ISEEVY 8ch HDMI 1080P H.265 H.264 Video Encoder User Manual

1. Уводзіны

This user manual provides detailed instructions for the installation, operation, and maintenance of the ISEEVY 8ch HDMI 1080P H.265 H.264 Video Encoder. This device is designed to convert HDMI video signals into IP streams, supporting various protocols for live streaming, IPTV, and broadcast applications. Please read this manual thoroughly before using the product to ensure proper functionality and to prevent damage.

2. Прадукт скончыўсяview

2.1 Асноўныя магчымасці

• Supports 8 channels of 1080P HDMI video input.
• Advanced H.265 and H.264 video encoding (high/main/baseline profile).
• AAC/MP3 audio encoding.
• Supports multiple streaming protocols: RTMP, RTMPS, RTSP, UDP, RTP, HTTP, FLV, HLS, TS, Multicast, Unicast, SRT.
• Each channel supports up to 2 streams, with resolutions up to 1920x1080P at 60fps.
• Customizable logo, text, or fly text watermark for each channel.

2.2 Знешні выгляд прадукту

Малюнак 2.2.1: Спераду view of the ISEEVY 8ch HDMI Video Encoder, showing the 'Full HD Video Encoder' label and the HDMI input ports.

Малюнак 2.2.2: Задняя частка view of the ISEEVY 8ch HDMI Video Encoder, displaying eight HDMI input ports, a LAN port, and a DC 12V power input.

2.3 Змест пакета

• ISEEVY 8ch HDMI Video Encoder Unit
• Адаптар харчавання (пастаянны ток 12 В)
• Кіраўніцтва карыстальніка (гэты дакумент)
• Кабель Ethernet

3. Настройка

3.1 Фізічныя злучэнні

1. Падключыце крыніцы HDMI: Connect up to eight HDMI video sources (e.g., cameras, DVD players, computers) to the HDMI input ports on the rear of the encoder using standard HDMI cables.
2. Падключэнне да сеткі: Connect the encoder's LAN port to your network router or switch using the provided Ethernet cable. Ensure your network provides DHCP or assign a static IP address later.
3. Падключыце харчаванне: Plug the DC 12V power adapter into the encoder's DC 12V input port and then into a power outlet. The device will power on automatically.

3.2 Network Configuration Overview

The encoder requires a network connection to stream video. It can obtain an IP address automatically via DHCP or be configured with a static IP. For initial setup, it is recommended to connect it to a network with DHCP enabled.

Figure 3.2.1: Typical network setup for the ISEEVY HDMI Encoder, illustrating its connection to a router and various playback devices and platforms.

4. Інструкцыя па эксплуатацыі

4.1 Web Доступ да інтэрфейсу

1. Find IP Address: If your network has DHCP, the encoder will automatically obtain an IP address. You can find this IP address using an IP scanner tool on your network or by checking your router's connected devices list. The default IP address is often 192.168.1.169 if DHCP is not available.
2. Доступ Web інтэрфейс: Адкрыйце a web browser (e.g., Chrome, Firefox) on a computer connected to the same network as the encoder. Enter the encoder's IP address into the browser's address bar and press Enter.
3. Лагін: Імя карыстальніка па змаўчанні адмін і пароль па змаўчанні адмін. It is highly recommended to change the password after the first login for security.

4.2 Configuring Input and Stream Settings

Пасля ўваходу ў web interface, you can configure each HDMI input and its corresponding output streams.

Малюнак 4.2.1: Web interface 'Status' page for Input Port 1, displaying current input resolution, frame rate, and stream URLs.

1. Выберыце ўвод: On the left navigation panel, select the desired input port (e.g., "Input Port 1").
2. Налады кадавальніка: Navigate to the "Encoder" or "Main stream" section for the selected input. Here you can adjust:
   • Тып кадавання: H.265 or H.264.
   • FPS (кадраў у секунду): Typically 30 or 60.
   • Bitrate (kbit/s): Adjust based on desired quality and network bandwidth.
   • дазвол: Output resolution for the stream.
   • Пратакол URLs: Configure RTMP, RTSP, HLS, FLV, TS, and SRT URLs для струменевай перадачы.

Малюнак 4.2.2: Web interface 'Main stream' configuration page, allowing adjustment of encoding parameters like FPS, Bitrate, and various protocol URLs.

3. Налады гуку: Navigate to the "Audio" section to configure audio input, sampling rate, encoder type (AAC/MP3), and bitrate.
4. OSD (экранны дысплей): In the "OSD" section, you can enable and configure text or image overlays (watermarks) for your streams.
5. Дадатковыя налады: The "System" > "Advanced" section provides fine-tuning options for video processing, network settings, and more.

Малюнак 4.2.3: Web interface 'Advanced' settings page, offering detailed configuration options for video, network, and system parameters.

4.3 Live Streaming Platforms and Software Compatibility

The encoder supports various protocols, making it compatible with a wide range of streaming platforms and playback software.

Малюнак 4.3.1: Выпamples of compatible live streaming platforms, including Twitch, Facebook Live, YouTube, and Vimeo.

Малюнак 4.3.2: Выпamples of compatible playback and streaming software, such as OBS, VLC Player, and FFmpeg.

5. Тэхнічнае абслугоўванне

5.1 Ачыстка

• Перад чысткай пераканайцеся, што прылада выключана і адключана ад сеткі.
• Use a soft, dry cloth to wipe the exterior of the encoder.
• Не выкарыстоўвайце вадкія ачышчальнікі, аэразолі або растваральнікі, бо яны могуць пашкодзіць прыладу.

5.2 Абнаўленне прашыўкі

Перыядычна правярайце інфармацыю вытворцы website for firmware updates. Firmware updates can provide new features, performance improvements, and bug fixes. Follow the instructions provided with the firmware update package carefully to avoid damaging the device.

5.3 Захоўванне

When not in use for extended periods, store the encoder in a cool, dry place away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective case to prevent dust accumulation and physical damage.

6. Выпраўленне непаладак

This section addresses common issues you might encounter with the ISEEVY 8ch HDMI Video Encoder.

7. Тэхнічныя характарыстыкі

Detailed technical specifications for the ISEEVY 8ch HDMI Video Encoder.

8. Гарантыя і падтрымка

ISEEVY products are designed for reliability and performance. For warranty information and technical support, please refer to the official ISEEVY webсайт або звярніцеся да аўтарызаванага прадаўца. Захоўвайце чэк аб куплі як пацверджанне пакупкі для гарантыйных прэтэнзій.

For the latest drivers, firmware, and support resources, please visit the official ISEEVY support page.