BIGTREETECH Manta E3EZ + CB1 eMMC Control Board Kit User Manual

1. Уводзіны

This manual provides comprehensive instructions for the installation, operation, and maintenance of the BIGTREETECH Manta E3EZ + CB1 eMMC Control Board Kit. This kit is designed to enhance the performance of Ender-3 V2, Ender-3 Pro, Ender-3, and Voron 3D Printers, particularly for users looking to run Klipper firmware.

The Manta E3EZ control board features an ARM Cortex-M0+ series STM32G0B1RE master chip, offering robust performance and compatibility. Paired with the CB1 eMMC core control board, it provides a stable and efficient solution for advanced 3D printing applications.

2. Асноўныя магчымасці

• Інтэграванае рашэнне: This kit includes both the BIGTREETECH Manta E3EZ silent control board and the CB1 eMMC core control board, specifically designed for seamless integration with Ender-3 series 3D printers to run Klipper firmware.
• High-Performance Main Chip: The Manta E3EZ board is equipped with an ARM Cortex-M0+ series STM32G0B1RE master chip, boasting a 32-bit main frequency of 64MHz, ensuring reliable and fast processing.
• Надзейная энергазабеспячэнне: The board supports a maximum motor power supply of 56V, providing ample power for various motor configurations.
• BTB Connection: The main control board and core board utilize a BTB (Board-to-Board) connection, ensuring perfect pairing with the BIGTREETECH CB1 core board for stable communication.
• Advanced eMMC Storage: The BIGTREETECH CB1 eMMC incorporates Samsung Electronics' eMMC5.1 technology, delivering high-speed data transfer with a read speed of 300MB/s and a write speed of 200MB/s. This storage method offers enhanced stability and durability, mitigating issues associated with traditional card slot damage.
• Эфектыўнае энергаспажыванне: The CB1 eMMC operates with low power consumption, using only 0.5W.
• Powerful CB1 Processor: The BIGTREETECH CB1 eMMC features a quad-core 64-bit ARM Cortex-A53 @ 1.5GHz processor, 1GB DDR3 memory chip, and 32GB storage, providing powerful performance for demanding applications.
• Усебаковая сувязь: Includes an onboard 100M Ethernet interface and supports WIFI transmission for flexible networking options.

3. Кампаненты і інтэрфейсы прадукту

3.1. паview of Manta E3EZ and CB1 eMMC

The image below displays the BIGTREETECH Manta E3EZ control board and the CB1 eMMC core control board, highlighting their compact design and integrated nature.

Figure 3.1: BIGTREETECH Manta E3EZ and CB1 eMMC Control Board Kit.

3.2. High-Performance Chipset

The Manta E3EZ board is powered by a 32-bit, 64 MHz ARM Cortex-M0+ series STM32G0B1RE MCU. This powerful microcontroller ensures smooth and efficient operation for your 3D printer. It supports both Marlin and Klipper firmware, offering flexibility based on user preference.

Figure 3.2: Detail of the 32-bit MCU on the Manta E3EZ board.

3.3. EZ Driver Slots

The board features 5 mistake-proof EZ Driver Slots, simplifying driver installation. These slots allow for easy selection between SPI and UART in firmware without the need for jumpers, reducing the risk of incorrect insertion.

Figure 3.3: EZ Driver Slots for simplified driver installation.

3.4. Rich Connectivity and Interface Diagram

The Manta E3EZ board offers extensive connectivity options to support various 3D printer accessories and configurations. The diagrams below illustrate the rich array of ports and their functions, including motor drivers, fan headers, endstops, and communication interfaces.

Figure 3.4: Rich Connectivity Overview.

Figure 3.5: Detailed Interface Diagram with port labels.

3.5. CB1 eMMC Specifications

The CB1 eMMC module significantly enhances the kit's capabilities with its high-speed Samsung eMMC 5.1 technology, offering fast read/write speeds and stable storage. It also features a powerful quad-core processor and ample memory for complex tasks.

Figure 3.6: CB1 eMMC Module Specifications.

3.6. Compatibility and Upgrades

The Manta E3EZ board is designed to work seamlessly with other Manta series motherboards, and the CB1 eMMC offers an easy upgrade path from previous versions, providing improved data storage and reliability.

Figure 3.7: Compatibility with Manta Series Motherboards.

Figure 3.8: CB1 eMMC Heat Sink Compatibility.

Figure 3.9: Upgrading from CB1 V2.2 to CB1 eMMC.

4. Кіраўніцтва па наладцы

4.1. Кантрольны спіс перад усталёўкай

• Ensure your 3D printer is powered off and disconnected from the mains.
• Gather necessary tools: screwdriver set, wire cutters/strippers, multimeter (optional).
• Familiarize yourself with your 3D printer's existing wiring and mainboard layout.
• Download the latest firmware (Klipper or Marlin) compatible with Manta E3EZ from the official BIGTREETECH GitHub repository.

