FLYLINKTECH BD10 6000A 12V Car Jump Starter and Power Bank User Manual

1. Уводзіны

Thank you for choosing the FLYLINKTECH BD10 6000A 12V Car Jump Starter and Power Bank. This device is designed to provide emergency jump-starting for vehicles and serve as a portable power bank for various electronic devices. Please read this manual thoroughly before use to ensure safe and optimal operation.

Image 1.1: The FLYLINKTECH BD10 Jump Starter unit with its smart battery clamps.

2. Інфармацыя па бяспецы

Always observe the following safety precautions to prevent injury or damage to the device or vehicle:

• Не спрабуйце запусціць замерзлы акумулятар ад дажджу.
• Забяспечце падключэнне правільнай палярнасці (чырвоныamp да станоўчага, чорнага склamp to negative). Reverse polarity can cause damage.
• Не дазваляць разумнаму класуampдакранацца адзін да аднаго пры падключэнні да стартара.
• Захоўвайце прыладу далей ад дзяцей.
• Do not expose the device to extreme temperatures (above 60°C / 140°F or below -20°C / -4°F) or direct sunlight for extended periods.
• Не разбірайце і не мадыфікуйце прыладу.
• Use only the provided smart clamps and charging cables.
• Калі прылада моцна награваецца падчас выкарыстання, неадкладна адключыце яе ад сеткі.

Image 2.1: The jump starter incorporates multiple safety features such as spark-proof, reverse polarity, overvoltage, short circuit, overload, and high-temperature protection.

3. Змесціва ўпакоўкі

Праверце наяўнасць усіх прадметаў у камплекце:

• FLYLINKTECH BD10 Jump Starter Unit
• Разумны акумулятар Clamps
• Кабель USB-C да USB-C
• Кабель USB-A да USB-C
• 12V DC Car Charger Adapter
• Кіраўніцтва карыстальніка
• Чахол для захоўвання

Image 3.1: The complete package includes the jump starter, smart clamps, various cables, user manual, and a protective storage case.

4. Настройка і зарадка

4.1 Першапачатковая плата

Before first use, fully charge the jump starter. The device features a 26800mAh battery capacity.

• Connect the provided USB-C cable to the jump starter's USB-C input port.
• Connect the other end of the cable to a compatible USB wall charger (not included). For fastest charging, use a PD 45W charger.
• The LED screen will display the charging status and battery percentage.

4.2 Час зарадкі

Note: A 45W wall charger is not included in the package.

Image 4.1: The device supports PD 45W fast charging, significantly reducing recharge time when using a compatible charger.

5. Інструкцыя па эксплуатацыі

5.1 Запуск аўтамабіля з дапамогай адскока

The FLYLINKTECH BD10 is capable of jump-starting all gas engines and diesel engines up to 12.0L.

1. Забяспечце дастатковы зарад: Check the jump starter's LED screen to ensure it has at least 50% charge.
2. Падключыце Smart Clamps: Устаўце сіні штэкер смарт-клamps into the jump starter's 12V output port. Ensure a firm connection.
3. Падключэнне да аўтамабільнага акумулятара:
   • Прымацаваць чырвоны (+) clamp да станоўчай клемы акумулятара аўтамабіля.
   • Прымацаваць чорны (-) clamp to the vehicle's negative battery terminal.
4. Праверце індыкатар: Разумны клamp indicator light should turn solid green, indicating a correct connection. If it flashes or shows red, check connections and battery status.
5. Press BOOST (if needed): If the vehicle battery is extremely low or completely dead, press the 'BOOST' button on the jump starter. Wait for the indicator light on the smart clamps to turn solid green.
6. Пачаць транспартны сродак: Attempt to start your vehicle. If it doesn't start on the first try, wait 30 seconds before trying again. Do not attempt more than 3 consecutive starts.
7. Выдаліць Clamps: Once the vehicle starts, immediately remove the smart clamps from the car battery, then disconnect them from the jump starter.

