STARTRC Mini 3 Pro 2-in-1 Sun Hood & RC Joystick Protector Instruction Manual

1. Прадукт скончыўсяview

The STARTRC 2-in-1 Sun Hood and RC Joystick Protector is designed to enhance your drone flying experience by providing both screen glare reduction and physical protection for your remote controller. This accessory serves as a multi-level adjustable sunshade and a robust cover for the screen, buttons, and joysticks, preventing scratches and dust accumulation during transport and use.

2. Змесціва ўпакоўкі

• 1 x Sun Hood Protector Cover
• 2 x Screws (Note: Be careful not to lose these small screws.)

Note: Drone, remote control, joysticks, and other accessories are not included.

3. Сумяшчальнасць

This remote control protector sun hood is specifically designed for the following DJI RC remote controller models:

• DJI Mini 3 Pro RC
• DJI Mini 3 RC
• DJI Air 3S RC
• DJI Mavic 3 Classic RC
• DJI Mavic 3 Pro RC

Important: This product is NOT compatible with DJI RC 2.

4. Асноўныя магчымасці

• Дызайн 2-у-1: Functions as both a protective cover and a sunshade.
• Палепшаная бачнасць: Multi-level adjustable sun hood effectively reduces sun glare and light interference, providing a clearer view of the remote controller screen in various lighting conditions (sunny or snowy).
• Комплексная абарона: Guards against scratches, dust, and pressure damage to the screen, buttons, and joysticks. It also secures the joysticks during transport, preventing movement and potential damage.
• Вуглавы дызайн: Allows for shading without obstructing controller operation. Features multiple levels of adjustability for optimal viewныя вуглы.
• Зручнае захоўванне: Designed for easy storage in a bag. The one-snap-to-close mechanism eliminates the need to repeatedly disassemble and reassemble joysticks and the sun hood when storing the remote control.
• Дакладная пасадка: Features precise cutouts for all buttons and ports, ensuring normal use of the DJI RC remote controller. The cover is secured with screws for stability.
• Палепшаны матэрыял: Made with ultra-soft microfiber on the interior to prevent scratching the RC remote control screen.

5. Інструкцыі па ўсталёўцы

1. Распакуйце кампаненты: Carefully remove the sun hood protector cover and the two screws from the packaging.
2. Размесціце вокладку: Align the flat base of the sun hood protector with the back of your DJI RC remote controller. Ensure the screw holes on the protector match the corresponding holes on the controller.
3. Замацуеце шрубамі: Insert the two provided screws into the aligned holes. Gently tighten the screws to secure the protector to the controller. Do not overtighten.
4. Праверце ўстаноўку: Once secured, check that the protector is firmly attached and does not obstruct any buttons or ports on the controller.

Figure 1: Attaching the sun hood protector to the DJI RC controller using screws.

Figure 2: The ultra-soft microfiber lining ensures screen protection.

6. Інструкцыя па эксплуатацыі

1. Using as a Sunshade:
   • To deploy the sunshade, gently lift the top flap of the protector.
   • The sunshade features multiple adjustable levels (e.g., 90°, 120°, up to 180° rotation) to block direct sunlight and reduce glare on the controller screen. Adjust the angle to your preference for optimal visibility.
   • The angled design ensures that the sunshade does not interfere with the operation of the joysticks or buttons.
2. Using as a Protective Cover:
   • When not in use or during transport, fold the sunshade flap down to fully cover the screen and joysticks.
   • The cover will snap into place, providing full protection against scratches, dust, and accidental impacts.
   • This design allows for convenient storage of the remote controller without needing to remove the joysticks.

Figure 3: Demonstrating glare reduction with the sun hood in use.

Figure 4: The sun hood offers multiple adjustable angles for comfort and optimal viewінж.

7. Тэхнічнае абслугоўванне

• Уборка: Wipe the exterior of the sun hood with a soft, damp cloth. For the interior microfiber, use a dry, lint-free cloth to gently remove dust. Avoid harsh chemicals or abrasive materials.
• захоўванне: Store the sun hood and controller in a cool, dry place away from direct sunlight when not in use.
• агляд: Periodically check the screws for tightness and the overall condition of the cover for any signs of wear or damage.

8. Выпраўленне непаладак

9. Тэхнічныя характарыстыкі

10. Гарантыя і падтрымка

For warranty information or technical support, please refer to the official STARTRC webсайт або звярніцеся непасрэдна ў службу падтрымкі кліентаў. Захоўвайце чэк аб куплі як пацвярджэнне пакупкі для любых гарантыйных прэтэнзій.