4.2. Этапы ўстаноўкі

1. Зняць старую матчыну плату: Carefully disconnect all wires from your existing 3D printer mainboard. Take photos for reference if needed. Unscrew and remove the old mainboard.
2. Install Manta E3EZ: Mount the BIGTREETECH Manta E3EZ board into the designated mainboard slot of your Ender-3 series or Voron printer. Ensure it is securely fastened.
3. Connect CB1 eMMC: Insert the CB1 eMMC core control board into the dedicated BTB socket on the Manta E3EZ board. Ensure proper alignment and firm connection.
4. Кампаненты дроту: Reconnect all motor, endstop, heater, thermistor, and fan wires to their corresponding ports on the Manta E3EZ board, referring to the interface diagram (Figure 3.5). Pay close attention to polarity for power connections.
5. Падключэнне крыніцы харчавання: Connect the printer's power supply to the Manta E3EZ board. Verify voltage settings if applicable.
6. Першапачатковае ўключэнне: Before connecting to a computer, briefly power on the printer to check for any immediate issues (e.g., smoke, unusual smells). If all seems well, power off.
7. Прашыўка прашыўкі: Connect the board to your computer via USB. Follow the specific instructions provided by BIGTREETECH for flashing Klipper or Marlin firmware onto the Manta E3EZ board. This typically involves placing a firmware file on an SD card and inserting it into the board, or using a DFU utility.
8. Канфігурацыя: Configure the firmware settings (e.g., printer dimensions, motor steps, thermistor types) according to your specific printer model and components.

5. Інструкцыя па эксплуатацыі

5.1. Klipper Firmware Operation

For Klipper users, the CB1 eMMC acts as the host for the Klipper firmware. You will typically interact with Klipper via a web interface (e.g., Mainsail or Fluidd) accessible from your computer or a network device.

• Падключэнне да сеткі: Ensure the CB1 eMMC is connected to your network via Ethernet or Wi-Fi.
• Доступ Web інтэрфейс: Адкрыйце a web browser and navigate to the IP address of your CB1 eMMC (or the hostname if configured).
• Printer Control: Выкарыстоўвайце web interface to control printer movements, temperatures, and start/stop prints.
• G-code Upload: Загрузіць G-код files directly to the CB1 eMMC via the web interface for printing.

5.2. Marlin Firmware Operation (if applicable)

If you choose to use Marlin firmware, operation will be similar to other Marlin-based mainboards, typically through an LCD screen or a host software like Pronterface or OctoPrint.

• LCD Control: Navigate menus and control printer functions directly from the connected LCD screen.
• USB-злучэнне: Connect the Manta E3EZ to your computer via USB for direct control and G-code sending using host software.

5.3. Афіцыйнае відэа прадукту

For a visual guide on the BIGTREETECH Manta E3EZ MotherBoard and its support for Klipper with CB1, please watch the official product video below. This video provides an overview of the board's features and capabilities.

6. Тэхнічнае абслугоўванне

• Захоўваць у чысціні: Regularly clean the board and surrounding area to prevent dust and debris buildup, which can affect performance and lead to overheating. Use compressed air or a soft brush.
• Праверце злучэнні: Periodically inspect all wire connections to ensure they are secure and free from corrosion. Loose connections can cause intermittent issues or damage.
• Абнаўленні прашыўкі: Keep your firmware updated to the latest stable version. Check the official BIGTREETECH GitHub for release notes and update procedures.
• Маніторынг тэмпературы: Ensure adequate cooling for the stepper drivers and main chip, especially during long prints. Verify fan operation.
• Avoid Static Discharge: Always handle the board with anti-static precautions (e.g., grounding wrist strap) to prevent damage to sensitive electronic components.

7. Выпраўленне непаладак

7.1. Распаўсюджаныя праблемы і рашэнні

If you encounter issues not listed here, please refer to the official BIGTREETECH documentation or community forums for further assistance.

8. Тэхнічныя характарыстыкі

9. Гарантыя і падтрымка

BIGTREETECH products typically come with a manufacturer's warranty. Please refer to the official BIGTREETECH webна сайце або ў дакументацыі па куплі, каб даведацца пра канкрэтныя гарантыйныя ўмовы.

For technical support, firmware downloads, and additional resources, please visit the official BIGTREETECH website or their GitHub repository:

• BIGTREETECH Official Webсайт
• BIGTREETECH GitHub Repository

Community forums and online resources can also be valuable for troubleshooting and sharing experiences with other users.