ХМФ 49216-02
HMF Safe Instruction Manual
Мадэль: 49216-02
1. Уводзіны
This manual provides essential information for the safe and effective use of your HMF Small Furniture Safe. Please read these instructions carefully before setup and operation to ensure proper functionality and security.

Figure 1: HMF Small Furniture Safe (Model 49216-02) with the door open and key inserted.
2. Інфармацыя па бяспецы
Заўсёды прытрымвайцеся наступных рэкамендацый бяспекі:
- Keep keys in a secure location away from the safe. Do not store keys inside the safe.
- Пераканайцеся, што сейф надзейна прымацаваны да сцяны або падлогі, каб прадухіліць яго несанкцыянаванае зняцце.
- Do not attempt to force the lock or door.
- Keep the safe away from extreme temperatures and moisture.
- This safe is designed for storing valuables and documents; it is not fireproof or waterproof unless explicitly stated.
3. Змесціва ўпакоўкі
Праверце наяўнасць усіх кампанентаў у камплекце:
- 1 x HMF Small Furniture Safe
- 2 x Double Point Keys
- 2 x Metal Dowels
- 2 х крапежныя шрубы

Figure 2: Included accessories: two double point keys and two metal dowels for secure mounting.
4. Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| Нумар мадэлі | 49216-02 |
| Марка | HMF |
| Знешнія памеры (Ш х У х Г) | 23 х 17 х 17 см |
| Унутраныя памеры (Ш х В х Г) | 22.5 x 16.5 x 16.5 cm (suitable for DIN A5 documents) |
| Вага | 2.35 кг |
| Матэрыял | Легаваная сталь |
| Таўшчыня сценкі | 1 mm (body), 3 mm (door) |
| Тып замка | Mechanical double-bit lock with three-bolt lock |
| Мантаж | Prepared holes for wall or floor mounting |

Figure 3: External dimensions of the HMF safe.
5. Настройка і ўстаноўка
5.1 Распакаванне
Carefully remove the safe and all accessories from the packaging. Inspect for any damage. Retain packaging for future transport or storage if needed.
5.2 Opening the Safe for the First Time
- Locate one of the two double-bit keys provided.
- Insert the key into the keyhole on the safe door.
- Павярніце ключ па гадзіннікавай стрэлцы, каб разблакаваць сейф.
- Адчыніце дзверы.

Figure 4: Safe door open, revealing the three-bolt locking mechanism.
5.3 Мантаж сейфа
The safe is equipped with pre-drilled holes for secure mounting to a wall or floor. This significantly enhances security.
- Choose a suitable location for the safe, considering both accessibility and concealment.
- Mark the drilling points on the wall or floor using the safe's pre-drilled holes as a template. The safe has two holes on the back and two on the bottom.
- Drill holes at the marked points using an appropriate drill bit for your wall/floor material.
- Insert the provided metal dowels into the drilled holes.
- Align the safe with the dowels and secure it using the provided fixing screws. Ensure the safe is firmly attached and does not wobble.

Малюнак 5: Задняя частка view сейфа, падкрэсліваючы папярэдне прасвідраваныя мантажныя адтуліны.
6. Operating the Safe
6.1 Замыканне сейфа
- Ensure the safe door is fully closed.
- Insert the double-bit key into the keyhole.
- Turn the key counter-clockwise until it stops. The three bolts will extend, securing the door.
- Выміце ключ і захоўвайце яго ў бяспечным асобным месцы.

Figure 6: The safe in a closed and locked position.
6.2 Unlocking the Safe
- Insert the double-bit key into the keyhole.
- Turn the key clockwise until it stops. The three bolts will retract.
- Адчыніце дзверы.
- You can now access the contents of your safe.

Малюнак 7: Інтэр'ер view of the safe, suitable for storing various small valuables.
7. Тэхнічнае абслугоўванне
- Уборка: Працярыце знешнія паверхні сейфа мяккай губкайamp тканінай. Пазбягайце абразіўных ачышчальнікаў або растваральнікаў, якія могуць пашкодзіць пакрыццё.
- Механізм замка: The mechanical lock requires minimal maintenance. If the key turns stiffly, a small amount of graphite lubricant (not oil) can be applied to the key and inserted into the lock.
- агляд: Periodically check the mounting screws to ensure they remain tight.
8. Выпраўленне непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Key does not turn or turns stiffly. | Obstruction in keyhole, worn key, or dry lock mechanism. | Ensure no debris is in the keyhole. Try the second key. Apply a small amount of graphite lubricant to the key and insert into the lock. |
| Safe door does not open after unlocking. | Bolts not fully retracted, door stuck. | Ensure the key is turned fully clockwise. Gently pull the door. Do not force. |
| Safe feels loose after mounting. | Mounting screws are loose or not properly installed. | Tighten all mounting screws. If necessary, re-install the safe ensuring proper dowel and screw placement. |
9. Інфармацыя аб гарантыі
HMF products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or visit the official HMF webсайт. Захоўвайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.
10. Падтрымка кліентаў
If you encounter any issues not covered in this manual or require further assistance, please contact HMF customer support:
- Webсайт: www.hmf.de (Please note: This is a general placeholder. Refer to your product packaging or purchase details for specific regional support contacts.)
- электронная пошта: support@hmf.de
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.