Інструкцыя па эксплуатацыі пашыральніка Wi-Fi Ruijie Reyee RG-EW1200R / RAP1261

1. Прадукт скончыўсяview

The Ruijie Reyee RG-EW1200R, also known as RAP1261, is an AX3000 Wi-Fi 6 dual-band Gigabit in-wall Access Point (AP) designed to extend and enhance wireless network coverage. It features built-in antennas and supports both 2.4GHz (300Mbps) and 5GHz (867Mbps) dual-radio frequencies, adhering to 802.11a/b/g/n/ac Wave1/Wave2/ax protocols. This device includes a 10/100/1000 Base-T port and supports both AP and routing modes, along with layer 2 and layer 3 roaming capabilities. Management is facilitated through Reyee unified networking and the Ruijie Cloud app.

The unit is designed for wall-mounted installation and supports 802.3at Power over Ethernet (PoE) input, with a maximum power consumption of less than 18W. When using a non-standard PoE adapter, it is essential to configure the "PoE settings" to "IEEE 802.3at" via the device's web interface to ensure proper operation.

2. Настройка і ўстаноўка

This section outlines the general steps for installing and setting up your Ruijie Reyee RAP1261 in-wall AP. Professional installation by a qualified technician is recommended due to the in-wall nature of the device and its power requirements.

2.1 Распакоўка і кампаненты

Праверце наяўнасць усіх кампанентаў у камплекце:

• Ruijie Reyee RAP1261 In-wall AP unit
• Mounting hardware (if included, typically for in-wall installation)
• Кароткае кіраўніцтва па запуску (падрабязныя інструкцыі глядзіце ў гэтым кіраўніцтве)

2.2 Фізічная ўстаноўка

The RAP1261 is designed for in-wall installation. This typically involves:

1. Power Source Preparation: Ensure a suitable 802.3at PoE-enabled network switch or injector is available to provide power to the AP. The power supply output must exceed the AP's maximum power consumption of 18W.
2. Насценны мантаж: Carefully follow the provided mounting instructions to secure the AP within a standard wall outlet box.
3. Падключэнне да сеткі: Connect an Ethernet cable from your PoE source to the WAN/PoE port on the back of the RAP1261.

Малюнак 1: Тыл view of the Ruijie Reyee RAP1261 In-wall AP. This image displays the back panel of the device, highlighting the WAN/PoE Ethernet port for network and power connection, and the mounting tabs for in-wall installation. A label area is also visible at the bottom.

2.3 Пачатковая канфігурацыя

After physical installation and power-up:

• Уключэнне: The device will power on automatically when connected to a PoE source. Observe the LED indicators for status.
• Доступ да сеткі: Connect a device (e.g., laptop, smartphone) to the default Wi-Fi network broadcast by the AP (SSID and password typically found on a label on the device or in the quick start guide).
• Web Доступ да інтэрфейсу: Адкрыйце a web browser and navigate to the default IP address of the AP (e.g., 192.168.1.1 or similar, refer to the quick start guide). Log in using the default credentials.
• PoE Settings (if applicable): If using a non-standard PoE adapter, navigate to the "PoE settings" in the web interface and set the "PoE mode" to "IEEE 802.3at".
• Basic Wi-Fi Configuration: Configure your desired Wi-Fi network name (SSID), password, and security settings for both 2.4GHz and 5GHz bands.
• Рэжым працы: Select between AP mode or routing mode based on your network requirements.
• Кіраванне праграмамі: Download the Ruijie Cloud app or Reyee Router App from your device's app store. Follow the in-app instructions to add and manage your RAP1261.

3. Інструкцыя па эксплуатацыі

The Ruijie Reyee RAP1261 offers various functionalities to optimize your wireless network.

3.1 Падключэнне да Wi-Fi

• Праца ў двух дыяпазонах: The AP broadcasts Wi-Fi on both 2.4GHz and 5GHz frequencies. Connect your devices to the appropriate band for optimal performance. The 5GHz band offers higher speeds but shorter range, while 2.4GHz provides wider coverage.
• Mesh Functionality: If deployed as part of a Reyee Mesh network, the AP will seamlessly integrate to provide extended and unified Wi-Fi coverage.

