DJI Mavic 3 Series 100W Battery Charging Hub Instruction Manual

1. Прадукт скончыўсяview

The DJI Mavic 3 Series 100W Battery Charging Hub is designed to enhance the charging efficiency for your DJI Mavic 3 Intelligent Flight Batteries. When connected to a designated charger, this hub expands the charging interface to accommodate up to three batteries. It features an intelligent design that charges batteries in sequence, prioritizing those with lower power levels to get you back in the air faster.

Асноўныя характарыстыкі:

• Three-Battery Charging: Expands charging capacity to three batteries simultaneously.
• Intelligent Sequential Charging: Prioritizes charging batteries with lower power levels first, optimizing efficiency.
• Сумяшчальнасць: Designed for DJI Mavic 3 Intelligent Flight Battery, DJI 100W USB-C Power Adapter, DJI 65W Portable Charger, and DJI 65W Car Charger.
• Кампактны дызайн: Лёгкі і партатыўны для зручнай транспарціроўкі.

Figure 1: The DJI Mavic 3 Series 100W Battery Charging Hub, a compact device designed to charge up to three drone batteries.

2. Інструкцыі па ўсталёўцы

Before using your DJI Mavic 3 Series 100W Battery Charging Hub, ensure you have a compatible power adapter. The charging hub itself does not include a charger.

1. Распакуйце хаб: Carefully remove the charging hub from its packaging.
2. Prepare Power Adapter: Connect your compatible DJI 100W USB-C Power Adapter, DJI 65W Portable Charger, or DJI 65W Car Charger to a power source.
3. Connect Charging Hub: Plug the USB-C cable from your power adapter into the USB-C port on the side of the charging hub.
4. Устаўце батарэі: Gently slide up to three DJI Mavic 3 Intelligent Flight Batteries into the designated slots on the charging hub. Ensure they are securely seated.

Figure 2: The charging hub with two DJI Mavic 3 Intelligent Flight Batteries inserted, ready for charging. Note the USB-C port for connecting the power adapter.

3. Інструкцыя па эксплуатацыі

The DJI Mavic 3 Series 100W Battery Charging Hub operates with intelligent sequential charging to maximize efficiency.

1. Пачатковая аплата: Once batteries are inserted and the hub is connected to a power source, the hub will automatically begin charging.
2. Sequential Charging: The hub will assess the charge level of all inserted batteries and prioritize charging the battery with the lowest remaining power first. Once that battery is fully charged, it will proceed to charge the next battery with the lowest power, and so on, until all batteries are fully charged.
3. Monitoring Charge Status: Refer to the battery's LED indicators to monitor its individual charging progress. The hub itself may also have indicators (check product-specific documentation for details).
4. Час зарадкі: Charging times will vary depending on the power adapter used (e.g., 100W vs. 65W) and the initial charge level of the batteries. A 100W adapter will provide faster charging.

Важныя меркаванні:

• Always use DJI-approved power adapters for optimal performance and safety.
• The charging hub may become warm during operation, which is normal.
• Do not attempt to charge non-compatible batteries with this hub.

4. Тэхнічнае абслугоўванне

Proper maintenance ensures the longevity and optimal performance of your charging hub.

• Уборка: Use a soft, dry cloth to wipe the surface of the charging hub. Do not use liquid cleaners or solvents.
• захоўванне: Захоўвайце зарадны хаб у прахалодным, сухім месцы, удалечыні ад прамых сонечных прамянёў і экстрэмальных тэмператур, калі ён не выкарыстоўваецца.
• агляд: Periodically inspect the USB-C port and battery contacts for any signs of damage or debris.
• Пазбягайце вільгаці: Keep the charging hub away from water and other liquids to prevent damage.

5. Выпраўленне непаладак

Калі ў вас узніклі праблемы з зарадным цэнтрам, звярніцеся да наступных распаўсюджаных рашэнняў:

• Hub Not Charging:
  • Ensure the power adapter is properly connected to both the power source and the charging hub.
  • Праверце, ці адаптар сілкавання працуе належным чынам.
  • Check if the batteries are correctly inserted into the hub slots.
• Павольная зарадка:
  • Confirm that you are using a compatible and sufficiently powerful charger (e.g., 100W for fastest charging).
  • Ensure the USB-C cable is not damaged and is fully inserted.
• Батарэя не распазнаецца:
  • Remove and re-insert the battery to ensure proper contact.
  • Check for any debris or damage on the battery contacts or within the hub slots.

If the issue persists, please contact DJI customer support for further assistance.

6. Тэхнічныя характарыстыкі

7. Гарантыя і падтрымка

Інфармацыя аб гарантыі:

The DJI Mavic 3 Series 100W Battery Charging Hub is covered by the standard DJI Warranty. For specific terms and conditions, please refer to the official DJI warranty policy provided with your product or visit the official DJI webсайт.

Падтрымка кліентаў:

For technical assistance, troubleshooting, or warranty claims, please contact DJI customer support through their official website or the contact information provided in your product packaging. Ensure you have your product model number (CP.EN.00000422.01) and proof of purchase available when contacting support.