CONTEC CMS50Q1 Fingertip Pulse Oximeter User Manual

1. Уводзіны

The CONTEC CMS50Q1 Fingertip Pulse Oximeter is a portable, non-invasive device designed for spot-checking of oxygen saturation (SpO2) and pulse rate (PR) through the finger. It is specifically designed for individuals with small fingers, such as children, and is suitable for sports and aviation use. This device is not intended for medical diagnosis or treatment.

Important Note: This device is for Sports or Aviation use only and is not a medical device. Consult a healthcare professional for any medical concerns.

2. Прадукт скончыўсяview

2.1 Асноўныя магчымасці

• Small Finger Design: Specifically designed to fit finger diameters greater than 0.2 inch (5mm), making it suitable for children.
• Accurate & Fast Results: Provides quick and precise measurements of SpO2 and pulse rate.
• Чысты дысплей: Features a digital rotatable TFT display showing SpO2 value, pulse rate value, bar graph, and pulse waveform.
• Лёгкае кіраванне: Simple one-button operation for power on and measurement.
• Зручны дызайн: Fingertip clip made with silica gel material for comfort.
• Доўгі тэрмін службы батарэі: Offers 20-30 hours of battery life with automatic power-off after 5 seconds of inactivity.

2.2 Што ў камплекце

• CONTEC CMS50Q1 Pulse Oximeter (Main Unit)
• Шнурок
• Кіраўніцтва карыстальніка
• Cartoon Stickers
• Адвёртка (для батарэйнага адсека)

2.3 Кампаненты прадукту

This image illustrates the various parts of the CMS50Q1 Pulse Oximeter, including the display elements and physical features like the lanyard loop hole and battery cover.

3. Настройка

3.1 Устаноўка батарэі

1. Locate the battery compartment on the back of the oximeter.
2. Use the provided screwdriver to loosen the screw on the battery cover.
3. Зніміце крышку батарэйнага адсека.
4. Устаўце дзве батарэйкі тыпу ААА (не ўключаны ў камплект) у адсек, сачыце за правільнай палярнасцю (+/-).
5. Replace the battery cover and secure it with the screw using the screwdriver. This screw helps prevent accidental battery access, especially for children.

This image demonstrates the battery installation process and subsequent steps for taking a measurement.

3.2 Мацаванне шнурка

Thread the thin loop of the lanyard through the lanyard loop hole on the oximeter. Then, pass the larger part of the lanyard through the thin loop and pull gently to secure it. This allows for convenient carrying.

This image shows the device dimensions and how to attach the included lanyard.

4. Інструкцыя па эксплуатацыі

4.1 Вымярэнне

1. Ensure the oximeter has batteries installed.
2. Адкрыйце зашчапку аксіметра.
3. Insert one of your fingers (preferably the index finger) into the rubber opening of the oximeter, ensuring the finger is placed correctly and fully inside. The device is designed for finger diameters greater than 0.2 inch (5mm).
4. Націсніце кнопку харчавання адзін раз, каб уключыць аксіметр.
5. Keep your hand still and avoid movement during the measurement.
6. The SpO2 and pulse rate readings will appear on the display within a few seconds.

4.2 Display Orientation

The display of the CMS50Q1 Pulse Oximeter can rotate automatically to provide optimal viewing from different angles. Simply adjust the device's orientation, and the display will adapt.

This image demonstrates the rotatable display feature of the oximeter.

4.3 Аўтаматычнае адключэнне

The device will automatically power off after approximately 5 seconds of inactivity (when no finger is detected) to conserve battery life.

5. Адлюстраванне інфармацыі

The TFT display provides the following information:

• SpO2 (%): Узровень насычэння крыві кіслародам.
• PRbpm: Pulse Rate in beats per minute.
• Гістаграма: A visual representation of pulse strength.
• Pulse Waveform: A graphical representation of the pulse.
• Індыкатар разраду батарэі: An icon indicating when batteries need replacement.

This image shows a typical display reading with SpO2, PRbpm, and the pulse waveform.

6. Тэхнічнае абслугоўванне і догляд

6.1 Cleaning the Oximeter

• Clean the surface of the oximeter before and after each use with a soft cloth dampened with medical alcohol (70% ethanol or isopropanol).
• Do not immerse the device in water or other cleaning solutions.
• Ensure the device is completely dry before reuse.

6.2 Замена батарэі

When the low battery indicator appears on the display, replace the batteries promptly. Follow the battery installation steps in Section 3.1.

6.3 Захоўванне

Store the oximeter in a cool, dry place away from direct sunlight, extreme temperatures, and humidity. If the device will not be used for an extended period, remove the batteries to prevent leakage.

7. Выпраўленне непаладак

8. Тэхнічныя характарыстыкі

• Памеры прадукту: 2.32 х 1.42 х 1.38 цалі
• Вага прадмета: 3.52 унцыі
• Measuring Range SpO2: 70-100%
• Measuring Range Pulse Rate: 0-250 удараў у хвіліну
• Тэрмін службы батарэі: Прыкладна 20-30 гадзін
• Крыніца харчавання: 2 х ААА батарэі (не ўключаны)
• Аўтаматычнае адключэнне: Пасля 5 секунд бяздзейнасці
• вытворца: Contec Medical Systems Co.,Ltd

9. Інфармацыя па бяспецы

• This device is intended for sports and aviation use only. It is not a medical device and should not be used for medical diagnosis or treatment.
• Do not use the oximeter during sports activities, as movement can affect accuracy.
• Keep the device out of reach of small children to prevent choking hazards from small parts like batteries or the lanyard.
• Avoid exposing the device to direct sunlight, high temperatures, or moisture.
• Не спрабуйце рамантаваць або мадыфікаваць прыладу самастойна. Звярніцеся ў службу падтрымкі, калі ўзнікнуць праблемы.

10. Інфармацыя аб падтрымцы

For technical support or inquiries regarding your CONTEC CMS50Q1 Pulse Oximeter, please contact the manufacturer using the details below:

• Тэлефон службы тэхнічнай падтрымкі: +86-335-8015431
• электронная пошта: contecmed@contecmed.com.cn
• Webсайт: http://www.contecmed.com

Please refer to the official CONTEC webна сайце або ў дакументацыі па куплі, каб даведацца пра канкрэтныя гарантыйныя ўмовы.