Hudson Valley Lighting 3060-BLNK

Hudson Valley Lighting Jonas LED Island Pendant Instruction Manual

Model: 3060-BLNK

1. Уводзіны

Дзякуй за пакупкуasing the Hudson Valley Lighting Jonas LED Island Pendant. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The Jonas pendant features a modern design with a Black Nickel finish, integrated LED lighting, and is suitable for damp locations. Its dimensions are 60 inches in length, 5.5 inches in width, and 10.5 inches in height.

Hudson Valley Lighting Jonas LED Island Pendant in Black Nickel finish

Image 1.1: Hudson Valley Lighting Jonas LED Island Pendant. This image shows the full pendant light fixture with its sleek, linear design and Black Nickel finish.

2. Інфармацыя па бяспецы

ПАПЯРЭДЖАННЕ: To avoid the risk of electric shock, always disconnect power at the main circuit breaker or fuse box before beginning installation or performing any maintenance. Ensure the power is off before touching any electrical components.

  • Усе электрычныя падключэнні павінны адпавядаць мясцовым нормам, пастановам або Нацыянальнаму электрычнаму кодэксу (NEC). Звярніцеся да кваліфікаванага электрыка, калі вы не знаёмыя з правільнымі падключэннямі электрычнай праводкі.
  • This fixture is designed for 120-volt electrical systems.
  • Do not install this fixture in areas exposed to direct water spray or submersion. It is rated for damp толькі месцы.
  • Handle the fixture with care. The shade material is glass, which can break if dropped or mishandled.
  • Прапанова 65 Папярэджанне: Гэты прадукт можа ўтрымліваць хімічныя рэчывы, якія, як вядома ў штаце Каліфорнія, выклікаюць рак і прыроджаныя дэфекты або іншыя пашкоджанні рэпрадуктыўнай сістэмы. Вымыць рукі пасля працы.

3. Змесціва ўпакоўкі

Carefully unpack your fixture and check that all parts are included. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer service for assistance.

  • Jonas LED Island Pendant Fixture
  • Mounting Hardware (canopy, mounting plate, screws, wire nuts)
  • Інструкцыя па эксплуатацыі (гэты дакумент)
  • Remote Control (for operation)

4. Настройка і ўстаноўка

Неабходныя інструменты (не ўваходзяць у камплект): Phillips screwdriver, flathead screwdriver, wire strippers, electrical tape, safety glasses, ladder.

Патрабуецца зборка: Yes. Professional installation by a qualified electrician is recommended for safety and proper functionality.

  1. Выключыць харчаванне: Locate the circuit breaker controlling the power to the installation location and turn it off. Verify power is off using a voltagэлектронны тэстар.
  2. Падрыхтоўка мантажу: Attach the mounting plate to the junction box in the ceiling using the provided screws. Ensure the plate is securely fastened.
  3. Адрэгуляваць вышыню: Determine the desired hanging height for the pendant. The fixture has an adjustable suspension system. Adjust the length of the suspension rods or wires as needed before wiring.
  4. Правадныя злучэнні: Connect the fixture's electrical wires to the corresponding wires from the junction box.
    • Падключыце чорны прыстасаванне дроту да ст чорны (hot) supply wire.
    • Падключыце белы прыстасаванне дроту да ст белы (нейтральны) провад харчавання.
    • Падключыце зялёная або голая медзь зазямляльны провад прыстасавання да зялёная або голая медзь (зазямляльны) провад харчавання.
    Замацуйце ўсе злучэнні дроцянымі гайкамі і абматайце ізаляцыйнай стужкай для дадатковай бяспекі.
  5. Мацаванне: Carefully push the wired connections into the junction box. Align the fixture canopy with the mounting plate and secure it using the provided screws. Ensure no wires are pinched during this step.
  6. Аднавіць сілу: Пасля таго, як прыбор будзе надзейна ўсталяваны, аднавіце электразабеспячэнне з дапамогай аўтаматычнага выключальніка.
Diagram of pendant light mounting hardware

Малюнак 4.1: Прыкладample of mounting hardware for a pendant light. This image illustrates typical components like the mounting plate and canopy used for ceiling installation.

