SPLATRBALL SRB370

SPLATRBALL SRB370 Water Bead Blaster Kit Instruction Manual

Model: SRB370

1. Уводзіны

The SPLATRBALL SRB370 Full Auto Water Bead Blaster is designed for outdoor recreational use, firing 7.5mm Splat-R-Ball water bead ammunition. This blaster features a 375-round internal reservoir and can shoot up to 7 rounds per second at a velocity of up to 135 feet per second. The water balls are soft, non-staining, and require virtually no cleanup, as they disintegrate on impact. This manual provides essential information for the safe and effective operation of your blaster.

Important Safety Note: Do not aim for eyes.

2. Што ўваходзіць у камплект

Your SPLATRBALL SRB370 Blaster Kit includes the following components:

  • One Water Ball Blaster with 375-round internal reservoir
  • Кліп для слінга
  • 2,500 rounds of certified SplatRBall water ball beads
  • Rechargeable 7.4V 500 mAh battery
  • USB кабель для зарадкі
  • Foldable water ball loading funnel
  • Ахоўныя акуляры

3. Настройка

  1. Prepare Water Beads:
    Place the 2,500 SplatRBall water beads in a container with plenty of water. Allow them to soak for at least 4 hours, or until they expand to 7.5mm in diameter. Ensure they are fully hydrated for optimal performance and to prevent jamming.
  2. Зарадзіць акумулятар:
    Locate the USB charging port on the blaster. Connect the provided USB charging cable to the blaster and to a compatible USB power source (e.g., wall adapter, computer USB port). The battery is a rechargeable 7.4V 500 mAh unit. Allow sufficient time for a full charge before first use.
  3. Load Water Beads:
    Unscrew the cap from the internal reservoir on top of the blaster. Use the foldable water ball loading funnel to carefully pour the hydrated water beads into the reservoir. Ensure the reservoir is securely closed after loading.
  4. Attach Sling Clip (Optional):
    If desired, attach the sling clip to the designated attachment points on the blaster for easier carrying during play.
  5. Надзеньце ахоўныя акуляры:
    Always wear the provided safety glasses before operating the blaster to protect your eyes from stray water beads.
Image showing the ammo loading port on the SplatRBall SRB370 Blaster.

Малюнак 1: Буйны план view of the ammo loading port on the SplatRBall SRB370 Blaster. The green tab indicates the opening for pouring water beads into the internal reservoir.

Image showing the rechargeable 7.4V 500mAh battery and USB charging cable.

Figure 2: The rechargeable 7.4V 500mAh battery and its accompanying USB charging cable, essential for powering the blaster.

Image showing the safety glasses included with the kit.

Figure 3: The safety glasses provided in the kit, crucial for eye protection during blaster operation.

4. Інструкцыя па эксплуатацыі

  1. Уключэнне/выключэнне харчавання:
    Locate the power switch on the blaster. Slide the switch to the 'ON' position to activate the blaster.
  2. Select Firing Mode:
    The blaster features a two-position selector switch: 'Safe' and 'Full Auto'. Move the switch to 'Full Auto' for continuous firing. Ensure the switch is in 'Safe' mode when not in use.
  3. Стральба:
    Once powered on and in 'Full Auto' mode, press the trigger to fire water beads. The blaster will shoot approximately 7 water balls per second.
Image showing the selector switch on the SplatRBall SRB370 Blaster.

Figure 4: The selector switch on the side of the blaster, allowing users to choose between 'Safe' and 'Full Auto' firing modes.

5. Тэхнічнае абслугоўванне

  • Уборка: The water balls are non-staining and designed for virtually no cleanup. Any residue can typically be rinsed with water.
  • захоўванне: Store the blaster in a cool, dry place away from direct sunlight. Ensure the battery is fully charged before long-term storage.
  • Сыход за батарэяй: Do not overcharge or completely drain the battery. Follow charging instructions carefully.

6. Выпраўленне непаладак

  • Бластэр не страляе:
    • Праверце, ці зараджаны акумулятар.
    • Пераканайцеся, што выключальнік харчавання знаходзіцца ў становішчы «ON».
    • Verify the firing mode selector is set to 'Full Auto'.
    • Confirm there are sufficient water beads in the reservoir.
  • Gel Beads Jamming:
    • Ensure water beads are fully hydrated to the correct 7.5mm size.
    • Only use certified SplatRBall water ball beads.
    • Clear any obstructions from the loading port or barrel.

7. Тэхнічныя характарыстыкі

АсаблівасцьДэталь
Нумар мадэлі950007
Тып боепрыпасаў7.5mm SplatRBall Water Beads
Ёмістасць рэзервуара375 Rounds (Internal)
ХуткастрэльнасцьДа 7 стрэлаў у секунду
ХуткасцьUp to 135 feet per second
акумулятарRechargeable 7.4V 500 mAh Lithium Ion
ЗарадкаUSB Charging Cable (Included)
Рэжым працыПоўны аўтамат
МатэрыялПластыкавыя
КолерБелы
Вага прадмета2 фунта
Памеры прадмета (Д х Ш х У)16 см Д х 2.63 см Ш х 8.5 см В

8. Папярэджанні па тэхніцы бяспекі

  • Абарона вачэй: Always wear safety glasses when operating or near the blaster.
  • Бяспечная мэта: Не цэліцеся ў вочы ці твар.
  • Рэкамендаваны ўзрост: Recommended for users aged 14 years and older.
  • Боепрыпасы: Use only certified SplatRBall water ball beads. Other gel beads may damage the blaster or not meet safety standards.
  • Ўздзеянне вады: Do not put water directly into the blaster's hopper or internal mechanisms, as this can cause permanent damage to electronics.
  • Кантроль: За маленькімі карыстальнікамі рэкамендуецца нагляд дарослых.

9. Гарантыя і падтрымка

For warranty information, product support, or to purchase additional accessories and water beads, please visit the official SPLATRBALL webсайт або звярніцеся непасрэдна ў службу падтрымкі кліентаў. Захоўвайце пацвярджэнне пакупкі для прэтэнзій па гарантыі.

SPLATRBALL Official Store: Visit the SPLATRBALL Store

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.