Прадукт скончаныview
The Phrozen Water-Washable Rapid Black Resin is a 405nm LCD UV-Curing photopolymer resin designed for high-precision 3D printing. This resin offers ease of use and post-processing due to its water-washable properties, low viscosity, and low odor. It is formulated to produce sturdy and tough printed parts, making it suitable for various models and prototyping applications.
Image: A bottle of Phrozen Water-Washable Rapid Black Resin positioned next to a highly detailed black 3D printed model, showcasing the resin's capability for intricate designs.
Інфармацыя па бяспецы
When handling Phrozen Water-Washable Rapid Black Resin, it is crucial to follow safety guidelines to prevent direct skin contact and ensure proper disposal. Always work in a well-ventilated area.
- Рэкамендуемая тэмпература: Maintain a working temperature between 20°C - 25°C for optimal resin performance.
- Сродкі індывідуальнай абароны: Always wear gloves and a mask to avoid direct skin contact and inhalation of fumes.
- захоўванне: Keep the resin away from children, dust, and direct sunlight to maintain its quality and prevent premature curing.
- Кантакт па надзвычайных сітуацыях: In case of direct skin contact with resin, wash immediately with plenty of water. Seek medical attention if irritation persists.
- Утылізацыя адходаў: Do NOT dump waste water directly. Cure the waste water with sunlight OR add 10% Waste Disposal Agent and filter the residue before dumping. This ensures environmental safety.
Image: A bottle of Phrozen Water-Washable Rapid Black Resin with text overlay highlighting important safety precautions and usage tips, including recommended temperature, wearing PPE, and proper disposal.
Настройка і падрыхтоўка
- Страсянуць бутэльку: Before each use, shake the resin bottle well to ensure the photopolymer components are thoroughly mixed.
- Падрыхтуйце прынтар: Ensure your 405nm LCD 3D printer is clean and ready for operation. Check the FEP film for any damage or residue.
- Заліць смалу: Carefully pour the Phrozen Water-Washable Rapid Black Resin into the printer's resin vat. Avoid overfilling.
Image: A close-up of a hand pouring the black resin into the printer's vat, demonstrating the resin's low viscosity and ease of pouring.
Інструкцыя па эксплуатацыі
Phrozen Water-Washable Rapid Resin is optimized for 405nm LCD printers, designed for fast printing without compromising quality.
- Slicer Settings: Refer to your 3D printer's specific slicer software for recommended exposure times and layer heights. For this resin, a recommended layer height is 30-100 µm.
- Пачаць друк: Initiate the printing process according to your printer's instructions. The resin's rapid curing properties contribute to faster print times.
- Друк на маніторы: Observe the initial layers to ensure proper adhesion and formation.
Video: This video demonstrates the capabilities of Phrozen 3D printers and the precision achievable with their resins, including the ease of use and high-speed printing features. It showcases various applications, from artistic models to dental molds, highlighting the versatility of the Phrozen ecosystem.
Maintenance and Post-Processing
Proper post-processing is essential for achieving the best results and durability from your prints.
- Уборка: Unlike standard resins, Phrozen Water-Washable Resin can be cleaned with water. Rinse the printed part thoroughly with water to remove uncured resin. For best results, use a soft brush or ultrasonic cleaner.
- Сушка: Ensure the cleaned part is completely dry before post-curing. You can use compressed air or allow it to air dry.
- Пасля отвержденія: Cure the cleaned and dried part under UV light (405nm) to achieve maximum hardness and strength. The resin is designed to be tough and non-brittle after proper curing.
- Выдаленне падтрымкі: Printed parts are sturdy, allowing for easier support removal. Carefully remove supports using appropriate tools.
Image: A 3D printed model is shown being rinsed under flowing water, emphasizing the water-washable characteristic of the resin for easy cleanup.
Image: A side-by-side comparison of two ghost-shaped 3D printed models. One, labeled "phrozen", is smooth and intact, while the other, labeled "others", shows visible cracks, illustrating the superior toughness and non-brittle nature of Phrozen resin.
Ліквідацыю непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Print Fails to Adhere to Build Plate | Insufficient bottom exposure time, cold resin/environment, dirty build plate. | Increase bottom exposure time. Ensure resin and room temperature are within 20-25°C. Clean and level the build plate. |
| Printed Part is Brittle | Insufficient post-curing, over-exposure during printing. | Increase post-curing time under UV light. Reduce normal exposure time slightly if over-exposure is suspected. |
| Sticky/Tacky Surface After Cleaning | Incomplete cleaning, insufficient drying before curing. | Rinse thoroughly with water, ensuring all uncured resin is removed. Ensure the part is completely dry before post-curing. |
| Poor Print Detail/Resolution | Incorrect layer height, resin not properly mixed, printer calibration issues. | Verify layer height settings (30-100 µm recommended). Shake resin bottle well before use. Calibrate your printer if necessary. |
Тэхнічныя характарыстыкі прадукту
- Вага: 1KG per bottle
- Раздзяленне XY: 50 мкм
- Recommended Layer Height: 30-100 мкм
- Curing Wavelength: Ультрафіялетавае святло 405 нм
- глейкасць: Нізкі
- Пах: Нізкі
- Уласцівасці: Water-Washable, Tough, Non-Brittle, Fast-Printing
- Памеры прадукту: 3.5 х 3.5 х 8.2 цалі
- Вага прадмета: 1 кілаграма
- вытворца: PHROZEN TECH CO., LTD.
- Дата першай даступнасці: 12 чэрвеня 2020 г
Гарантыя і падтрымка
For detailed warranty information, technical support, or further inquiries regarding your Phrozen Water-Washable Rapid Black Resin, please visit the official Phrozen webсайт або звярніцеся ў службу падтрымкі кліентаў. Захоўвайце чэк аб куплі для прэтэнзій па гарантыі.
Phrozen Official Webсайт: www.phrozen3d.com
Крама Amazon: Phrozen Amazon Store