3.2 Management via Reyee App / Ruijie Cloud

The dedicated mobile application provides comprehensive control over your AP:

• Маніторынг сеткі: View connected devices, network traffic, and AP status.
• Configuration Changes: Modify Wi-Fi settings, operating modes, and other network parameters.
• Абнаўленні прашыўкі: Праверце і ўсталюйце апошнюю версію прашыўкі, каб забяспечыць аптымальную прадукцыйнасць і бяспеку.
• Кіраванне святлодыёдам: Adjust or disable the LED indicators on the device for discreet operation.

3.3 Дадатковыя магчымасці

Depending on your configuration and network setup, the RAP1261 supports:

• Рэжым AP: Functions as a wireless access point, extending an existing wired network wirelessly.
• Routing Mode: Can act as a basic router for smaller networks.
• Layer 2 and Layer 3 Roaming: Facilitates seamless transitions for wireless clients between multiple APs in a larger network.

4. Тэхнічнае абслугоўванне

Regular maintenance ensures the longevity and optimal performance of your Ruijie Reyee RAP1261.

• Захоўваць у чысціні: Gently wipe the exterior of the device with a soft, dry cloth. Avoid using liquid cleaners or aerosols.
• Абнаўленні прашыўкі: Periodically check for and install firmware updates via the Ruijie Cloud app or web інтэрфейс. Абнаўленні прашыўкі часта ўключаюць паляпшэнні прадукцыйнасці, патчы бяспекі і новыя функцыі.
• Умовы навакольнага асяроддзя: Ensure the device is operating within its specified temperature and humidity ranges to prevent overheating or damage.

5. Выпраўленне непаладак

This section addresses common issues you might encounter with your RAP1261.

5.1 Няма харчавання / Прылада не ўключаецца

• Праверце падключэнне PoE: Ensure the Ethernet cable is securely connected to the WAN/PoE port and to a functioning 802.3at PoE source.
• Праверце крыніцу PoE: Confirm that your PoE switch or injector is powered on and providing sufficient power (output > 18W).
• Non-Standard PoE: If using a non-standard PoE adapter, ensure the "PoE mode" is set to "IEEE 802.3at" in the device's web інтэрфейс.

5.2 No Wi-Fi Signal or Connectivity Issues

• Праверце святлодыёдныя індыкатары: Refer to the device's LED status lights (if visible) to determine its operational state. Consult the quick start guide for LED meanings.
• Праверце канфігурацыю: Увайдзіце ў web interface or Ruijie Cloud app to ensure Wi-Fi settings (SSID, password, security type) are correctly configured and enabled.
• Перазагрузка прылады: Power cycle the AP by disconnecting and reconnecting the PoE cable.
• Перашкоды: Ensure there are no major sources of interference (e.g., microwaves, cordless phones) near the AP.

5.3 Павольная хуткасць Wi-Fi

• Выбар групы: Ensure high-bandwidth devices are connected to the 5GHz band if possible.
• Перашкоды канала: Use the Ruijie Cloud app or web interface to perform a channel scan and select less congested Wi-Fi channels.
• Прашыўка: Ensure the AP has the latest firmware installed.
• Нагрузка на сетку: Праверце, ці іншыя прылады ў вашай сетцы спажываюць значную прапускную здольнасць.

5.4 Немагчыма атрымаць доступ Web Interface or App

• IP-адрас: Confirm you are using the correct IP address for the AP. If the AP is in routing mode, its IP might be different from the default.
• Падключэнне да сеткі: Ensure your device is connected to the AP's network (either wired or wirelessly).
• Брандмаўэр/Антывірус: Часова адключыце любы брандмаўэр або антывіруснае праграмнае забеспячэнне на вашым кампутары, якія могуць блакаваць доступ.
• Скінуць: As a last resort, perform a factory reset (refer to the quick start guide for the reset procedure). This will revert all settings to default.

6. Тэхнічныя характарыстыкі

7. Гарантыя і падтрымка

For warranty information, please refer to the documentation provided with your purchase or contact your reseller. Support resources, including FAQs and further technical assistance, may be available through the Ruijie official website or the Reyee Cloud app.