MOUNTUP MU2007 Gas Spring Monitor Wall Mount Instruction Manual

1. Уводзіны

This manual provides detailed instructions for the installation, operation, and maintenance of your MOUNTUP MU2007 Gas Spring Monitor Wall Mount. Please read this manual thoroughly before installation to ensure correct setup and safe use. Retain this manual for future reference.

2. Інфармацыя па бяспецы

• Ёмістасць вагі: Do not exceed the maximum weight capacity of 17.6 lbs (8 kg). Exceeding this limit may result in serious injury or product damage.
• Памер экрана: This mount is designed for monitors between 17 and 32 inches.
• Тып сцяны: This mount is designed for installation on wood studs, concrete walls, or brick walls. НЕ МАНТАЖУЙЦЕ ТОЛЬКІ НА ГІПСАКАРТОН. Ensure the mounting surface can safely support the combined weight of the mount and your monitor.
• Сумяшчальнасць VESA: Ensure your monitor has VESA mounting patterns of 75x75mm or 100x100mm. If your monitor has a different VESA pattern, a VESA adapter (not included) may be required.
• Прафесійная ўстаноўка: Калі вы не ўпэўненыя ў працэсе ўстаноўкі або прыдатнасці вашай сцяны, звярніцеся да кваліфікаванага спецыяліста.
• Рухомыя часткі: The gas spring arm contains moving parts. Exercise caution during adjustment to avoid pinching or injury.

3. Змесціва ўпакоўкі

Please verify that all components are present and undamaged before beginning installation. Refer to the included hardware bag for specific part identification.

выява: Выбухнуў view of the monitor mount components, including the gas spring arm, wall plate, VESA plate, and various covers and fasteners.

4. Тэхнічныя характарыстыкі

5. Праверка сумяшчальнасці

Before installation, confirm your monitor and wall meet the following criteria:

• Памер манітора: Your monitor screen size should be between 17 and 32 inches.
• Вага манітора: Your monitor must weigh between 4.4 lbs (2 kg) and 17.6 lbs (8 kg).
• Шаблон VESA: Check the back of your monitor for a 75x75mm or 100x100mm square hole pattern.
• Тып сцяны: The mount must be installed on a solid wood stud, concrete wall, or brick wall. Drywall alone is not sufficient.

выява: Visual guide for checking monitor size (17"-32"), load capacity (4.4-17.6 lbs), and VESA pattern (75x75mm/100x100mm).

выява: Illustration of compatible wall types: wood stud, concrete wall, and brick wall. A warning indicates not to use anchors on drywall or wood, implying direct mounting to studs or using appropriate anchors for masonry.

6. Настройка і ўстаноўка

Для бяспечнай усталёўкі ўважліва выконвайце гэтыя дзеянні.

6.1 Attaching the VESA Plate to Your Monitor

1. Carefully place your monitor face down on a soft, clean surface to prevent scratches.
2. Align the VESA plate with the mounting holes on the back of your monitor.
3. Secure the VESA plate using the appropriate screws and washers provided in the hardware kit. Do not overtighten.

выява: The VESA mounting plate being secured to the back of a monitor with screws, indicating the initial step of preparing the monitor for attachment to the arm.

6.2 Мантаж насценнай пласціны

Важна: Use a stud finder to locate a wood stud, or ensure you have the correct masonry anchors for concrete/brick walls. A built-in level on the wall plate assists with alignment.

1. Determine the desired height and position for your monitor.
2. Hold the wall plate against the wall at the chosen location. Use the integrated bubble level to ensure it is perfectly horizontal.
3. Адзначце кропкі свідравання праз адтуліны на насценнай пласціне.
4. Drill pilot holes according to the instructions for your specific wall type (wood stud, concrete, or brick).
5. Attach the wall plate securely to the wall using the provided lag bolts for wood studs or appropriate anchors and bolts for masonry.

выява: Буйны план view of the wall mounting plate, highlighting the integrated bubble level for accurate horizontal alignment during installation.

6.3 Attaching the Monitor Arm to the Wall Plate

1. Slide the monitor arm assembly onto the wall plate.
2. Secure the arm to the wall plate using the designated fasteners.

