Genérico Air Plus Pneumatic Hospital Mattress (HF605/HF6001) Instruction Manual

1. Уводзіны

This manual provides essential instructions for the proper installation, operation, and maintenance of your Genérico Air Plus Pneumatic Hospital Mattress (Models HF605 Compressor and HF6001 Mattress). This system is designed to provide alternating pressure therapy, aiding in the prevention and treatment of pressure ulcers (bedsores) for patients requiring prolonged bed rest. Please read this manual thoroughly before use to ensure safe and effective operation.

Выява 1: Канецview of the Genérico Air Plus Pneumatic Hospital Mattress system, including the mattress, compressor, and packaging.

2. Інфармацыя па бяспецы

Always follow basic safety precautions when using electrical products, especially when children are present. Read all instructions before use.

• Электрабяспека: Ensure the power outlet matches the specified voltage (110V). Do not use extension cords unless absolutely necessary and ensure they are rated for the appliance.
• Ўздзеянне вады: Keep the compressor unit away from water or liquids. The mattress is water-resistant, but the compressor is not.
• Вентыляцыя: Ensure the compressor unit has adequate ventilation. Do not block air vents.
• Patient Weight Limit: Do not exceed the maximum weight capacity of 130 kg (286 lbs) for the mattress.
• Вострыя прадметы: Keep sharp objects away from the mattress to prevent punctures.
• Уборка: Disconnect the compressor from the power supply before cleaning.
• Медыцынская кансультацыя: This product is intended to aid in pressure ulcer prevention and treatment. Consult a healthcare professional for appropriate patient care.

3. Змесціва ўпакоўкі

Пасля адкрыцця ўпакоўкі пераканайцеся, што ўсе кампаненты ёсць у наяўнасці і не пашкоджаны:

• Pneumatic Mattress (Model HF6001)
• Air Compressor Unit (Model HF605)
• Air Hoses (connecting mattress to compressor)
• Шнур харчавання
• Repair Kit (patch material)
• Інструкцыя па эксплуатацыі (гэты дакумент)

Image 2: All components of the Air Plus system, including the mattress, compressor, air hoses, and a small repair kit.

4. Інструкцыі па ўсталёўцы

1. Падрыхтуйце ложак: Place the pneumatic mattress on top of a standard bed mattress. Ensure the mattress is laid flat with the air cells facing upwards.
2. Position the Compressor: Place the compressor unit on a flat, stable surface, either on the floor or hung at the foot of the bed using its integrated hooks (if available). Ensure it is in a location where its air vents are not obstructed.
3. Падключыце паветраныя шлангі: Connect the two air hoses from the mattress to the air outlets on the compressor unit. Ensure a secure connection.
4. Падключыце харчаванне: Plug the power cord into the compressor unit, then plug the other end into a grounded 110V electrical outlet.
5. Initial Inflation: Turn on the compressor unit using the power switch. The mattress will begin to inflate. Allow approximately 20-30 minutes for the mattress to fully inflate and for the alternating pressure cycle to stabilize before placing a patient on it.

5. Інструкцыя па эксплуатацыі

The Air Plus system operates on an alternating pressure principle to continuously redistribute pressure points, promoting blood circulation and preventing skin breakdown.

• Уключэнне/выключэнне харчавання: Use the main power switch on the compressor unit to turn the system on or off.
• Рэгуляванне ціску: The compressor unit features a pressure adjustment dial. Turn the dial to increase or decrease the firmness of the mattress. Adjust the pressure according to patient comfort and clinical guidelines. A good starting point is to adjust until a hand placed under the patient's sacrum can feel the alternating pressure without bottoming out.
• Alternating Cycle: The system automatically inflates and deflates alternating air cells in a cycle (typically 10-12 minutes, as per specifications). This continuous movement helps relieve pressure on vulnerable areas.

Image 3: Diagram showing the alternating inflation and deflation of air cells (A, B, C) over a 200-second cycle, demonstrating how the system prevents prolonged fixed pressure.

6. Тэхнічнае абслугоўванне

• Cleaning the Mattress: Disconnect the mattress from the compressor. Clean the mattress surface with a mild disinfectant solution and a soft cloth. Do not immerse the mattress in water. Allow it to air dry completely before re-connecting or storing.
• Ачыстка кампрэсара: Wipe the exterior of the compressor unit with a damp тканіна. Не выкарыстоўвайце абразіўныя ачышчальнікі і не апускайце прыладу ў ваду. Перад чысткай пераканайцеся, што прылада адключана ад сеткі.
• захоўванне: When not in use, deflate the mattress, fold it neatly, and store it in a cool, dry place away from direct sunlight and sharp objects. Store the compressor unit separately.
• Рамонтны камплект: In case of minor punctures, use the provided repair kit. Clean the area around the puncture, apply the patch material, and allow it to dry thoroughly before re-inflating.

7. Выпраўленне непаладак

8. Тэхнічныя характарыстыкі

Refer to the table below for detailed technical specifications of the Air Plus system.

Image 4: Detailed technical specifications for both the HF605 Compressor and the HF6001 Mattress, including dimensions, weight, power, and material.

9. Гарантыя і падтрымка

Каб атрымаць інфармацыю аб гарантыі, тэхнічнай падтрымцы або абслугоўванні, звярніцеся непасрэдна да прадаўца або вытворцы. Захоўвайце чэк аб куплі як пацверджанне пакупкі.

Manufacturer: Montserrat

Seller: Cirurgica Medeiros (as per Amazon listing)