Mitutoyo 543-783B-10 ID-S1012EXB Digital Indicator Instruction Manual

1. Прадукт скончыўсяview

The Mitutoyo ABSOLUTE Digimatic ID-S indicators are designed for precise measurement of short linear distances. They feature an impact-resistant LCD display for clear readings. This manual provides essential information for the proper setup, operation, and maintenance of your ID-S1012EXB Digital Indicator.

Асноўныя характарыстыкі

• ABSOLUTE (ABS) Linear Scale: Eliminates the need to set the origin point each time the indicator is powered on.
• SPC Output Function: Enables quick and easy real-time data management.
• Функцыі: Includes Origin set, zero set, Go/No-Go judgment, counting direction switching, power On/Off, data output, and inch/mm conversion (on inch/metric models).
• Origin Reset Not Required: Data remains even after temporary disappearance due to insufficient illumination.
• Glare-free Flat Crystal Face: Allows easy reading of graduations. Accuracy: 8 µm/ graduation: 0.01 mm/ dial reading: 0-40-1.
• O-ring Seal on Bezel: Provides smooth rotation and prevents dust and oil from penetrating to the dial face.
• Multi-layer Coatings: Applied to the crystal for enhanced durability and visibility.

2. Камплектуючыя і зборка

Familiarize yourself with the components of your Mitutoyo Digital Indicator before assembly and operation.

Малюнак 1: Фронт view of the Mitutoyo ID-S1012EXB Digital Indicator. This image shows the main body of the indicator with its digital display and measurement probe.

Малюнак 2: Выбухнуў view of the Mitutoyo ID-S1012EXB Digital Indicator and its accessories. This image displays the indicator, various mounting accessories, and a stand, illustrating how the components fit together.

Ўстаноўка акумулятара

The indicator requires a silver oxide battery (included). To install or replace the battery:

1. Locate the battery compartment cover on the back of the indicator.
2. Акуратна зніміце вечка.
3. Insert the silver oxide battery with the correct polarity (+/-).
4. Надзейна заменіце крышку батарэйнага адсека.

Мацаванне індыкатара

The indicator can be mounted using its 3/8 inch stem. Ensure it is securely fastened to a suitable stand or fixture for stable measurements.

3. Інструкцыя па эксплуатацыі

Follow these steps for accurate measurement using your digital indicator.

Уключэнне/выключэнне харчавання

• Націсніце ВКЛ/ВЫКЛ button to power the indicator on or off.
• Due to the ABSOLUTE linear scale, the origin point does not need to be reset upon power-on.

Налада нуля

1. Position the indicator's contact point against the reference surface or workpiece.
2. Націсніце НУЛЬ/АБС button to set the current position as the zero reference.

Origin Setting (Absolute Mode)

The ABSOLUTE system retains the origin point even when the power is off. If the origin needs to be re-established (e.g., after battery replacement or significant displacement):

1. Move the spindle to the desired origin position.
2. Націсніце і ўтрымлівайце ПАХОДЖАННЕ button until the display shows "0.000".

Inch/Millimeter Conversion

For inch/metric models, press the У/ММ button to switch between inch and millimeter display units.

Go/No-Go Judgment

Refer to the specific instructions for setting upper and lower tolerance limits for Go/No-Go judgment, typically found in the full product manual or through the device's interface.

Data Output (SPC)

The SPC output function allows for data transfer to external devices for analysis. Connect the appropriate SPC cable (sold separately) to the data output port on the indicator and your data collection system. Follow the instructions provided with your SPC software for data acquisition.

4. Тэхнічнае абслугоўванне

Proper maintenance ensures the longevity and accuracy of your Mitutoyo Digital Indicator.

• Уборка: Wipe the indicator with a clean, dry, soft cloth. Avoid using solvents or abrasive cleaners.
• захоўванне: Store the indicator in its protective case in a dry, dust-free environment when not in use.
• акумулятар: Replace the battery promptly when the low battery indicator appears. Remove the battery if the indicator will not be used for an extended period.
• агляд: Regularly inspect the contact point and spindle for wear or damage.

5. Выпраўленне непаладак

У гэтым раздзеле разглядаюцца распаўсюджаныя праблемы, з якімі вы можаце сутыкнуцца.

6. Тэхнічныя характарыстыкі

Technical specifications for the Mitutoyo ID-S1012EXB Digital Indicator.

• Нумар мадэлі: ID-S112PXB2 (Note: Product title indicates ID-S1012EXB, but specifications list ID-S112PXB2. User should verify their specific model.)
• Дакладнасць вымярэння: ±0.0010" / 0.02mm
• Вага прадмета: 235 г
• Памеры пасылкі: 19 х 10.9 х 7.5 см
• Колькасць у пакаванні: 1
• Уключаныя кампаненты: Indicator, Battery
• Тып батарэі: Аксід срэбра

7. Відэа пра прадукт

Паглядзіце гэтае афіцыйнае відэа пра прадукт, каб атрымаць візуальнае ўяўленнеview of the Mitutoyo Digital Indicator.

8. Гарантыя і падтрымка

For warranty information, technical support, or service inquiries, please contact Mitutoyo customer service or visit the official Mitutoyo webсайт. Захоўвайце чэк аб куплі як пацверджанне пакупкі.

вытворца: Мітутоё