6.4 Attaching the Monitor to the Arm

1. With assistance, carefully lift the monitor (with the VESA plate attached) and slide it onto the VESA head of the arm.
2. Secure the monitor to the arm using the thumb screw or other locking mechanism.

7. Інструкцыя па эксплуатацыі (рэгуляванне)

The MOUNTUP MU2007 offers a full range of motion for optimal viewз камфортам.

7.1 Gas Spring Adjustment (Monitor Weight)

The gas spring tension needs to be adjusted to match your monitor's weight for smooth movement and stable positioning. If the monitor rises too easily or drops, adjust the tension.

• Monitor Raises Up (too light): Turn the adjustment screw clockwise ("-" direction) to reduce tension for a lighter monitor.
• Monitor Drops Down (too heavy): Turn the adjustment screw counter-clockwise ("+" direction) to increase tension for a heavier monitor.

Заўвага: When adjusting gas spring tension, hold the arm in a horizontal position. The number of turns depends on the display's weight; it may take up to 17 turns to find the correct tension.

7.2 Tilt Angle Adjustment

Adjust the monitor's vertical angle for optimal viewінж.

1. Loosen the tilting bolt (turn to "-" direction).
2. Adjust the monitor to your desired angle (+90° / -45°).
3. Retighten the tilting bolt (turn to "+" direction) to secure the position.

выява: Detailed instructions for adjusting the gas spring tension (clockwise for lighter monitors, counter-clockwise for heavier monitors) and the tilt angle (loosen, adjust, retighten bolt).

7.3 Паварот (пейзажны/партрэтны)

The monitor can be rotated 360° to switch between landscape and portrait orientations.

выява: A monitor shown rotating 360 degrees, illustrating the ability to switch between landscape and portrait orientations.

7.4 Swivel and Extension

The arm allows for 180° swivel at the wall plate and 270° at the arm joint, providing flexible positioning. It can extend up to 21 inches from the wall and retract to a minimum of 3 inches when not in use, maximizing desktop space.

выява: A monitor arm swiveling and folding towards the wall, demonstrating how it can control desktop space by retracting to a minimum of 3 inches and extending up to 21 inches.

7.5 Рэгуляванне вышыні

The gas spring mechanism allows for a smooth 10.6-inch vertical height adjustment, enabling ergonomic positioning for both seated and standing work.

выява: Празрысты view of the monitor arm highlighting the internal gas spring and demonstrating a 10.6-inch height adjustment range for smooth movement.

7.6 Арганізацыя кабеляў

Route your cables through the integrated cable management channels on the arm to maintain a clean and organized workspace.

выява: A monitor arm with blue cables neatly routed along its underside, illustrating the integrated cable management feature designed to keep the workspace tidy.

8. Тэхнічнае абслугоўванне

• Уборка: Працярыце мацаванне мяккай губкайamp тканінай. Пазбягайце абразіўных ачышчальнікаў або растваральнікаў.
• Перыядычныя праверкі: Перыядычна правярайце ўсе шрубы і балты, каб пераканацца, што яны надзейна закручаныя. Пры неабходнасці падцягвайце.
• Gas Spring: The gas spring is designed for long-term use and generally requires no maintenance. If movement becomes stiff or loose, refer to the gas spring adjustment section.

9. Выпраўленне непаладак

• Monitor does not stay in position (drifts up or down): This indicates incorrect gas spring tension. Refer to Section 7.1 "Gas Spring Adjustment" and adjust the tension screw until the monitor holds its position smoothly. Remember to hold the arm horizontally during adjustment.
• Monitor is difficult to move: The gas spring tension may be too high for your monitor's weight, or the pivot points might be too tight. Loosen the gas spring tension slightly (turn clockwise) or check for any overtightened bolts at the arm joints.
• Monitor wobbles: Ensure all mounting bolts (wall plate, arm to wall plate, VESA plate to monitor, and monitor to arm) are securely tightened. Check that the wall mount is firmly attached to a suitable wall structure.
• Monitor cannot tilt: Ensure the tilt angle adjustment bolt (refer to Section 7.2) is sufficiently loosened before attempting to tilt the monitor.

10. Гарантыя і падтрымка

This MOUNTUP product is backed by a 3-year support period. If you encounter any issues during installation or use, or have any questions, please contact MOUNTUP customer service for assistance. Refer to your purchase documentation for contact details.