Уводзіны
Thank you for choosing the Lenercom 1500A 12V Car Jump Starter with 150 PSI Tire Inflator. This versatile device combines four essential functions: a powerful car jump starter, a portable tire inflator, a 12000mAh power bank, and an emergency LED flashlight. This manual provides detailed instructions for safe and effective use, maintenance, and troubleshooting.
Image: The Lenercom 4-in-1 device highlighting its functions as a jump starter, air compressor, power bank, and LED light.
Важная інфармацыя па бяспецы
Калі ласка, прачытайце ўсе папярэджанні і інструкцыі па бяспецы перад выкарыстаннем гэтага прадукта. Невыкананне гэтых інструкцый можа прывесці да паражэння электрычным токам, пажару і/або сур'ёзных траўмаў.
- Do not connect the jump starter to a vehicle battery with a voltagе вышэй 12 В.
- Ensure the jump starter has more than 30% power before attempting to jump-start a vehicle.
- Не дапускайце станоўчых і адмоўных склamps дакранацца адзін да аднаго.
- Захоўвайце прыладу далей ад дзяцей.
- Store in a cool, dry place, away from direct sunlight and high temperatures.
- Выкарыстоўвайце толькі прадастаўленыя кабелі і аксэсуары.
- Не разбірайце і не мадыфікуйце прыладу.
Image: The Lenercom jump starter highlighting its intelligent chip protection and robust design for extreme environments.
Прадукт скончаныview
The Lenercom PM4-12 includes the following components:
- Lenercom 1500A Jump Starter Unit
- Smart Jumper Cables (with clamps)
- USB-кабель для зарадкі
- Air Hose for Tire Inflator
- 3 x Air Nozzles (for various inflatables)
- Сумка для захоўвання
- Кіраўніцтва карыстальніка
Настройка
Першапачатковая зарадка
Before first use, or after a long period of non-use, fully charge the jump starter. Use a 5V/2A USB adapter (not included) with the provided USB cable. The LCD screen will display the battery level. A full charge ensures optimal performance and extends battery life.
To prolong battery life, discharge and recharge the unit completely every 3 months.
Інструкцыя па эксплуатацыі
1. Запуск аўтамабіля ад дажджу
- Ensure the jump starter has at least 30% charge.
- Злучыць чырвоны (+) склamp да станоўчага (+) вываду акумулятара аўтамабіля.
- Злучыць чорны (-) склamp да мінусавай (-) клемы акумулятара аўтамабіля.
- Plug the smart jumper cable connector into the jump starter's port. The indicator light on the smart cable will turn green.
- Запусціце рухавік аўтамабіля.
- Once the engine starts, immediately remove the smart jumper cable from the jump starter, then disconnect the black (-) clamp, а затым чырвоны (+) clamp ад акумулятара аўтамабіля.
The Lenercom 1500A can jump-start vehicles with up to 7L gas or 4L diesel engines.
Image: The Lenercom jump starter connected to a car battery using the red and black clamps, ready to jump-start the vehicle.
2. Using the Tire Inflator
- Screw the air hose onto the tire valve stem.
- Connect the other end of the air hose to the inflator port on the jump starter.
- The LCD screen will display the current tire pressure.
- Use the '+' and '-' buttons to set the desired pressure. You can switch between units (PSI, Bar, Kpa, kg/cm²) using the unit button.
- Press the power button to start inflation. The inflator will automatically stop once the preset pressure is reached.
The 150 PSI air compressor can inflate car tires (195/65/R15 from 0 to 35 PSI in approximately 6 minutes), bicycles, balls, and other inflatables using the included nozzles.
Image: The Lenercom portable air compressor connected to a car tire, displaying pressure readings on its digital screen.
3. Выкарыстанне ў якасці паўэрбанка
The Lenercom jump starter features a 12000mAh battery capacity with QC3.0 fast charging output and two USB ports. This allows you to charge mobile phones, tablets, and other USB-powered devices.
- Connect your device to one of the USB output ports using a compatible USB cable.
- Пускавая прылада аўтаматычна пачне зараджаць вашу прыладу.
Image: The Lenercom device connected via USB cable, charging a smartphone, demonstrating its power bank functionality.
4. Выкарыстанне святлодыёднай лямпы
The integrated LED light offers three modes for various situations:
- Рэжым ліхтарыка: Press and hold the light button to turn on the flashlight.
- Рэжым строб: Press the light button again to switch to strobe mode.
- Рэжым SOS: Press the light button a third time for SOS signaling.
- Press and hold the light button to turn off the LED light.
Image: The Lenercom device with its LED light illuminated, demonstrating its use as a flashlight.
Тэхнічнае абслугоўванне
- Зарадка: To maintain battery health, fully discharge and recharge the unit every three months, even if not in use.
- Уборка: Працірайце прыладу мяккай сухой тканінай. Не выкарыстоўвайце агрэсіўныя хімічныя рэчывы або абразіўныя матэрыялы.
- захоўванне: Store the jump starter in a cool, dry place between -4°F to 140°F (-20°C to 60°C). Keep it away from moisture and direct sunlight.
Ліквідацыю непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Vehicle does not start after jump-starting attempt. | Jump starter battery too low; incorrect clamp connection; vehicle battery completely dead. | Ensure jump starter has >30% charge. Check clamp polarity and secure connection. If vehicle battery is completely dead, it may not activate the jump starter's safety features. Consult a professional. |
| Tire inflator not working or inaccurate. | Air hose not securely connected; incorrect pressure setting; jump starter battery low. | Ensure air hose is tightly screwed onto valve and inflator port. Verify desired pressure setting. Charge the jump starter. |
| Прылада не зараджаецца або зараджаецца павольна. | Faulty USB cable or adapter; jump starter battery full. | Use the provided USB cable and a 5V/2A adapter. Try a different cable or adapter. The device will stop charging once full. |
| LED light not turning on. | Jump starter battery low; button not pressed correctly. | Charge the jump starter. Press and hold the light button for a few seconds to activate. |
Тэхнічныя характарыстыкі
| Асаблівасць | Спецыфікацыя |
|---|---|
| мадэль | ПМ4-12 |
| Пікавы ток | 1500А |
| тtage | 12В |
| Ёмістасць батарэі | 12000mAh (Lithium-polymer) |
| Ціск паветранага кампрэсара | Да 150 PSI |
| USB выхад | QC3.0 & Standard USB |
| Працоўная тэмпература | Ад -4°F да 140°F (ад -20°C да 60°C) |
| Памеры (Д х Ш х У) | 16.5 х 10 х 4.5 см (6.5 х 3.9 х 1.8 цалі) |
| Вага | 1 кг (2.2 фунтаў) |
Гарантыя і падтрымка
Lenercom products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Lenercom website. If you encounter any issues or have questions regarding your device, do not hesitate to contact our customer service team for assistance.