Waveshare 5G Dongle Module USB 3.1 Adapter with Quad Antennas and Heatsink - User Manual

1. Уводзіны

This manual provides instructions for the Waveshare 5G Dongle Module, an adapter designed to integrate 5G modules with M.2 (NGFF) Key B interface into various host devices via a USB 3.1 Type A port. It includes quad antennas and an aluminum alloy heatsink for optimal performance and heat dissipation. Please note that the 5G module itself is not included and must be purchased separately.

Малюнак 1: Закончанаview of the Waveshare 5G Dongle Module components.

2. Асаблівасці

• Supports 5G modules with M.2 (NGFF) Key B interface, compatible with SIMCom and Quectel 5G modules.
• Supports 5G modules with 3042/3052 form factor, such as SIM82XX and RM50XQ series 5G modules.
• USB 3.1 Type A port for connecting to PC, Raspberry Pi, or Jetson Nano host boards to enable high-speed 5G network access.
• Includes 4x SMA antenna connectors for easy antenna installation.
• Onboard SIM card slot for Nano SIM cards.
• Onboard power and network indicators, with multiple reserved pads, for checking module operating status and testing other functions.
• PCB ENIG process, with reserved multi-slots and positioning holes for integration.
• Comes with a customized aluminum alloy heatsink for effective heat dissipation, protection, and durability.

Figure 2: Key features and compatibility overview.

3. Настройка і ўстаноўка

3.1 Package Contents Verification

Перад тым, як працягнуць усталёўку, пераканайцеся, што ўсе кампаненты прысутнічаюць у камплекце:

• Waveshare USB TO M.2 B KEY board
• Aluminum alloy heatsink
• Quad antennas
• USB 3.1 Type A cable (with auxiliary power option)
• SMA to IPEX adapter cables (for antenna connection)
• Screws and thermal pads

Note: A 5G module (e.g., SIMCom, Quectel) is NOT included and must be purchased separately.

3.2 Зборка модуля

1. Install the 5G Module: Carefully insert your compatible 5G module (3042/3052 form factor) into the M.2 Key B slot on the Waveshare board. Secure it with the provided screws.
2. Apply Thermal Pad and Heatsink: Place the thermal pad onto the 5G module. Then, attach the aluminum alloy heatsink over the 5G module and secure it to the Waveshare board using the appropriate screws. Ensure good contact for effective heat dissipation.
3. Падключыце антэны: Connect the SMA to IPEX adapter cables to the 5G module's antenna ports and the SMA connectors on the Waveshare board. Then, screw the quad antennas onto the SMA connectors.
4. Insert Nano SIM Card: Locate the Nano SIM card slot on the board and insert your activated Nano SIM card.

Figure 3: Fully assembled 5G Dongle Module with antennas and heatsink.

3.3 Connecting to a Host Device

Connect the assembled 5G Dongle Module to your host device (PC, Raspberry Pi, Jetson Nano) using the provided USB 3.1 Type A cable. If your 5G module has high power consumption, use the auxiliary power supply cable by connecting both USB male ports to your host device or a suitable power source.

Малюнак 4: Злучэнне examples with various host devices.

Figure 5: USB cable with auxiliary power for high-power 5G modules.

4. Інструкцыя па эксплуатацыі

4.1 Сумяшчальнасць сістэмы

The Waveshare 5G Dongle Module supports Windows and Linux operating systems. After connecting the module, your system should detect the new hardware.

4.2 Ўстаноўка драйвера

Depending on your specific 5G module and operating system, you may need to install drivers. Refer to the documentation provided with your 5G module or visit the Waveshare official website for driver downloads and detailed setup guides for your specific module and OS combination.

4.3 Сеткавае падключэнне

Once drivers are installed and the module is recognized, configure your network settings according to your operating system's instructions to establish a 5G network connection. The onboard power and network indicators will provide visual feedback on the module's operational status.

Figure 6: Multi-system support and heatsink function.

5. Тэхнічнае абслугоўванне

The Waveshare 5G Dongle Module is designed for durability. To ensure its longevity and optimal performance:

• Трымайце прыладу чыстай і без пылу. Выкарыстоўвайце для чысткі мяккую сухую тканіну.
• Пазбягайце ўздзеяння на модуль экстрэмальных тэмператур, вільготнасці або прамых сонечных прамянёў.
• Ensure the heatsink remains clear of obstructions to allow for proper airflow and heat dissipation.
• Handle the module and its components with care to prevent physical damage to connectors or the PCB.

6. Выпраўленне непаладак

6.1 Module Not Recognized by Host Device

• Праверце злучэнні: Ensure the USB cable is securely connected to both the dongle and the host device.
• Дапаможная сіла: If using a high-power 5G module, ensure the auxiliary power USB cable is also connected to provide sufficient power.
• Ўстаноўка драйвера: Verify that the correct drivers for your specific 5G module are installed on your operating system. Refer to the 5G module manufacturer's website or Waveshare's support resources.
• Месцаў у модулі: Ensure the 5G module is correctly seated in the M.2 Key B slot and secured.

6.2 Праблемы з перагрэвам

• Ўстаноўка радыятара: Confirm the aluminum alloy heatsink is properly installed with the thermal pad making good contact with the 5G module.
• Паток паветра: Ensure the heatsink is not obstructed and has adequate airflow.
• крыніца харчавання: Insufficient power can sometimes lead to instability and heat. Use the auxiliary power cable if needed.

6.3 No Network Signal

• Злучэнні антэны: Verify that all four antennas are securely connected to the SMA connectors and that the IPEX cables are properly attached to the 5G module.
• SIM-карта: Ensure the Nano SIM card is correctly inserted and activated with a valid data plan.
• 5G Module Compatibility: Confirm that your 5G module is compatible with the network bands available in your region.
• Канфігурацыя праграмнага забеспячэння: Check your operating system's network settings and the 5G module's software for correct APN settings and network selection.

6.4 Адсутныя або пашкоджаныя дэталі

If you find any parts missing or damaged upon arrival, please contact your vendor or Waveshare support immediately for assistance.

7. Тэхнічныя характарыстыкі

Figure 7: Detailed table of compatible 5G modules and their specifications.

Figure 8: Multiple size compatibility for M.2 modules.

8. Гарантыя і падтрымка

Specific warranty information for the Waveshare 5G Dongle Module is not provided in this document. For warranty details, technical support, or further assistance, please refer to the official Waveshare webсайт або звярніцеся непасрэдна ў службу падтрымкі кліентаў. Захоўвайце чэк аб куплі для прэтэнзій па гарантыі.