Камплект сігналізацыі TOWODE WiFi (мадэль: хатняя сігналізацыя) - інструкцыя па эксплуатацыі

1. Прадукт скончыўсяview

This Wireless Security System kit provides comprehensive protection for your home, office, or shop. It includes a WiFi loud speaker, door/window sensors, and remote controls, all managed via the Tuya App.

Image 1: Complete TOWODE WiFi Security Alarm System Kit components.

2. Асноўныя магчымасці

• Комплексная абарона: Includes 6 door/window alarm sensors, 2 remote controls, 1 WiFi loud speaker, and 1 power plug for a complete security solution.
• Intelligent Security Management: Operates on a 2.4 GHz WiFi connection and offers remote control through the Tuya App (Android and iOS) for easy mode changes and device management.
• Імгненныя абвесткі: Sensors trigger a 120 dB loudspeaker alarm and send immediate notifications to your smartphone when doors or windows are opened.
• Пашыраная сістэма: Supports up to 20 remote controls and 30 additional sensors (e.g., motion, water leakage) with 433MHz wireless frequency (eV1527 code).
• 2.4 GHz WiFi Only: This product is exclusively compatible with 2.4 GHz WiFi networks and does not support 5G networks.

3. Настройка і ўстаноўка

3.1 Кампанент заview

WiFi Loud Speaker

Малюнак 2: Падрабязны view of the WiFi Loud Speaker components.

Пульт дыстанцыйнага кіравання

Image 3: Remote control for arming, disarming, SOS, and ringtone functions.

Датчык дзвярэй і вокнаў

Image 4: Wireless Door Alarm Sensor installation exampле.

3.2 Устаноўка батарэі датчыка

The door/window sensors come with batteries included, but an insulation sheet must be removed before first use. To replace the battery, follow these steps:

1. Push the back panel of the sensor downward to remove it.
2. Remove the insulation sheet or the old battery and install a new 12V battery (type 23A).
3. Push the back panel upward to complete the installation.

3.3 App Configuration (Tuya Smart / Smart Life)

Before configuring the network, ensure your phone is connected to a 2.4 GHz WiFi network, Bluetooth is enabled, and Location Services are authorized for the Tuya Smart App.

3.4 Спалучэнне датчыкаў і пультаў дыстанцыйнага кіравання

3.4.1 Pairing with Standalone Speaker

1. Unplug and plug the power cord of the standalone speaker three times to put it into pairing mode.
2. Trigger the door sensor (open/close) within 6 seconds to pair.
3. Unplug and replug the power cord to exit pairing mode.

3.4.2 Pairing with WiFi Speaker via SET button

1. Press the SET button on the WiFi speaker to put it into pairing mode.
2. Trigger the door sensor (open/close) within 20 seconds to pair.

3.4.3 Adding Accessories via App

To add additional sensors or remote controls through the Tuya App:

1. Open the Tuya App and navigate to the 'Accessories' section.
2. Press the '+' icon to enter pairing mode.
3. Trigger the detector (e.g., open a door sensor, activate a motion sensor) or press a button on the remote control. The app will confirm successful addition.

3.5 Setting Detector Zone Modes

Each detector can be assigned a specific zone mode to determine how the WiFi Alarm Hub responds when triggered. The table below outlines the different modes:

4. Аперацыя

• Пастаноўка на ахову: Use the Tuya App or the remote control to set the system to 'Away Arm' (all sensors monitored) or 'Home Arm' (perimeter sensors monitored).
• Зняцце з аховы: Use the Tuya App or the remote control to disarm the system.
• Апавяшчэнні: Receive real-time alerts on your smartphone when an alarm is triggered.
• Запланаваная ўстаноўка/зняцце з аховы: Configure automatic arming and disarming times through the Tuya App.

5. Выпраўленне непаладак

• No App Connection: Ensure your WiFi network is 2.4 GHz. This system is not compatible with 5G networks. Verify Bluetooth and Location Services are enabled and authorized for the app.
• Датчыкі не спалучаюцца: Ensure the insulation sheet is removed from the sensor battery. Follow the pairing instructions carefully, ensuring the speaker is in pairing mode and the sensor is triggered within the specified time.
• Ілжывыя трывогі: Check sensor placement and ensure they are securely mounted. Avoid installing door contacts on metal doors, as this can interfere with operation.
• Праблемы з дыстанцыйным кіраваннем: Verify the remote control battery is functional. Ensure the remote is paired correctly with the system.

6. Тэхнічныя характарыстыкі