SAMCON SBE-C-1 DC LED Light with Switch User Manual

Уводзіны

Thank you for choosing the SAMCON SBE-C-1 DC LED Light with Switch. This energy-efficient LED light is designed for various DC applications, providing bright and reliable illumination. Please read this manual carefully before installation and operation to ensure safe and optimal performance.

Важныя інструкцыі па бяспецы

• Перад устаноўкай або абслугоўваннем адключыце сілкаванне.
• This product is designed for DC (Direct Current) power sources only. Ensure the power supply matches the product's voltagэлектронныя патрабаванні.
• Do not expose the light to excessive moisture or extreme temperatures.
• Handle the LED board with care to avoid damage to components.
• Ensure proper polarity when connecting wires (red for positive, black for negative). Incorrect polarity can damage the device.
• Installation should be performed by a qualified individual if you are unsure.

Змест пакета

• 1 x SAMCON SBE-C-1 DC LED Light with Switch

Прадукт скончаныview

The SAMCON SBE-C-1 is a compact and energy-efficient DC LED light featuring an integrated switch for convenient operation. It consists of an LED board with multiple LED chips, a control component, and pre-attached power wires.

Малюнак 1: Спераду view of the SAMCON SBE-C-1 DC LED Light board, displaying the array of LED chips, the SAMCON brand name, model number SBE-C-1, and the attached red (positive) and black (negative) power wires.

Малюнак 2: Назад view of the SAMCON SBE-C-1 DC LED Light board, revealing a metallic heat sink plate designed for thermal management, with two visible screw holes for mounting.

Інструкцыя па ўстаноўцы

1. Падрыхтуйце мантажную паверхню: Choose a suitable, flat surface for mounting the LED light. Ensure the surface can support the light and is free from obstructions.
2. Замацуеце святлодыёдны свяцільнік: Use appropriate screws (not included) to secure the LED board to the chosen surface through the mounting holes. Refer to Figure 2 for the location of mounting holes on the back plate.
3. Падключыце харчаванне:
   • Identify the positive (+) and negative (-) terminals of your DC power source.
   • Падключыце чырвоны провад from the LED light to the станоўчы (+) вывад of your DC power source.
   • Падключыце чорны провад from the LED light to the мінусавая (-) клема of your DC power source.
   • Warning: Ensure correct polarity to prevent damage to the LED light.
4. Праверка злучэнняў: Двойчы праверце ўсе злучэнні, каб пераканацца ў іх надзейнасці і правільнай палярнасці.

Інструкцыя па эксплуатацыі

1. Уключэнне: Once the LED light is securely installed and correctly wired to a compatible DC power source, apply power to the circuit.
2. Use the Switch: The SAMCON SBE-C-1 features an integrated push-button switch. Press the switch to turn the LED light ON. Press it again to turn the LED light OFF.

Тэхнічнае абслугоўванне

• Уборка: Gently wipe the LED light with a soft, dry cloth to remove dust. Do not use abrasive cleaners or solvents.
• агляд: Periodically check the wiring for any signs of wear or damage. Ensure mounting screws remain tight.
• Кіраванне цяплом: Ensure adequate airflow around the back of the LED board (heat sink) to prevent overheating, especially during prolonged use.

Ліквідацыю непаладак

Тэхнічныя характарыстыкі

Гарантыя і падтрымка

For warranty information or technical support, please contact SAMCON customer service through your point of purchase. Keep your purchase receipt as proof of purchase.