directly from an RDM-compatible DMX controller, simplifying setup and troubleshooting.

6. Тэхнічнае абслугоўванне

6.1 Ачыстка

To maintain optimal light output and cooling efficiency, regularly clean the fixture's lenses and cooling vents. Use a soft, lint-free cloth and a mild glass cleaner for the lenses. Ensure the unit is powered off and disconnected before cleaning.

6.2 Замена засцерагальніка

If the unit does not power on, check the fuse located near the power input. Disconnect power, unscrew the fuse holder, and replace the fuse with one of the same type and rating (e.g., T2A 250V). Never use a fuse with a higher rating.

6.3 Захоўванне

When not in use, store the fixture in its original packaging or a suitable case in a dry, dust-free environment.

7. Выпраўленне непаладак

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка

Каб атрымаць інфармацыю аб гарантыі або тэхнічную падтрымку, звярніцеся да дакументацыі, прадстаўленай пры куплі, або звярніцеся да прадаўца. Захоўвайце пацвярджэнне пакупкі для любых гарантыйных прэтэнзій.