5. Інструкцыя па эксплуатацыі

The Hudson Valley Lighting Jonas LED Island Pendant is controlled via a remote control. Ensure the remote control has working batteries (not included, typically AAA or CR2032 type) before use.

  1. Уключэнне/выключэнне харчавання: Press the 'ON' button on the remote to turn the light on. Press the 'OFF' button to turn the light off.
  2. Зацямненне: If your remote control includes dimming functions, use the '+' and '-' buttons to adjust the brightness level of the LED light.
  3. Pairing Remote (if necessary): If the fixture does not respond to the remote, you may need to pair it. Refer to the specific remote control instructions for pairing procedures, which typically involve turning the fixture power off and on, then pressing a pairing button on the remote within a short timeframe.

6. Тэхнічнае абслугоўванне

Regular maintenance will help preserve the appearance and functionality of your Jonas LED Island Pendant.

  • Уборка: Адключыце электрычнасць перад чысткай. Выкарыстоўвайце мяккую, сухую або злёгку змочаную губку.amp cloth to wipe the exterior surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or electrical components.
  • Святлодыёдная крыніца святла: This fixture uses an integrated LED light source. The LEDs are designed for long life and are not user-replaceable. If the LED light source fails, the entire fixture may need to be replaced. Contact customer support for assistance.
  • агляд: Перыядычна правярайце ўсе злучэнні і мацавальныя элементы, каб пераканацца ў іх надзейнасці.

7. Выпраўленне непаладак

If you experience issues with your fixture, refer to the following troubleshooting guide:

праблемаМагчымая прычынаРашэнне
Святло не ўключаецца.Няма харчавання на свяцільні.Check circuit breaker or fuse. Ensure wall switch (if any) is on.
Няшчыльныя правадныя злучэнні.Turn off power at the breaker. Check all wire connections inside the canopy.
Remote control batteries are dead or remote is not paired.Replace remote batteries. Refer to Section 5 for remote pairing instructions.
Святло нечакана мігціць або цьмянее.Няшчыльныя правадныя злучэнні.Turn off power at the breaker. Check all wire connections.
Несумяшчальны рэгулятар яркасці святла (калі ёсць).Ensure a compatible LED dimmer switch is used. Consult a qualified electrician.

If the problem persists after attempting these solutions, contact a qualified electrician or Hudson Valley Lighting customer support.

8. Тэхнічныя характарыстыкі

АсаблівасцьДэталь
МаркаАсвятленне даліны Гудзона
Назва мадэліЁнас
Нумар мадэлі3060-BLNK
Колер аздабленняЧорны нікель
МатэрыялBrass, Alloy Steel, Iron, Glass
Памеры прадукту60 см Д х 5.5 см Ш х 10.5 см В
Тып крыніцы святлаУбудаваны святлодыёд
Колькасць крыніц святла1
Ватtage26 ват
Яркасць1122 люмен
Каляровая тэмпература3000 кельвінаў (цёплы белы)
CRI90
тtage120 вольт
Рэйтынг вільготнасціDamp Ацэнены
Тып ўстаноўкіНапалову ўтопленае мацаванне
Метад кантролюДыстанцыйнае
Вага прадмета11.9 фунта
UPC806134084103

9. Гарантыя і падтрымка

This Hudson Valley Lighting fixture comes with a manufacturer's warranty. For specific details regarding warranty coverage and duration, please refer to the warranty information provided at the time of purchase or contact Hudson Valley Lighting directly.

For technical assistance, missing parts, or warranty claims, please contact Hudson Valley Lighting customer support. Have your model number (3060-BLNK) and proof of purchase ready when contacting support.

Hudson Valley Lighting Contact Information:
Please visit the official Hudson Valley Lighting website for the most current contact details, including phone numbers and support email addresses.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.