Image 5.1: The jump starter connected to a car battery, ready for operation. It supports 6000A peak current, 12V output, and is suitable for a wide range of engines.

Image 5.2: Visual guide illustrating the four steps to jump-start a vehicle: connect the plug, attach clamps, press boost, and start the engine.

5.2 Функцыя знешніх зарадных прылад

The BD10 can charge multiple electronic devices via its USB-A and USB-C ports.

• Выхад USB1: Да 18 Вт (макс.)
• Выхад USB2: Да 18 Вт (макс.)
• Выхад USB-C: Да 45 Вт (PD)

Connect your device using the appropriate USB cable to the desired output port. The LED screen will show 'OUT' and the wattage being drawn.

Image 5.3: The jump starter functioning as a power bank, simultaneously charging a smartphone and a tablet via its USB ports.

5.3 святлодыёдныя ліхтарыкі

The built-in LED flashlight offers three modes: constant light, SOS signal, and strobe light.

• Press and hold the flashlight button to turn on the constant light.
• Press the button again to cycle through SOS and strobe modes.
• Націсніце і ўтрымлівайце яшчэ раз, каб выключыць.

Image 5.4: The integrated LED flashlight provides illumination, an SOS signal, and a strobe function for emergency situations.

5.4 Informative LED Screen

The 6.0-inch LED screen provides real-time information about the device's status:

• Узровень батарэі: Адлюстроўвае зарад батарэі ў працэнтахtage.
• IN/OUT Indicator: Shows whether the device is charging (IN) or discharging (OUT).
• Ватtage Дысплей: Indicates the power (W) being drawn or supplied.
• Папярэджання аб памылках: Displays specific error codes or symbols if an issue occurs.

Image 5.5: The 6.0-inch LED screen provides clear information on battery percentage, input/output status, and power consumption.

6. Тэхнічнае абслугоўванне

• Рэгулярна зараджайце: To prolong battery life, recharge the jump starter every 3-6 months, even if not in use.
• захоўванне: Store the device in its protective case in a cool, dry place, away from direct sunlight and moisture.
• Уборка: Працірайце прыладу мяккай сухой тканінай. Не выкарыстоўвайце агрэсіўныя хімічныя рэчывы або абразіўныя матэрыялы.
• Clamp Сыход: Пераканайцеся, што разумны класamps are clean and free of corrosion before and after each use.

7. Выпраўленне непаладак

The device features multiple alarm situations indicated by audible signals and screen displays:

• Нізкі абtagе абарона: Audible signal "3". Recharge the device.
• Знешні выпtage Exceeds Vehicle Voltage: Audible signal "4". Check vehicle battery voltage.
• Абарона ад кароткага замыкання: Audible signal "5". Check clamp connections for short circuits.
• Safety Mode Activated: Audible signal "6". Device has entered safety mode due to an issue.
• Абарона ад перагрузкі па току: Audible signal "7". Reduce load or check connections.
• Сігнал аб высокай / нізкай тэмпературы: Audible signal "8". Allow device to return to operating temperature range (-20°C to 60°C).
• Reverse Connection: Audible signal "9". Correct the clamp палярнасць.

Выява 7.1: Канецview of the device's multi-alarm system, indicating various protection states with unique audible signals.

Калі пасля выканання гэтых крокаў праблемы не знікнуць, звярніцеся ў службу падтрымкі кліентаў.

8. Тэхнічныя характарыстыкі

Image 8.1: The device is designed to operate reliably in extreme climates, from -20°C (-4°F) to 60°C (140°F).

9. Гарантыя і падтрымка

FLYLINKTECH is committed to providing high-quality products. For any questions, technical assistance, or warranty claims, please refer to the contact information provided with your purchase or visit the official FLYLINKTECH webсайт. Калі ласка, захавайце пацвярджэнне пакупкі для гарантыйных мэт.