Yaheetech Model 592495 Dining Chairs (Set of 6) Instruction Manual

1. Уводзіны

Thank you for choosing Yaheetech Dining Chairs. This manual provides detailed instructions for the proper assembly, safe use, and effective maintenance of your new dining chairs. Please read this manual thoroughly before assembly and retain it for future reference.

2. Інфармацыя па бяспецы

• Не стаяць на крэсле. Standing on the chair can lead to instability and potential injury.
• The maximum weight capacity for each dining chair is 136 кг (300 фунта). Exceeding this limit may compromise the chair's structural integrity and safety.
• Ensure all screws and bolts are securely tightened before use. Periodically check and re-tighten fasteners as needed.
• Трымайце дробныя дэталі і ўпаковачныя матэрыялы далей ад дзяцей, каб прадухіліць небяспеку ўдушша.
• Assemble the chairs on a soft, clean surface to prevent scratching the product or your floor.

3. Змесціва ўпакоўкі

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact Yaheetech customer support.

• Dining Chair Backrest (6 units)
• Dining Chair Seat (6 units)
• Пярэднія лапы (6 пары)
• Заднія лапы (6 пары)
• Набор фурнітуры (шрубы, шайбы, шасцігранны ключ)
• Кіраўніцтва карыстальніка (гэты дакумент)

Малюнак 3.1: Закончанаview of six Yaheetech dining chairs.

4. Інструкцыя па зборцы

Assembly typically requires one person and approximately 15-20 minutes per chair. An Allen wrench is included in the hardware pack.

1. Прымацаваць ножкі да сядзення: Carefully align the chair legs with the pre-drilled holes on the underside of the chair seat. Insert the screws with washers and hand-tighten them initially.
2. Прымацаваць спінку: Connect the backrest to the seat frame, ensuring proper alignment. Insert screws and washers, hand-tightening them.
3. Balance and Tighten: Once all components are loosely assembled, stand the chair upright on a flat, level surface. Gently apply pressure to the seat to ensure all legs are balanced and touching the floor evenly. Then, securely tighten all screws using the provided Allen wrench. Do not overtighten.
4. Адрэгулюйце накладкі на ступні: The front legs are equipped with adjustable foot pads. Rotate these pads to fine-tune the chair's stability and prevent wobbling on uneven floors.

Figure 4.1: Visual guide for chair assembly steps.

Малюнак 4.2: падрабязна view of chair components and features.

5. Інструкцыя па выкарыстанні

These dining chairs are designed for indoor use in dining rooms, kitchens, living rooms, and similar environments. Ensure the chair is placed on a stable, level surface before sitting. The ergonomically curved backrest is designed to provide comfortable support during use.

Figure 5.1: Yaheetech dining chairs in a kitchen environment.

6. Тэхнічнае абслугоўванне

To maintain the appearance and longevity of your Yaheetech dining chairs, follow these care instructions:

• Уборка: Выцерці мяккай, damp cloth. Avoid harsh chemicals or abrasive cleaners, as these can damage the fabric and wood finish.
• Разлівы: Неадкладна прамакніце разлітыя рэчывы чыстай сухой анучай. Не расцірайце, бо гэта можа распаўсюдзіць пляму.
• сонечнае святло: Пазбягайце працяглага знаходжання пад прамымі сонечнымі прамянямі, каб прадухіліць выцвітанне тканіны.
• агляд: Periodically inspect all fasteners and re-tighten if necessary to ensure stability.

7. Выпраўленне непаладак

Калі ў вас узнікнуць якія-небудзь праблемы з абедзеннымі крэсламі, звярніцеся да наступных распаўсюджаных рашэнняў:

• Хістанне крэсла: Check if all legs are evenly touching the floor. Adjust the foot pads on the front legs by rotating them until the chair is stable. Ensure all assembly screws are securely tightened.
• Loose Nailhead Trims: If any decorative nailhead trims become loose, gently push them back into place. If they continue to loosen, a small amount of fabric adhesive can be used to secure them.
• Пісклівыя гукі: Squeaking can often be resolved by re-tightening all assembly screws. If the issue persists, disassemble and reassemble the chair, ensuring all parts are correctly aligned.

8. Тэхнічныя характарыстыкі

Figure 8.1: Detailed dimensions of the dining chair.

9. Гарантыя і падтрымка

For warranty information, missing parts, or any product-related inquiries, please contact Yaheetech customer support directly. Refer to your purchase documentation or the Yaheetech official webсайт для кантактных дадзеных.

вытворца: Yaheetech